CC="gcc -m32 -march=i586 -mtune=generic -DTCL_UTF_MAX=6"
CXX="g++ -m32 -march=i586 -mtune=generic -fno-exceptions -fno-rtti -DTCL_UTF_MAX=6"
NM=nm
export STRIP AR RANLIB CC CXX RC NM

SUBDIRS="tcl libressl tcludp tdom tclvfs tclkit tls freetype SDL2 sdl2tk"
SUBDIRS="${SUBDIRS} 3dcanvas tkimg tktable tktreectrl tkpath itk v4l2 tkhtml"
SUBDIRS="${SUBDIRS} tcluvc"

ACTION="$1"
if test -z "$ACTION" ; then
  ACTION=build
fi

clean_build_stamps() {
................................................................................
  done
}

if test "$ACTION" = "init" ; then
  echo "copying sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"



    rsync -a "${AWDIR}/jni/$i" .

  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "sync" ; then
  echo "syncing sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"



    rsync -utlpr "${AWDIR}/jni/$i" .

  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "clean" -o "$ACTION" = "distclean" ; then
................................................................................
) || fail

echo -n "build libressl (static, pic) ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd libressl





  test -e build-stamp && echo >&3 "already done" && exit 0
  # aclocal/automake madness requires this
  touch configure.ac aclocal.m4 configure Makefile.am Makefile.in
  ./configure --prefix=${PFX} --build=i586-linux-gnu --with-pic \
    --disable-shared --with-openssldir=/etc/pki/tls || exit 1
  # shrink SUBDIRS
  perl -pi -e 's/^SUBDIRS.*/SUBDIRS = crypto ssl include/g' Makefile
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
................................................................................
      --with-tcl=${HERE}/tcl/unix --with-tk=${HERE}/sdl2tk/sdl || exit 1
  fi
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail































echo -n "strip binaries ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  set -x
  $STRIP ${PFX_HERE}/bin/tclsh* ${PFX_HERE}/bin/sdl2wish* ${PFX_HERE}/lib/*/*.so
................................................................................
  if test -d ${PFX_HERE}/lib/v4l2* ; then
    cp -rp ${PFX_HERE}/lib/v4l2* assets
  fi
  cp -rp ${PFX_HERE}/lib/Tkhtml* assets
  if test -d ${PFX_HERE}/lib/tcluvc* ; then
    cp -rp ${PFX_HERE}/lib/tcluvc* assets
  fi

  # Tcl-only directories
  cp -rp ${AWDIR}/assets/bwidget* assets
  cp -rp ${AWDIR}/assets/gridplus* assets
  cp -rp ${AWDIR}/assets/icons* assets
  cp -rp ${AWDIR}/assets/iwidgets* assets
  cp -rp ${AWDIR}/assets/pdf4tcl* assets
  cp -rp ${AWDIR}/assets/tcllib* assets

CC="gcc -m32 -march=i586 -mtune=generic -DTCL_UTF_MAX=6"
CXX="g++ -m32 -march=i586 -mtune=generic -fno-exceptions -fno-rtti -DTCL_UTF_MAX=6"
NM=nm
export STRIP AR RANLIB CC CXX RC NM

SUBDIRS="tcl libressl tcludp tdom tclvfs tclkit tls freetype SDL2 sdl2tk"
SUBDIRS="${SUBDIRS} 3dcanvas tkimg tktable tktreectrl tkpath itk v4l2 tkhtml"
SUBDIRS="${SUBDIRS} tcluvc dbus-tcl dbus-intf"

ACTION="$1"
if test -z "$ACTION" ; then
  ACTION=build
fi

clean_build_stamps() {
................................................................................
  done
}

if test "$ACTION" = "init" ; then
  echo "copying sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"
    if test -d "${AWDIR}/undroid/dbus/$i" ; then
      rsync -a "${AWDIR}/undroid/dbus/$i" .
    else
      rsync -a "${AWDIR}/jni/$i" .
    fi
  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "sync" ; then
  echo "syncing sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"
    if test -d "${AWDIR}/undroid/dbus/$i" ; then
      rsync -utlpr "${AWDIR}/undroid/dbus/$i" .
    else
      rsync -utlpr "${AWDIR}/jni/$i" .
    fi
  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "clean" -o "$ACTION" = "distclean" ; then
................................................................................
) || fail

echo -n "build libressl (static, pic) ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd libressl
  ASMOPT=""
  GCCVER=$($CC --version | awk '/GCC/ {print ($3+0.0)*10;}')
  if test $GCCVER -lt 44 ; then
    ASMOPT="--disable-asm"
  fi
  test -e build-stamp && echo >&3 "already done" && exit 0
  # aclocal/automake madness requires this
  touch configure.ac aclocal.m4 configure Makefile.am Makefile.in
  ./configure --prefix=${PFX} --build=i586-linux-gnu --with-pic $ASMOPT \
    --disable-shared --with-openssldir=/etc/pki/tls || exit 1
  # shrink SUBDIRS
  perl -pi -e 's/^SUBDIRS.*/SUBDIRS = crypto ssl include/g' Makefile
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
................................................................................
      --with-tcl=${HERE}/tcl/unix --with-tk=${HERE}/sdl2tk/sdl || exit 1
  fi
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail

echo -n "build dbus-tcl ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd dbus-tcl
  test -e build-stamp && echo >&3 "already done" && exit 0
  PATH=${PFX_HERE}/bin:$PATH
  DESTDIR=${HERE} ./configure --build=i586-linux-gnu --prefix=${PFX} \
    --with-tcl=${HERE}/tcl/unix || exit 1
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail

echo -n "build dbus-intf ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd dbus-intf
  test -e build-stamp && echo >&3 "already done" && exit 0
  PATH=${PFX_HERE}/bin:$PATH
  DESTDIR=${HERE} ./configure --build=i586-linux-gnu --prefix=${PFX} \
    --with-tcl=${HERE}/tcl/unix || exit 1
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail

echo -n "strip binaries ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  set -x
  $STRIP ${PFX_HERE}/bin/tclsh* ${PFX_HERE}/bin/sdl2wish* ${PFX_HERE}/lib/*/*.so
................................................................................
  if test -d ${PFX_HERE}/lib/v4l2* ; then
    cp -rp ${PFX_HERE}/lib/v4l2* assets
  fi
  cp -rp ${PFX_HERE}/lib/Tkhtml* assets
  if test -d ${PFX_HERE}/lib/tcluvc* ; then
    cp -rp ${PFX_HERE}/lib/tcluvc* assets
  fi
  cp -rp ${PFX_HERE}/lib/dbus* assets
  # Tcl-only directories
  cp -rp ${AWDIR}/assets/bwidget* assets
  cp -rp ${AWDIR}/assets/gridplus* assets
  cp -rp ${AWDIR}/assets/icons* assets
  cp -rp ${AWDIR}/assets/iwidgets* assets
  cp -rp ${AWDIR}/assets/pdf4tcl* assets
  cp -rp ${AWDIR}/assets/tcllib* assets

CC="gcc -m64 -DTCL_UTF_MAX=6"
CXX="g++ -m64 -fno-exceptions -fno-rtti -DTCL_UTF_MAX=6"
NM=nm
export STRIP AR RANLIB CC CXX RC NM

SUBDIRS="tcl libressl tcludp tdom tclvfs tclkit tls freetype SDL2 sdl2tk"
SUBDIRS="${SUBDIRS} 3dcanvas tkimg tktable tktreectrl tkpath itk v4l2 tkhtml"
SUBDIRS="${SUBDIRS} tcluvc"

ACTION="$1"
if test -z "$ACTION" ; then
  ACTION=build
fi

clean_build_stamps() {
................................................................................
  done
}

if test "$ACTION" = "init" ; then
  echo "copying sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"



    rsync -a "${AWDIR}/jni/$i" .

  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "sync" ; then
  echo "syncing sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"



    rsync -utlpr "${AWDIR}/jni/$i" .

  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "clean" -o "$ACTION" = "distclean" ; then
................................................................................
) || fail

echo -n "build libressl (static, pic) ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd libressl





  test -e build-stamp && echo >&3 "already done" && exit 0
  # aclocal/automake madness requires this
  touch configure.ac aclocal.m4 configure Makefile.am Makefile.in
  ./configure --prefix=${PFX} --build=x86_64-linux-gnu --with-pic \
    --disable-shared --with-openssldir=/etc/pki/tls || exit 1
  # shrink SUBDIRS
  perl -pi -e 's/^SUBDIRS.*/SUBDIRS = crypto ssl include/g' Makefile
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
................................................................................
      --with-tcl=${HERE}/tcl/unix --with-tk=${HERE}/sdl2tk/sdl || exit 1
  fi
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail































echo -n "strip binaries ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  set -x
  $STRIP ${PFX_HERE}/bin/tclsh* ${PFX_HERE}/bin/sdl2wish* ${PFX_HERE}/lib/*/*.so
................................................................................
  if test -d ${PFX_HERE}/lib/v4l2* ; then
    cp -rp ${PFX_HERE}/lib/v4l2* assets
  fi
  cp -rp ${PFX_HERE}/lib/Tkhtml* assets
  if test -d ${PFX_HERE}/lib/tcluvc* ; then
    cp -rp ${PFX_HERE}/lib/tcluvc* assets
  fi

  # Tcl-only directories
  cp -rp ${AWDIR}/assets/bwidget* assets
  cp -rp ${AWDIR}/assets/gridplus* assets
  cp -rp ${AWDIR}/assets/icons* assets
  cp -rp ${AWDIR}/assets/iwidgets* assets
  cp -rp ${AWDIR}/assets/pdf4tcl* assets
  cp -rp ${AWDIR}/assets/tcllib* assets

CC="gcc -m64 -DTCL_UTF_MAX=6"
CXX="g++ -m64 -fno-exceptions -fno-rtti -DTCL_UTF_MAX=6"
NM=nm
export STRIP AR RANLIB CC CXX RC NM

SUBDIRS="tcl libressl tcludp tdom tclvfs tclkit tls freetype SDL2 sdl2tk"
SUBDIRS="${SUBDIRS} 3dcanvas tkimg tktable tktreectrl tkpath itk v4l2 tkhtml"
SUBDIRS="${SUBDIRS} tcluvc dbus-tcl dbus-intf"

ACTION="$1"
if test -z "$ACTION" ; then
  ACTION=build
fi

clean_build_stamps() {
................................................................................
  done
}

if test "$ACTION" = "init" ; then
  echo "copying sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"
    if test -d "${AWDIR}/undroid/dbus/$i" ; then
      rsync -a "${AWDIR}/undroid/dbus/$i" .
    else
      rsync -a "${AWDIR}/jni/$i" .
    fi
  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "sync" ; then
  echo "syncing sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"
    if test -d "${AWDIR}/undroid/dbus/$i" ; then
      rsync -utlpr "${AWDIR}/undroid/dbus/$i" .
    else
      rsync -utlpr "${AWDIR}/jni/$i" .
    fi
  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "clean" -o "$ACTION" = "distclean" ; then
................................................................................
) || fail

echo -n "build libressl (static, pic) ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd libressl
  ASMOPT=""
  GCCVER=$($CC --version | awk '/GCC/ {print ($3+0.0)*10;}')
  if test $GCCVER -lt 44 ; then
    ASMOPT="--disable-asm"
  fi
  test -e build-stamp && echo >&3 "already done" && exit 0
  # aclocal/automake madness requires this
  touch configure.ac aclocal.m4 configure Makefile.am Makefile.in
  ./configure --prefix=${PFX} --build=x86_64-linux-gnu --with-pic $ASMOPT \
    --disable-shared --with-openssldir=/etc/pki/tls || exit 1
  # shrink SUBDIRS
  perl -pi -e 's/^SUBDIRS.*/SUBDIRS = crypto ssl include/g' Makefile
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
................................................................................
      --with-tcl=${HERE}/tcl/unix --with-tk=${HERE}/sdl2tk/sdl || exit 1
  fi
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail

echo -n "build dbus-tcl ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd dbus-tcl
  test -e build-stamp && echo >&3 "already done" && exit 0
  PATH=${PFX_HERE}/bin:$PATH
  DESTDIR=${HERE} ./configure --build=x86_64-linux-gnu --prefix=${PFX} \
    --with-tcl=${HERE}/tcl/unix || exit 1
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail

echo -n "build dbus-intf ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd dbus-intf
  test -e build-stamp && echo >&3 "already done" && exit 0
  PATH=${PFX_HERE}/bin:$PATH
  DESTDIR=${HERE} ./configure --build=x86_64-linux-gnu --prefix=${PFX} \
    --with-tcl=${HERE}/tcl/unix || exit 1
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail

echo -n "strip binaries ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  set -x
  $STRIP ${PFX_HERE}/bin/tclsh* ${PFX_HERE}/bin/sdl2wish* ${PFX_HERE}/lib/*/*.so
................................................................................
  if test -d ${PFX_HERE}/lib/v4l2* ; then
    cp -rp ${PFX_HERE}/lib/v4l2* assets
  fi
  cp -rp ${PFX_HERE}/lib/Tkhtml* assets
  if test -d ${PFX_HERE}/lib/tcluvc* ; then
    cp -rp ${PFX_HERE}/lib/tcluvc* assets
  fi
  cp -rp ${PFX_HERE}/lib/dbus* assets
  # Tcl-only directories
  cp -rp ${AWDIR}/assets/bwidget* assets
  cp -rp ${AWDIR}/assets/gridplus* assets
  cp -rp ${AWDIR}/assets/icons* assets
  cp -rp ${AWDIR}/assets/iwidgets* assets
  cp -rp ${AWDIR}/assets/pdf4tcl* assets
  cp -rp ${AWDIR}/assets/tcllib* assets

CC="gcc -m32 -march=i586 -mtune=generic -DTCL_UTF_MAX=6"
CXX="g++ -m32 -march=i586 -mtune=generic -DTCL_UTF_MAX=6"
NM=nm
export STRIP AR RANLIB CC CXX RC NM

SUBDIRS="tcl libressl tcludp tdom tclvfs tclkit tls sdl2tk"
SUBDIRS="${SUBDIRS} 3dcanvas tkimg tktable tktreectrl tkpath itk v4l2 tkhtml"
SUBDIRS="${SUBDIRS} tcluvc"

ACTION="$1"
if test -z "$ACTION" ; then
  ACTION=build
fi

clean_build_stamps() {
................................................................................
  done
}

if test "$ACTION" = "init" ; then
  echo "copying sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"



    rsync -a "${AWDIR}/jni/$i" .

  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "sync" ; then
  echo "syncing sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"



    rsync -utlpr "${AWDIR}/jni/$i" .

  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "clean" -o "$ACTION" = "distclean" ; then
................................................................................
) || fail

echo -n "build libressl (static, pic) ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd libressl





  test -e build-stamp && echo >&3 "already done" && exit 0
  # aclocal/automake madness requires this
  touch configure.ac aclocal.m4 configure Makefile.am Makefile.in
  ./configure --prefix=${PFX} --build=i586-linux-gnu --with-pic \
    --disable-shared --with-openssldir=/etc/pki/tls || exit 1
  # shrink SUBDIRS
  perl -pi -e 's/^SUBDIRS.*/SUBDIRS = crypto ssl include/g' Makefile
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
................................................................................
      --with-tcl=${HERE}/tcl/unix --with-tk=${HERE}/sdl2tk/unix || exit 1
  fi
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail































echo -n "strip binaries ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  set -x
  $STRIP ${PFX_HERE}/bin/tclsh* ${PFX_HERE}/bin/wish* ${PFX_HERE}/lib/*/*.so
................................................................................
  if test -d ${PFX_HERE}/lib/v4l2* ; then
    cp -rp ${PFX_HERE}/lib/v4l2* assets
  fi
  cp -rp ${PFX_HERE}/lib/Tkhtml* assets
  if test -d ${PFX_HERE}/lib/tcluvc* ; then
    cp -rp ${PFX_HERE}/lib/tcluvc* assets
  fi

  # Tcl-only directories
  cp -rp ${AWDIR}/assets/bwidget* assets
  cp -rp ${AWDIR}/assets/gridplus* assets
  cp -rp ${AWDIR}/assets/icons* assets
  cp -rp ${AWDIR}/assets/iwidgets* assets
  cp -rp ${AWDIR}/assets/pdf4tcl* assets
  cp -rp ${AWDIR}/assets/tcllib* assets
................................................................................
  cp -rp ${PFX_HERE}/lib/tdbc* tassets
  cp -rp ${PFX_HERE}/lib/thread* tassets
  cp -rp ${PFX_HERE}/lib/udp* tassets
  cp -rp ${PFX_HERE}/lib/tdom* tassets
  cp -rp ${PFX_HERE}/lib/vfs* tassets
  cp -rp ${PFX_HERE}/lib/vqtcl* tassets
  cp -rp ${PFX_HERE}/lib/tls* tassets

  # Tcl-only directories
  cp -rp ${AWDIR}/assets/pdf4tcl* tassets
  cp -rp ${AWDIR}/assets/tcllib* tassets
  cp -rp ${AWDIR}/assets/tclsoap* tassets
  cp -rp ${AWDIR}/assets/tclws* tassets
  cp -rp ${AWDIR}/assets/upnp* tassets
  cp -rp ${AWDIR}/assets/wibble* tassets

CC="gcc -m32 -march=i586 -mtune=generic -DTCL_UTF_MAX=6"
CXX="g++ -m32 -march=i586 -mtune=generic -DTCL_UTF_MAX=6"
NM=nm
export STRIP AR RANLIB CC CXX RC NM

SUBDIRS="tcl libressl tcludp tdom tclvfs tclkit tls sdl2tk"
SUBDIRS="${SUBDIRS} 3dcanvas tkimg tktable tktreectrl tkpath itk v4l2 tkhtml"
SUBDIRS="${SUBDIRS} tcluvc dbus-tcl dbus-intf"

ACTION="$1"
if test -z "$ACTION" ; then
  ACTION=build
fi

clean_build_stamps() {
................................................................................
  done
}

if test "$ACTION" = "init" ; then
  echo "copying sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"
    if test -d "${AWDIR}/undroid/dbus/$i" ; then
      rsync -a "${AWDIR}/undroid/dbus/$i" .
    else
      rsync -a "${AWDIR}/jni/$i" .
    fi
  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "sync" ; then
  echo "syncing sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"
    if test -d "${AWDIR}/undroid/dbus/$i" ; then
      rsync -utlpr "${AWDIR}/undroid/dbus/$i" .
    else
      rsync -utlpr "${AWDIR}/jni/$i" .
    fi
  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "clean" -o "$ACTION" = "distclean" ; then
................................................................................
) || fail

echo -n "build libressl (static, pic) ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd libressl
  ASMOPT=""
  GCCVER=$($CC --version | awk '/GCC/ {print ($3+0.0)*10;}')
  if test $GCCVER -lt 44 ; then
    ASMOPT="--disable-asm"
  fi
  test -e build-stamp && echo >&3 "already done" && exit 0
  # aclocal/automake madness requires this
  touch configure.ac aclocal.m4 configure Makefile.am Makefile.in
  ./configure --prefix=${PFX} --build=i586-linux-gnu --with-pic $ASMOPT \
    --disable-shared --with-openssldir=/etc/pki/tls || exit 1
  # shrink SUBDIRS
  perl -pi -e 's/^SUBDIRS.*/SUBDIRS = crypto ssl include/g' Makefile
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
................................................................................
      --with-tcl=${HERE}/tcl/unix --with-tk=${HERE}/sdl2tk/unix || exit 1
  fi
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail

echo -n "build dbus-tcl ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd dbus-tcl
  test -e build-stamp && echo >&3 "already done" && exit 0
  PATH=${PFX_HERE}/bin:$PATH
  DESTDIR=${HERE} ./configure --build=i586-linux-gnu --prefix=${PFX} \
    --with-tcl=${HERE}/tcl/unix || exit 1
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail

echo -n "build dbus-intf ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd dbus-intf
  test -e build-stamp && echo >&3 "already done" && exit 0
  PATH=${PFX_HERE}/bin:$PATH
  DESTDIR=${HERE} ./configure --build=i586-linux-gnu --prefix=${PFX} \
    --with-tcl=${HERE}/tcl/unix || exit 1
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail

echo -n "strip binaries ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  set -x
  $STRIP ${PFX_HERE}/bin/tclsh* ${PFX_HERE}/bin/wish* ${PFX_HERE}/lib/*/*.so
................................................................................
  if test -d ${PFX_HERE}/lib/v4l2* ; then
    cp -rp ${PFX_HERE}/lib/v4l2* assets
  fi
  cp -rp ${PFX_HERE}/lib/Tkhtml* assets
  if test -d ${PFX_HERE}/lib/tcluvc* ; then
    cp -rp ${PFX_HERE}/lib/tcluvc* assets
  fi
  cp -rp ${PFX_HERE}/lib/dbus* assets
  # Tcl-only directories
  cp -rp ${AWDIR}/assets/bwidget* assets
  cp -rp ${AWDIR}/assets/gridplus* assets
  cp -rp ${AWDIR}/assets/icons* assets
  cp -rp ${AWDIR}/assets/iwidgets* assets
  cp -rp ${AWDIR}/assets/pdf4tcl* assets
  cp -rp ${AWDIR}/assets/tcllib* assets
................................................................................
  cp -rp ${PFX_HERE}/lib/tdbc* tassets
  cp -rp ${PFX_HERE}/lib/thread* tassets
  cp -rp ${PFX_HERE}/lib/udp* tassets
  cp -rp ${PFX_HERE}/lib/tdom* tassets
  cp -rp ${PFX_HERE}/lib/vfs* tassets
  cp -rp ${PFX_HERE}/lib/vqtcl* tassets
  cp -rp ${PFX_HERE}/lib/tls* tassets
  cp -rp ${PFX_HERE}/lib/dbus* tassets
  # Tcl-only directories
  cp -rp ${AWDIR}/assets/pdf4tcl* tassets
  cp -rp ${AWDIR}/assets/tcllib* tassets
  cp -rp ${AWDIR}/assets/tclsoap* tassets
  cp -rp ${AWDIR}/assets/tclws* tassets
  cp -rp ${AWDIR}/assets/upnp* tassets
  cp -rp ${AWDIR}/assets/wibble* tassets

CC="gcc -m64 -DTCL_UTF_MAX=6"
CXX="g++ -m64 -DTCL_UTF_MAX=6"
NM=nm
export STRIP AR RANLIB CC CXX RC NM

SUBDIRS="tcl libressl tcludp tdom tclvfs tclkit tls sdl2tk"
SUBDIRS="${SUBDIRS} 3dcanvas tkimg tktable tktreectrl tkpath itk v4l2 tkhtml"
SUBDIRS="${SUBDIRS} tcluvc"

ACTION="$1"
if test -z "$ACTION" ; then
  ACTION=build
fi

clean_build_stamps() {
................................................................................
  done
}

if test "$ACTION" = "init" ; then
  echo "copying sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"



    rsync -a "${AWDIR}/jni/$i" .

  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "sync" ; then
  echo "syncing sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"



    rsync -utlpr "${AWDIR}/jni/$i" .

  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "clean" -o "$ACTION" = "distclean" ; then
................................................................................
) || fail

echo -n "build libressl (static, pic) ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd libressl





  test -e build-stamp && echo >&3 "already done" && exit 0
  # aclocal/automake madness requires this
  touch configure.ac aclocal.m4 configure Makefile.am Makefile.in
  ./configure --prefix=${PFX} --build=x86_64-linux-gnu --with-pic \
    --disable-shared --with-openssldir=/etc/pki/tls || exit 1
  # shrink SUBDIRS
  perl -pi -e 's/^SUBDIRS.*/SUBDIRS = crypto ssl include/g' Makefile
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
................................................................................
      --with-tcl=${HERE}/tcl/unix --with-tk=${HERE}/sdl2tk/unix || exit 1
  fi
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail































echo -n "strip binaries ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  set -x
  $STRIP ${PFX_HERE}/bin/tclsh* ${PFX_HERE}/bin/wish* ${PFX_HERE}/lib/*/*.so
................................................................................
  if test -d ${PFX_HERE}/lib/v4l2* ; then
    cp -rp ${PFX_HERE}/lib/v4l2* assets
  fi
  cp -rp ${PFX_HERE}/lib/Tkhtml* assets
  if test -d ${PFX_HERE}/lib/tcluvc* ; then
    cp -rp ${PFX_HERE}/lib/tcluvc* assets
  fi

  # Tcl-only directories
  cp -rp ${AWDIR}/assets/bwidget* assets
  cp -rp ${AWDIR}/assets/gridplus* assets
  cp -rp ${AWDIR}/assets/icons* assets
  cp -rp ${AWDIR}/assets/iwidgets* assets
  cp -rp ${AWDIR}/assets/pdf4tcl* assets
  cp -rp ${AWDIR}/assets/tcllib* assets
................................................................................
  cp -rp ${PFX_HERE}/lib/tdbc* tassets
  cp -rp ${PFX_HERE}/lib/thread* tassets
  cp -rp ${PFX_HERE}/lib/udp* tassets
  cp -rp ${PFX_HERE}/lib/tdom* tassets
  cp -rp ${PFX_HERE}/lib/vfs* tassets
  cp -rp ${PFX_HERE}/lib/vqtcl* tassets
  cp -rp ${PFX_HERE}/lib/tls* tassets

  # Tcl-only directories
  cp -rp ${AWDIR}/assets/pdf4tcl* tassets
  cp -rp ${AWDIR}/assets/tcllib* tassets
  cp -rp ${AWDIR}/assets/tclsoap* tassets
  cp -rp ${AWDIR}/assets/tclws* tassets
  cp -rp ${AWDIR}/assets/upnp* tassets
  cp -rp ${AWDIR}/assets/wibble* tassets

CC="gcc -m64 -DTCL_UTF_MAX=6"
CXX="g++ -m64 -DTCL_UTF_MAX=6"
NM=nm
export STRIP AR RANLIB CC CXX RC NM

SUBDIRS="tcl libressl tcludp tdom tclvfs tclkit tls sdl2tk"
SUBDIRS="${SUBDIRS} 3dcanvas tkimg tktable tktreectrl tkpath itk v4l2 tkhtml"
SUBDIRS="${SUBDIRS} tcluvc dbus-tcl dbus-intf"

ACTION="$1"
if test -z "$ACTION" ; then
  ACTION=build
fi

clean_build_stamps() {
................................................................................
  done
}

if test "$ACTION" = "init" ; then
  echo "copying sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"
    if test -d "${AWDIR}/undroid/dbus/$i" ; then
      rsync -a "${AWDIR}/undroid/dbus/$i" .
    else
      rsync -a "${AWDIR}/jni/$i" .
    fi
  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "sync" ; then
  echo "syncing sources"
  for i in ${SUBDIRS} ; do
    echo "  $i"
    if test -d "${AWDIR}/undroid/dbus/$i" ; then
      rsync -utlpr "${AWDIR}/undroid/dbus/$i" .
    else
      rsync -utlpr "${AWDIR}/jni/$i" .
    fi
  done
  echo
  clean_build_stamps ${SUBDIRS}
  exit 0
fi

if test "$ACTION" = "clean" -o "$ACTION" = "distclean" ; then
................................................................................
) || fail

echo -n "build libressl (static, pic) ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd libressl
  ASMOPT=""
  GCCVER=$($CC --version | awk '/GCC/ {print ($3+0.0)*10;}')
  if test $GCCVER -lt 44 ; then
    ASMOPT="--disable-asm"
  fi
  test -e build-stamp && echo >&3 "already done" && exit 0
  # aclocal/automake madness requires this
  touch configure.ac aclocal.m4 configure Makefile.am Makefile.in
  ./configure --prefix=${PFX} --build=x86_64-linux-gnu --with-pic $ASMOPT \
    --disable-shared --with-openssldir=/etc/pki/tls || exit 1
  # shrink SUBDIRS
  perl -pi -e 's/^SUBDIRS.*/SUBDIRS = crypto ssl include/g' Makefile
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
................................................................................
      --with-tcl=${HERE}/tcl/unix --with-tk=${HERE}/sdl2tk/unix || exit 1
  fi
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail

echo -n "build dbus-tcl ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd dbus-tcl
  test -e build-stamp && echo >&3 "already done" && exit 0
  PATH=${PFX_HERE}/bin:$PATH
  DESTDIR=${HERE} ./configure --build=x86_64-linux-gnu --prefix=${PFX} \
    --with-tcl=${HERE}/tcl/unix || exit 1
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail

echo -n "build dbus-intf ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  cd dbus-intf
  test -e build-stamp && echo >&3 "already done" && exit 0
  PATH=${PFX_HERE}/bin:$PATH
  DESTDIR=${HERE} ./configure --build=x86_64-linux-gnu --prefix=${PFX} \
    --with-tcl=${HERE}/tcl/unix || exit 1
  make || exit 1
  make install DESTDIR=${HERE} || exit 1
  touch build-stamp
  echo >&3 "done"
) || fail

echo -n "strip binaries ... "
(
  exec 3>&1
  exec >> build.log 2>&1
  set -x
  $STRIP ${PFX_HERE}/bin/tclsh* ${PFX_HERE}/bin/wish* ${PFX_HERE}/lib/*/*.so
................................................................................
  if test -d ${PFX_HERE}/lib/v4l2* ; then
    cp -rp ${PFX_HERE}/lib/v4l2* assets
  fi
  cp -rp ${PFX_HERE}/lib/Tkhtml* assets
  if test -d ${PFX_HERE}/lib/tcluvc* ; then
    cp -rp ${PFX_HERE}/lib/tcluvc* assets
  fi
  cp -rp ${PFX_HERE}/lib/dbus* assets
  # Tcl-only directories
  cp -rp ${AWDIR}/assets/bwidget* assets
  cp -rp ${AWDIR}/assets/gridplus* assets
  cp -rp ${AWDIR}/assets/icons* assets
  cp -rp ${AWDIR}/assets/iwidgets* assets
  cp -rp ${AWDIR}/assets/pdf4tcl* assets
  cp -rp ${AWDIR}/assets/tcllib* assets
................................................................................
  cp -rp ${PFX_HERE}/lib/tdbc* tassets
  cp -rp ${PFX_HERE}/lib/thread* tassets
  cp -rp ${PFX_HERE}/lib/udp* tassets
  cp -rp ${PFX_HERE}/lib/tdom* tassets
  cp -rp ${PFX_HERE}/lib/vfs* tassets
  cp -rp ${PFX_HERE}/lib/vqtcl* tassets
  cp -rp ${PFX_HERE}/lib/tls* tassets
  cp -rp ${PFX_HERE}/lib/dbus* tassets
  # Tcl-only directories
  cp -rp ${AWDIR}/assets/pdf4tcl* tassets
  cp -rp ${AWDIR}/assets/tcllib* tassets
  cp -rp ${AWDIR}/assets/tclsoap* tassets
  cp -rp ${AWDIR}/assets/tclws* tassets
  cp -rp ${AWDIR}/assets/upnp* tassets
  cp -rp ${AWDIR}/assets/wibble* tassets

Version 0.1 - Jan 4 2009
	- First experimental release

Version 0.2 - Feb 14 2009
	- Adapt dbus-intf to the changed API of dbus-tcl version 0.8
	- Include all files needed for a full installable package

Version 0.3 - Dec 7 2009
	- Add the ability to invoke callbacks in named interpreters

Version 0.4 - Mar 3 2012
	- Run the body code in the namespace it was defined in

Version 1.0 - Aug 17 2013
	- Rename the package from dbus-intf to dbif, which allows it to be
	  easily turned into a Tcl module.
	- Install the package as a module instead of an old-fashioned package.
	- Global variable of a property is in the interp specified for body.
	- No more magic variables in a property script. The local variable has
	  the same name as the property.
	- Check if the value provided for a property matches the signature.
	- New "delete" subcommand to delete a node subtree.
	- Let dbif default return the current defaults.
	- If no defaults have been set up, set the default bus to the bus used
	  when connecting.
	- The introspect method now lists the GetAll method for properties.

Version 1.1 - Sep 6 2014
	- Add -id option to the signal subcommand to allow user specified
	  SignalID's.

Version 1.2 - Jun 18 2015
	- Implement the org.freedesktop.DBus.Properties.PropertiesChanged
	  signal.
	- Allow use of busses other than session and system.
	- Add -attributes option to specify annotations.
	- Adopt the [return -async 1] idom from dbus 2.1.
	- Provide a way to add/replace methods and signals for standard
	  interfaces.
	- Completely clean up the old signal when reusing a signalID.
	- Clean up (array) variables when they are no longer needed.
	- Fix introspection when no objects have been defined.
	- Correctly handle signals without a handler.

Installation Instructions
*************************

Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
2006, 2007, 2008, 2009 Free Software Foundation, Inc.

This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.

Basic Installation
==================

Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package.  The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package.

   The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation.  It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions.  Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').

   It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring.  Caching is
disabled by default to prevent problems with accidental use of stale
cache files.

   If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release.  If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.

   The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'.  You need `configure.ac' if
you want to change it or regenerate `configure' using a newer version
of `autoconf'.

The simplest way to compile this package is:

  1. `cd' to the directory containing the package's source code and type
     `./configure' to configure the package for your system.

     Running `configure' might take a while.  While running, it prints
     some messages telling which features it is checking for.

  2. Type `make' to compile the package.

  3. Optionally, type `make check' to run any self-tests that come with
     the package.

  4. Type `make install' to install the programs and any data files and
     documentation.

  5. You can remove the program binaries and object files from the
     source code directory by typing `make clean'.  To also remove the
     files that `configure' created (so you can compile the package for
     a different kind of computer), type `make distclean'.  There is
     also a `make maintainer-clean' target, but that is intended mainly
     for the package's developers.  If you use it, you may have to get
     all sorts of other programs in order to regenerate files that came
     with the distribution.

  6. Often, you can also type `make uninstall' to remove the installed
     files again.

Compilers and Options
=====================

Some systems require unusual options for compilation or linking that the
`configure' script does not know about.  Run `./configure --help' for
details on some of the pertinent environment variables.

   You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment.  Here
is an example:

     ./configure CC=c99 CFLAGS=-g LIBS=-lposix

   *Note Defining Variables::, for more details.

Compiling For Multiple Architectures
====================================

You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory.  To do this, you can use GNU `make'.  `cd' to the
directory where you want the object files and executables to go and run
the `configure' script.  `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.

   With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory.  After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.

Installation Names
==================

By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc.  You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.

   You can specify separate installation prefixes for
architecture-specific files and architecture-independent files.  If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.

   In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files.  Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.

   If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.

Optional Features
=================

Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System).  The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.

   For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.

Specifying the System Type
==========================

There may be some features `configure' cannot figure out automatically,
but needs to determine by the type of machine the package will run on.
Usually, assuming the package is built to be run on the _same_
architectures, `configure' can figure that out, but if it prints a
message saying it cannot guess the machine type, give it the
`--build=TYPE' option.  TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:

     CPU-COMPANY-SYSTEM

where SYSTEM can have one of these forms:

     OS KERNEL-OS

   See the file `config.sub' for the possible values of each field.  If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.

   If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.

   If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.

Sharing Defaults
================

If you want to set default values for `configure' scripts to share, you
can create a site shell script called `config.site' that gives default
values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists.  Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.

Defining Variables
==================

Variables not defined in a site shell script can be set in the
environment passed to `configure'.  However, some packages may run
configure again during the build, and the customized values of these
variables may be lost.  In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'.  For example:

     ./configure CC=/usr/local2/bin/gcc

causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).

Unfortunately, this technique does not work for `CONFIG_SHELL' due to
an Autoconf bug.  Until the bug is fixed you can use this workaround:

     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash

`configure' Invocation
======================

`configure' recognizes the following options to control how it operates.

`--help'
`-h'
     Print a summary of the options to `configure', and exit.

`--version'
`-V'
     Print the version of Autoconf used to generate the `configure'
     script, and exit.

`--cache-file=FILE'
     Enable the cache: use and save the results of the tests in FILE,
     traditionally `config.cache'.  FILE defaults to `/dev/null' to
     disable caching.

`--config-cache'
`-C'
     Alias for `--cache-file=config.cache'.

`--quiet'
`--silent'
`-q'
     Do not print messages saying which checks are being made.  To
     suppress all normal output, redirect it to `/dev/null' (any error
     messages will still be shown).

`--srcdir=DIR'
     Look for the package's source code in directory DIR.  Usually
     `configure' can determine that directory automatically.

`configure' also accepts some other, not widely useful, options.  Run
`configure --help' for more details.

# Makefile.in --
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: Makefile.in,v 1.6 2015/08/01 15:37:10 sbron Exp $

PKG_TCL_SOURCES	= @PKG_TCL_SOURCES@

SHELL		= @SHELL@

srcdir		= @srcdir@
prefix		= @prefix@
exec_prefix	= @exec_prefix@

libdir		= @libdir@
datarootdir	= @datarootdir@
mandir		= @mandir@
docdir		= @docdir@
htmldir		= @htmldir@
moduledir	= @moduledir@

PKG_DIR		= $(PACKAGE_NAME)-$(PACKAGE_VERSION)
pkglibdir       = $(libdir)/$(PACKAGE_NAME)

INSTALL		= @INSTALL@
INSTALL_PROGRAM	= @INSTALL_PROGRAM@
INSTALL_DATA	= @INSTALL_DATA@
INSTALL_SCRIPT	= @INSTALL_SCRIPT@

PACKAGE_NAME	= @PACKAGE_NAME@
PACKAGE_TARNAME	= @PACKAGE_TARNAME@
PACKAGE_VERSION	= @PACKAGE_VERSION@

TCLSH_PROG      = @TCLSH_PROG@
TCLSH           = $(PKG_ENV) $(TCLSH_ENV) $(TCLSH_PROG)

DTPLITE_PROG    = @DTPLITE_PROG@
DTPLITE         = $(DTPLITE_PROG)

MODULE_NAME	= dbif-$(PACKAGE_VERSION).tm

all: module doc

module: $(MODULE_NAME)

doc: doc/dbif.html doc/dbif.n

$(MODULE_NAME): $(PKG_TCL_SOURCES)
 	# Gmake will ignore $> and BSD make will ignore $+
	cp $+ $> $@

doc/dbif.n: $(srcdir)/doc/dbif.man
 	# Gmake will ignore $> and BSD make will ignore $+.
	$(DTPLITE) -o $@ nroff $+ $>

doc/dbif.html: $(srcdir)/doc/dbif.man
 	# Gmake will ignore $> and BSD make will ignore $+.
	$(DTPLITE) -o $@ html $+ $>

VPATH = $(srcdir)

COMPRESS	= tar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
DIST_ROOT	= /tmp/dist
DIST_DIR	= $(DIST_ROOT)/$(PKG_DIR)

dist-clean:
	rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*

dist: dist-clean
	mkdir -p $(DIST_DIR)
	cp -p $(srcdir)/ChangeLog $(srcdir)/INSTALL* $(srcdir)/README* \
		$(srcdir)/license* $(srcdir)/dbif.m4 $(srcdir)/aclocal.m4 \
		$(srcdir)/configure $(srcdir)/*.in $(DIST_DIR)/
	chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4
	chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in

	for i in $(srcdir)/*.tcl; do \
	    if [ -f $$i ]; then \
		cp -p $$i $(DIST_DIR)/ ; \
	    fi; \
	done;

	mkdir $(DIST_DIR)/tclconfig
	cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \
		$(DIST_DIR)/tclconfig/
	chmod 664 $(DIST_DIR)/tclconfig/tcl.m4
	chmod +x $(DIST_DIR)/tclconfig/install-sh

	list='demos examples doc generic library mac tests unix win'; \
	for p in $$list; do \
	    if test -d $(srcdir)/$$p ; then \
		mkdir $(DIST_DIR)/$$p; \
		cp -p $(srcdir)/$$p/*.* $(DIST_DIR)/$$p/; \
	    fi; \
	done

	(cd $(DIST_ROOT); $(COMPRESS);)

clean:
	-test -z "$(BINARIES)" || rm -f $(BINARIES)
	-rm -f *.$(OBJEXT) core *.core
	-rm -f doc/dbif.html doc/dbif.n
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean: clean
	-rm -f *.tab.c
	-rm -f $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log config.status

install: all install-module @INSTALLDOC@

install-module: module
	@mkdir -p $(DESTDIR)$(moduledir)
	@echo " Install $(MODULE_NAME) $(DESTDIR)$(moduledir)"; \
	$(INSTALL_DATA) $(MODULE_NAME) $(DESTDIR)$(moduledir); \

install-libraries:
	@mkdir -p $(DESTDIR)$(pkglibdir)
	@list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
	  if test -f $(srcdir)/$$p; then \
	    destp=`basename $$p`; \
	    echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \
	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \
	  fi; \
	done
	@echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
	$(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \

install-doc: doc
	@mkdir -p $(DESTDIR)$(mandir)/mann
	@echo "Installing documentation in $(DESTDIR)$(mandir)"
	@-list='doc/*.n'; for i in $$list; do \
	    echo "Installing $$i"; \
	    rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \
	    $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \
	done
	@mkdir -p $(DESTDIR)$(htmldir)
	@echo "Installing documentation in $(DESTDIR)$(htmldir)"
	@-list='doc/*.html $(srcdir)/license*'; for i in $$list; do \
	    echo "Installing $$i"; \
	    rm -f $(DESTDIR)$(htmldir)/`basename $$i`; \
	    $(INSTALL_DATA) $$i $(DESTDIR)$(htmldir) ; \
	done

.PHONY: doc

$Id: README,v 1.2 2009/03/01 14:30:18 sbron Exp $


About
-----

DBus-Intf is a Tcl library for easily providing an introspectable DBus
interface to Tcl programs. It supports the following standard DBus interface
specifications: org.freedesktop.DBus.Peer, org.freedesktop.DBus.Properties,
and org.freedesktop.DBus.Introspectable


Features
--------

   + Provide introspection of methods, signals, and properties.

   + Support org.freedesktop.DBus.Properties.Get, Set, and GetAll calls.

   + Respond to org.freedesktop.DBus.Peer.Ping requests.


Compiling
---------

The dbus-intf package is plain Tcl. A TEA3-based build system is provided for
building the manual page and installing the package. Installing the package
generally consists of running "./configure; make; make install" in the
top-level directory. More details are available in the INSTALL file.

*** NOTE ***

Building the documentation requires the availability of the dtplite command,
which is part of the doctools package in tcllib.


Availability
------------
The DBus interface package is hosted under the dbus-tcl project at
SourceForge:
	http://dbus-tcl.sourceforge.net/
	http://sourceforge.net/projects/dbus-tcl

The latest sources are available under the 'dbus-intf' module in CVS.

#
# Include the TEA standard macro set
#

builtin(include,tclconfig/tcl.m4)

#
# Add here whatever m4 macros you want to define for your package
#
builtin(include,dbif.m4)

#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.69 for dbif 1.2.
#
#
# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
#
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##

# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
  emulate sh
  NULLCMD=:
  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in #(
  *posix*) :
    set -o posix ;; #(
  *) :
     ;;
esac
fi


as_nl='
'
export as_nl
# Printing a long string crashes Solaris 7 /usr/bin/printf.
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
# Prefer a ksh shell builtin over an external printf program on Solaris,
# but without wasting forks for bash or zsh.
if test -z "$BASH_VERSION$ZSH_VERSION" \
    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
  as_echo='print -r --'
  as_echo_n='print -rn --'
elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
  as_echo='printf %s\n'
  as_echo_n='printf %s'
else
  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
    as_echo_n='/usr/ucb/echo -n'
  else
    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
    as_echo_n_body='eval
      arg=$1;
      case $arg in #(
      *"$as_nl"*)
	expr "X$arg" : "X\\(.*\\)$as_nl";
	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
      esac;
      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
    '
    export as_echo_n_body
    as_echo_n='sh -c $as_echo_n_body as_echo'
  fi
  export as_echo_body
  as_echo='sh -c $as_echo_body as_echo'
fi

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  PATH_SEPARATOR=:
  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
      PATH_SEPARATOR=';'
  }
fi


# IFS
# We need space, tab and new line, in precisely that order.  Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
IFS=" ""	$as_nl"

# Find who we are.  Look in the path if we contain no directory separator.
as_myself=
case $0 in #((
  *[\\/]* ) as_myself=$0 ;;
  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
  done
IFS=$as_save_IFS

     ;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
  as_myself=$0
fi
if test ! -f "$as_myself"; then
  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
  exit 1
fi

# Unset variables that we do not need and which cause bugs (e.g. in
# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
# suppresses any "Segmentation fault" message there.  '((' could
# trigger a bug in pdksh 5.2.14.
for as_var in BASH_ENV ENV MAIL MAILPATH
do eval test x\${$as_var+set} = xset \
  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
PS4='+ '

# NLS nuisances.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE

# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

# Use a proper internal environment variable to ensure we don't fall
  # into an infinite loop, continuously re-executing ourselves.
  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
    _as_can_reexec=no; export _as_can_reexec;
    # We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
  *v*x* | *x*v* ) as_opts=-vx ;;
  *v* ) as_opts=-v ;;
  *x* ) as_opts=-x ;;
  * ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
as_fn_exit 255
  fi
  # We don't want this to propagate to other subprocesses.
          { _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
  emulate sh
  NULLCMD=:
  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '\${1+\"\$@\"}'='\"\$@\"'
  setopt NO_GLOB_SUBST
else
  case \`(set -o) 2>/dev/null\` in #(
  *posix*) :
    set -o posix ;; #(
  *) :
     ;;
esac
fi
"
  as_required="as_fn_return () { (exit \$1); }
as_fn_success () { as_fn_return 0; }
as_fn_failure () { as_fn_return 1; }
as_fn_ret_success () { return 0; }
as_fn_ret_failure () { return 1; }

exitcode=0
as_fn_success || { exitcode=1; echo as_fn_success failed.; }
as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :

else
  exitcode=1; echo positional parameters were not saved.
fi
test x\$exitcode = x0 || exit 1
test -x / || exit 1"
  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
  if (eval "$as_required") 2>/dev/null; then :
  as_have_required=yes
else
  as_have_required=no
fi
  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :

else
  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
as_found=false
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  as_found=:
  case $as_dir in #(
	 /*)
	   for as_base in sh bash ksh sh5; do
	     # Try only shells that exist, to save several forks.
	     as_shell=$as_dir/$as_base
	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
  CONFIG_SHELL=$as_shell as_have_required=yes
		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
  break 2
fi
fi
	   done;;
       esac
  as_found=false
done
$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
  CONFIG_SHELL=$SHELL as_have_required=yes
fi; }
IFS=$as_save_IFS


      if test "x$CONFIG_SHELL" != x; then :
  export CONFIG_SHELL
             # We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
  *v*x* | *x*v* ) as_opts=-vx ;;
  *v* ) as_opts=-v ;;
  *x* ) as_opts=-x ;;
  * ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
exit 255
fi

    if test x$as_have_required = xno; then :
  $as_echo "$0: This script requires a shell more modern than all"
  $as_echo "$0: the shells that I found on your system."
  if test x${ZSH_VERSION+set} = xset ; then
    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
  else
    $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
$0: including any error possibly output before this
$0: message. Then install a modern shell, or manually run
$0: the script under such a shell if you do have one."
  fi
  exit 1
fi
fi
fi
SHELL=${CONFIG_SHELL-/bin/sh}
export SHELL
# Unset more variables known to interfere with behavior of common tools.
CLICOLOR_FORCE= GREP_OPTIONS=
unset CLICOLOR_FORCE GREP_OPTIONS

## --------------------- ##
## M4sh Shell Functions. ##
## --------------------- ##
# as_fn_unset VAR
# ---------------
# Portably unset VAR.
as_fn_unset ()
{
  { eval $1=; unset $1;}
}
as_unset=as_fn_unset

# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.
as_fn_set_status ()
{
  return $1
} # as_fn_set_status

# as_fn_exit STATUS
# -----------------
# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
as_fn_exit ()
{
  set +e
  as_fn_set_status $1
  exit $1
} # as_fn_exit

# as_fn_mkdir_p
# -------------
# Create "$as_dir" as a directory, including parents if necessary.
as_fn_mkdir_p ()
{

  case $as_dir in #(
  -*) as_dir=./$as_dir;;
  esac
  test -d "$as_dir" || eval $as_mkdir_p || {
    as_dirs=
    while :; do
      case $as_dir in #(
      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
      *) as_qdir=$as_dir;;
      esac
      as_dirs="'$as_qdir' $as_dirs"
      as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
      test -d "$as_dir" && break
    done
    test -z "$as_dirs" || eval "mkdir $as_dirs"
  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"


} # as_fn_mkdir_p

# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
  test -f "$1" && test -x "$1"
} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over
# repeated appends, instead of the typical quadratic growth present in naive
# implementations.
if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
  eval 'as_fn_append ()
  {
    eval $1+=\$2
  }'
else
  as_fn_append ()
  {
    eval $1=\$$1\$2
  }
fi # as_fn_append

# as_fn_arith ARG...
# ------------------
# Perform arithmetic evaluation on the ARGs, and store the result in the
# global $as_val. Take advantage of shells that can avoid forks. The arguments
# must be portable across $(()) and expr.
if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
  eval 'as_fn_arith ()
  {
    as_val=$(( $* ))
  }'
else
  as_fn_arith ()
  {
    as_val=`expr "$@" || test $? -eq 1`
  }
fi # as_fn_arith


# as_fn_error STATUS ERROR [LINENO LOG_FD]
# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
  as_status=$1; test $as_status -eq 0 && as_status=1
  if test "$4"; then
    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
  fi
  $as_echo "$as_me: error: $2" >&2
  as_fn_exit $as_status
} # as_fn_error

if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
  as_basename=basename
else
  as_basename=false
fi

if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
  as_dirname=dirname
else
  as_dirname=false
fi

as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
	 X"$0" : 'X\(//\)$' \| \
	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`

# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits


  as_lineno_1=$LINENO as_lineno_1a=$LINENO
  as_lineno_2=$LINENO as_lineno_2a=$LINENO
  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
  sed -n '
    p
    /[$]LINENO/=
  ' <$as_myself |
    sed '
      s/[$]LINENO.*/&-/
      t lineno
      b
      :lineno
      N
      :loop
      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
      t loop
      s/-\n.*//
    ' >$as_me.lineno &&
  chmod +x "$as_me.lineno" ||
    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }

  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
  # already done that, so ensure we don't try to do so again and fall
  # in an infinite loop.  This has already happened in practice.
  _as_can_reexec=no; export _as_can_reexec
  # Don't try to exec as it changes $[0], causing all sort of problems
  # (the dirname of $[0] is not the place where we might find the
  # original and so on.  Autoconf is especially sensitive to this).
  . "./$as_me.lineno"
  # Exit status is that of the last command.
  exit
}

ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in #(((((
-n*)
  case `echo 'xy\c'` in
  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
  xy)  ECHO_C='\c';;
  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
       ECHO_T='	';;
  esac;;
*)
  ECHO_N='-n';;
esac

rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
  rm -f conf$$.dir/conf$$.file
else
  rm -f conf$$.dir
  mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
  if ln -s conf$$.file conf$$ 2>/dev/null; then
    as_ln_s='ln -s'
    # ... but there are two gotchas:
    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
    # In both cases, we have to default to `cp -pR'.
    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
      as_ln_s='cp -pR'
  elif ln conf$$.file conf$$ 2>/dev/null; then
    as_ln_s=ln
  else
    as_ln_s='cp -pR'
  fi
else
  as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null

if mkdir -p . 2>/dev/null; then
  as_mkdir_p='mkdir -p "$as_dir"'
else
  test -d ./-p && rmdir ./-p
  as_mkdir_p=false
fi

as_test_x='test -x'
as_executable_p=as_fn_executable_p

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"


test -n "$DJDIR" || exec 7<&0 </dev/null
exec 6>&1

# Name of the host.
# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`

#
# Initializations.
#
ac_default_prefix=/usr/local
ac_clean_files=
ac_config_libobj_dir=.
LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=

# Identity of this package.
PACKAGE_NAME='dbif'
PACKAGE_TARNAME='dbif'
PACKAGE_VERSION='1.2'
PACKAGE_STRING='dbif 1.2'
PACKAGE_BUGREPORT=''
PACKAGE_URL=''

ac_subst_vars='LTLIBOBJS
LIBOBJS
INSTALLDOC
DTPLITE_PROG
TCLSH_PROG
PKG_OBJECTS
PKG_SOURCES
INSTALL_DATA
INSTALL_SCRIPT
INSTALL_PROGRAM
moduledir
TCL_SHLIB_LD_LIBS
TCL_LD_FLAGS
TCL_EXTRA_CFLAGS
TCL_DEFS
TCL_LIBS
CLEANFILES
OBJEXT
ac_ct_CC
CPPFLAGS
LDFLAGS
CFLAGS
CC
TCL_STUB_LIB_SPEC
TCL_STUB_LIB_FLAG
TCL_STUB_LIB_FILE
TCL_LIB_SPEC
TCL_LIB_FLAG
TCL_LIB_FILE
TCL_SRC_DIR
TCL_BIN_DIR
TCL_PATCH_LEVEL
TCL_VERSION
PKG_CFLAGS
PKG_LIBS
PKG_INCLUDES
PKG_HEADERS
PKG_TCL_SOURCES
PKG_STUB_OBJECTS
PKG_STUB_SOURCES
PKG_STUB_LIB_FILE
PKG_LIB_FILE
EXEEXT
CYGPATH
target_alias
host_alias
build_alias
LIBS
ECHO_T
ECHO_N
ECHO_C
DEFS
mandir
localedir
libdir
psdir
pdfdir
dvidir
htmldir
infodir
docdir
oldincludedir
includedir
localstatedir
sharedstatedir
sysconfdir
datadir
datarootdir
libexecdir
sbindir
bindir
program_transform_name
prefix
exec_prefix
PACKAGE_URL
PACKAGE_BUGREPORT
PACKAGE_STRING
PACKAGE_VERSION
PACKAGE_TARNAME
PACKAGE_NAME
PATH_SEPARATOR
SHELL'
ac_subst_files=''
ac_user_opts='
enable_option_checking
with_tcl
'
      ac_precious_vars='build_alias
host_alias
target_alias
CC
CFLAGS
LDFLAGS
LIBS
CPPFLAGS
moduledir'


# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
ac_unrecognized_opts=
ac_unrecognized_sep=
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
exec_prefix=NONE
no_create=
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
verbose=
x_includes=NONE
x_libraries=NONE

# Installation directory options.
# These are left unexpanded so users can "make install exec_prefix=/foo"
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
# (The list follows the same order as the GNU Coding Standards.)
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datarootdir='${prefix}/share'
datadir='${datarootdir}'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
includedir='${prefix}/include'
oldincludedir='/usr/include'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
infodir='${datarootdir}/info'
htmldir='${docdir}'
dvidir='${docdir}'
pdfdir='${docdir}'
psdir='${docdir}'
libdir='${exec_prefix}/lib'
localedir='${datarootdir}/locale'
mandir='${datarootdir}/man'

ac_prev=
ac_dashdash=
for ac_option
do
  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval $ac_prev=\$ac_option
    ac_prev=
    continue
  fi

  case $ac_option in
  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
  *=)   ac_optarg= ;;
  *)    ac_optarg=yes ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case $ac_dashdash$ac_option in
  --)
    ac_dashdash=yes ;;

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir=$ac_optarg ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build_alias ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build_alias=$ac_optarg ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file=$ac_optarg ;;

  --config-cache | -C)
    cache_file=config.cache ;;

  -datadir | --datadir | --datadi | --datad)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=*)
    datadir=$ac_optarg ;;

  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
  | --dataroo | --dataro | --datar)
    ac_prev=datarootdir ;;
  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
    datarootdir=$ac_optarg ;;

  -disable-* | --disable-*)
    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
      as_fn_error $? "invalid feature name: $ac_useropt"
    ac_useropt_orig=$ac_useropt
    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
    case $ac_user_opts in
      *"
"enable_$ac_useropt"
"*) ;;
      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
	 ac_unrecognized_sep=', ';;
    esac
    eval enable_$ac_useropt=no ;;

  -docdir | --docdir | --docdi | --doc | --do)
    ac_prev=docdir ;;
  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
    docdir=$ac_optarg ;;

  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
    ac_prev=dvidir ;;
  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
    dvidir=$ac_optarg ;;

  -enable-* | --enable-*)
    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
      as_fn_error $? "invalid feature name: $ac_useropt"
    ac_useropt_orig=$ac_useropt
    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
    case $ac_user_opts in
      *"
"enable_$ac_useropt"
"*) ;;
      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
	 ac_unrecognized_sep=', ';;
    esac
    eval enable_$ac_useropt=\$ac_optarg ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix=$ac_optarg ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he | -h)
    ac_init_help=long ;;
  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
    ac_init_help=recursive ;;
  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
    ac_init_help=short ;;

  -host | --host | --hos | --ho)
    ac_prev=host_alias ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host_alias=$ac_optarg ;;

  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
    ac_prev=htmldir ;;
  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
  | --ht=*)
    htmldir=$ac_optarg ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir=$ac_optarg ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir=$ac_optarg ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir=$ac_optarg ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir=$ac_optarg ;;

  -localedir | --localedir | --localedi | --localed | --locale)
    ac_prev=localedir ;;
  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
    localedir=$ac_optarg ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst | --locals)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
    localstatedir=$ac_optarg ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir=$ac_optarg ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c | -n)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir=$ac_optarg ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix=$ac_optarg ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix=$ac_optarg ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix=$ac_optarg ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name=$ac_optarg ;;

  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
    ac_prev=pdfdir ;;
  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
    pdfdir=$ac_optarg ;;

  -psdir | --psdir | --psdi | --psd | --ps)
    ac_prev=psdir ;;
  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
    psdir=$ac_optarg ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir=$ac_optarg ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir=$ac_optarg ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site=$ac_optarg ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir=$ac_optarg ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir=$ac_optarg ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target_alias ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target_alias=$ac_optarg ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers | -V)
    ac_init_version=: ;;

  -with-* | --with-*)
    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
      as_fn_error $? "invalid package name: $ac_useropt"
    ac_useropt_orig=$ac_useropt
    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
    case $ac_user_opts in
      *"
"with_$ac_useropt"
"*) ;;
      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
	 ac_unrecognized_sep=', ';;
    esac
    eval with_$ac_useropt=\$ac_optarg ;;

  -without-* | --without-*)
    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
      as_fn_error $? "invalid package name: $ac_useropt"
    ac_useropt_orig=$ac_useropt
    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
    case $ac_user_opts in
      *"
"with_$ac_useropt"
"*) ;;
      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
	 ac_unrecognized_sep=', ';;
    esac
    eval with_$ac_useropt=no ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes=$ac_optarg ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries=$ac_optarg ;;

  -*) as_fn_error $? "unrecognized option: \`$ac_option'
Try \`$0 --help' for more information"
    ;;

  *=*)
    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
    # Reject names that are not valid shell variable names.
    case $ac_envvar in #(
      '' | [0-9]* | *[!_$as_cr_alnum]* )
      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
    esac
    eval $ac_envvar=\$ac_optarg
    export $ac_envvar ;;

  *)
    # FIXME: should be removed in autoconf 3.0.
    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
    ;;

  esac
done

if test -n "$ac_prev"; then
  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
  as_fn_error $? "missing argument to $ac_option"
fi

if test -n "$ac_unrecognized_opts"; then
  case $enable_option_checking in
    no) ;;
    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
  esac
fi

# Check all directory arguments for consistency.
for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
		datadir sysconfdir sharedstatedir localstatedir includedir \
		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
		libdir localedir mandir
do
  eval ac_val=\$$ac_var
  # Remove trailing slashes.
  case $ac_val in
    */ )
      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
      eval $ac_var=\$ac_val;;
  esac
  # Be sure to have absolute directory names.
  case $ac_val in
    [\\/$]* | ?:[\\/]* )  continue;;
    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
  esac
  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
done

# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
# FIXME: To remove some day.
build=$build_alias
host=$host_alias
target=$target_alias

# FIXME: To remove some day.
if test "x$host_alias" != x; then
  if test "x$build_alias" = x; then
    cross_compiling=maybe
  elif test "x$build_alias" != "x$host_alias"; then
    cross_compiling=yes
  fi
fi

ac_tool_prefix=
test -n "$host_alias" && ac_tool_prefix=$host_alias-

test "$silent" = yes && exec 6>/dev/null


ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
  as_fn_error $? "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
  as_fn_error $? "pwd does not report name of working directory"


# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then the parent directory.
  ac_confdir=`$as_dirname -- "$as_myself" ||
$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_myself" : 'X\(//\)[^/]' \| \
	 X"$as_myself" : 'X\(//\)$' \| \
	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_myself" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
  srcdir=$ac_confdir
  if test ! -r "$srcdir/$ac_unique_file"; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r "$srcdir/$ac_unique_file"; then
  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
	pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
  srcdir=.
fi
# Remove unnecessary trailing slashes from srcdir.
# Double slashes in file names in object file debugging info
# mess up M-x gdb in Emacs.
case $srcdir in
*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
esac
for ac_var in $ac_precious_vars; do
  eval ac_env_${ac_var}_set=\${${ac_var}+set}
  eval ac_env_${ac_var}_value=\$${ac_var}
  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
  eval ac_cv_env_${ac_var}_value=\$${ac_var}
done

#
# Report the --help message.
#
if test "$ac_init_help" = "long"; then
  # Omit some internal or obsolete options to make the list less imposing.
  # This message is too long to be a string in the A/UX 3.1 sh.
  cat <<_ACEOF
\`configure' configures dbif 1.2 to adapt to many kinds of systems.

Usage: $0 [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print \`checking ...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for \`--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or \`..']

Installation directories:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [PREFIX]

By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
an installation prefix other than \`$ac_default_prefix' using \`--prefix',
for instance \`--prefix=\$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:
  --bindir=DIR            user executables [EPREFIX/bin]
  --sbindir=DIR           system admin executables [EPREFIX/sbin]
  --libexecdir=DIR        program executables [EPREFIX/libexec]
  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
  --libdir=DIR            object code libraries [EPREFIX/lib]
  --includedir=DIR        C header files [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
  --infodir=DIR           info documentation [DATAROOTDIR/info]
  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
  --mandir=DIR            man documentation [DATAROOTDIR/man]
  --docdir=DIR            documentation root [DATAROOTDIR/doc/dbif]
  --htmldir=DIR           html documentation [DOCDIR]
  --dvidir=DIR            dvi documentation [DOCDIR]
  --pdfdir=DIR            pdf documentation [DOCDIR]
  --psdir=DIR             ps documentation [DOCDIR]
_ACEOF

  cat <<\_ACEOF
_ACEOF
fi

if test -n "$ac_init_help"; then
  case $ac_init_help in
     short | recursive ) echo "Configuration of dbif 1.2:";;
   esac
  cat <<\_ACEOF

Optional Packages:
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-tcl              directory containing tcl configuration
                          (tclConfig.sh)

Some influential environment variables:
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  LIBS        libraries to pass to the linker, e.g. -l<library>
  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
              you have headers in a nonstandard directory <include dir>
  moduledir   directory in which to install Tcl modules

Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.

Report bugs to the package provider.
_ACEOF
ac_status=$?
fi

if test "$ac_init_help" = "recursive"; then
  # If there are subdirs, report their specific --help.
  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
    test -d "$ac_dir" ||
      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
      continue
    ac_builddir=.

case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
  # A ".." for each directory in $ac_dir_suffix.
  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
  case $ac_top_builddir_sub in
  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
  esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix

case $srcdir in
  .)  # We are building in place.
    ac_srcdir=.
    ac_top_srcdir=$ac_top_builddir_sub
    ac_abs_top_srcdir=$ac_pwd ;;
  [\\/]* | ?:[\\/]* )  # Absolute name.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir
    ac_abs_top_srcdir=$srcdir ;;
  *) # Relative name.
    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_build_prefix$srcdir
    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix

    cd "$ac_dir" || { ac_status=$?; continue; }
    # Check for guested configure.
    if test -f "$ac_srcdir/configure.gnu"; then
      echo &&
      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
    elif test -f "$ac_srcdir/configure"; then
      echo &&
      $SHELL "$ac_srcdir/configure" --help=recursive
    else
      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
    fi || ac_status=$?
    cd "$ac_pwd" || { ac_status=$?; break; }
  done
fi

test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
  cat <<\_ACEOF
dbif configure 1.2
generated by GNU Autoconf 2.69

Copyright (C) 2012 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
  exit
fi

## ------------------------ ##
## Autoconf initialization. ##
## ------------------------ ##

# ac_fn_c_try_compile LINENO
# --------------------------
# Try to compile conftest.$ac_ext, and return whether this succeeded.
ac_fn_c_try_compile ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  rm -f conftest.$ac_objext
  if { { ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_compile") 2>conftest.err
  ac_status=$?
  if test -s conftest.err; then
    grep -v '^ *+' conftest.err >conftest.er1
    cat conftest.er1 >&5
    mv -f conftest.er1 conftest.err
  fi
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then :
  ac_retval=0
else
  $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_retval=1
fi
  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
  as_fn_set_status $ac_retval

} # ac_fn_c_try_compile
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by dbif $as_me 1.2, which was
generated by GNU Autoconf 2.69.  Invocation command line was

  $ $0 $@

_ACEOF
exec 5>>config.log
{
cat <<_ASUNAME
## --------- ##
## Platform. ##
## --------- ##

hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`

/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`

/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`

_ASUNAME

as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    $as_echo "PATH: $as_dir"
  done
IFS=$as_save_IFS

} >&5

cat >&5 <<_ACEOF


## ----------- ##
## Core tests. ##
## ----------- ##

_ACEOF


# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
# Strip out --silent because we don't want to record it for future runs.
# Also quote any args containing shell meta-characters.
# Make two passes to allow for proper duplicate-argument suppression.
ac_configure_args=
ac_configure_args0=
ac_configure_args1=
ac_must_keep_next=false
for ac_pass in 1 2
do
  for ac_arg
  do
    case $ac_arg in
    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
    | -silent | --silent | --silen | --sile | --sil)
      continue ;;
    *\'*)
      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
    esac
    case $ac_pass in
    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
    2)
      as_fn_append ac_configure_args1 " '$ac_arg'"
      if test $ac_must_keep_next = true; then
	ac_must_keep_next=false # Got value, back to normal.
      else
	case $ac_arg in
	  *=* | --config-cache | -C | -disable-* | --disable-* \
	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
	  | -with-* | --with-* | -without-* | --without-* | --x)
	    case "$ac_configure_args0 " in
	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
	    esac
	    ;;
	  -* ) ac_must_keep_next=true ;;
	esac
      fi
      as_fn_append ac_configure_args " '$ac_arg'"
      ;;
    esac
  done
done
{ ac_configure_args0=; unset ac_configure_args0;}
{ ac_configure_args1=; unset ac_configure_args1;}

# When interrupted or exit'd, cleanup temporary files, and complete
# config.log.  We remove comments because anyway the quotes in there
# would cause problems or look ugly.
# WARNING: Use '\'' to represent an apostrophe within the trap.
# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
trap 'exit_status=$?
  # Save into config.log some information that might help in debugging.
  {
    echo

    $as_echo "## ---------------- ##
## Cache variables. ##
## ---------------- ##"
    echo
    # The following way of writing the cache mishandles newlines in values,
(
  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
    eval ac_val=\$$ac_var
    case $ac_val in #(
    *${as_nl}*)
      case $ac_var in #(
      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
      esac
      case $ac_var in #(
      _ | IFS | as_nl) ;; #(
      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
      *) { eval $ac_var=; unset $ac_var;} ;;
      esac ;;
    esac
  done
  (set) 2>&1 |
    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
    *${as_nl}ac_space=\ *)
      sed -n \
	"s/'\''/'\''\\\\'\'''\''/g;
	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
      ;; #(
    *)
      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
      ;;
    esac |
    sort
)
    echo

    $as_echo "## ----------------- ##
## Output variables. ##
## ----------------- ##"
    echo
    for ac_var in $ac_subst_vars
    do
      eval ac_val=\$$ac_var
      case $ac_val in
      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
      esac
      $as_echo "$ac_var='\''$ac_val'\''"
    done | sort
    echo

    if test -n "$ac_subst_files"; then
      $as_echo "## ------------------- ##
## File substitutions. ##
## ------------------- ##"
      echo
      for ac_var in $ac_subst_files
      do
	eval ac_val=\$$ac_var
	case $ac_val in
	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
	esac
	$as_echo "$ac_var='\''$ac_val'\''"
      done | sort
      echo
    fi

    if test -s confdefs.h; then
      $as_echo "## ----------- ##
## confdefs.h. ##
## ----------- ##"
      echo
      cat confdefs.h
      echo
    fi
    test "$ac_signal" != 0 &&
      $as_echo "$as_me: caught signal $ac_signal"
    $as_echo "$as_me: exit $exit_status"
  } >&5
  rm -f core *.core core.conftest.* &&
    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
    exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
done
ac_signal=0

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -f -r conftest* confdefs.h

$as_echo "/* confdefs.h */" > confdefs.h

# Predefined preprocessor variables.

cat >>confdefs.h <<_ACEOF
#define PACKAGE_NAME "$PACKAGE_NAME"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION "$PACKAGE_VERSION"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_STRING "$PACKAGE_STRING"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_URL "$PACKAGE_URL"
_ACEOF


# Let the site file select an alternate cache file if it wants to.
# Prefer an explicitly selected file to automatically selected ones.
ac_site_file1=NONE
ac_site_file2=NONE
if test -n "$CONFIG_SITE"; then
  # We do not want a PATH search for config.site.
  case $CONFIG_SITE in #((
    -*)  ac_site_file1=./$CONFIG_SITE;;
    */*) ac_site_file1=$CONFIG_SITE;;
    *)   ac_site_file1=./$CONFIG_SITE;;
  esac
elif test "x$prefix" != xNONE; then
  ac_site_file1=$prefix/share/config.site
  ac_site_file2=$prefix/etc/config.site
else
  ac_site_file1=$ac_default_prefix/share/config.site
  ac_site_file2=$ac_default_prefix/etc/config.site
fi
for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
  test "x$ac_site_file" = xNONE && continue
  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
    sed 's/^/| /' "$ac_site_file" >&5
    . "$ac_site_file" \
      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "failed to load site script $ac_site_file
See \`config.log' for more details" "$LINENO" 5; }
  fi
done

if test -r "$cache_file"; then
  # Some versions of bash will fail to source /dev/null (special files
  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
$as_echo "$as_me: loading cache $cache_file" >&6;}
    case $cache_file in
      [\\/]* | ?:[\\/]* ) . "$cache_file";;
      *)                      . "./$cache_file";;
    esac
  fi
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
$as_echo "$as_me: creating cache $cache_file" >&6;}
  >$cache_file
fi

# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
for ac_var in $ac_precious_vars; do
  eval ac_old_set=\$ac_cv_env_${ac_var}_set
  eval ac_new_set=\$ac_env_${ac_var}_set
  eval ac_old_val=\$ac_cv_env_${ac_var}_value
  eval ac_new_val=\$ac_env_${ac_var}_value
  case $ac_old_set,$ac_new_set in
    set,)
      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,set)
      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,);;
    *)
      if test "x$ac_old_val" != "x$ac_new_val"; then
	# differences in whitespace do not lead to failure.
	ac_old_val_w=`echo x $ac_old_val`
	ac_new_val_w=`echo x $ac_new_val`
	if test "$ac_old_val_w" != "$ac_new_val_w"; then
	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
	  ac_cache_corrupted=:
	else
	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
	  eval $ac_var=\$ac_old_val
	fi
	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
      fi;;
  esac
  # Pass precious variables to config.status.
  if test "$ac_new_set" = set; then
    case $ac_new_val in
    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
    *) ac_arg=$ac_var=$ac_new_val ;;
    esac
    case " $ac_configure_args " in
      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
    esac
  fi
done
if $ac_cache_corrupted; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
fi
## -------------------- ##
## Main body of script. ##
## -------------------- ##

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu



#--------------------------------------------------------------------
# Call TEA_INIT as the first TEA_ macro to set up initial vars.
# This will define a ${TEA_PLATFORM} variable == "unix" or "windows"
# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE.
#--------------------------------------------------------------------


    # TEA extensions pass this us the version of TEA they think they
    # are compatible with.
    TEA_VERSION="3.9"

    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for correct TEA configuration" >&5
$as_echo_n "checking for correct TEA configuration... " >&6; }
    if test x"${PACKAGE_NAME}" = x ; then
	as_fn_error $? "
The PACKAGE_NAME variable must be defined by your TEA configure.ac" "$LINENO" 5
    fi
    if test x"3.9" = x ; then
	as_fn_error $? "
TEA version not specified." "$LINENO" 5
    elif test "3.9" != "${TEA_VERSION}" ; then
	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: warning: requested TEA version \"3.9\", have \"${TEA_VERSION}\"" >&5
$as_echo "warning: requested TEA version \"3.9\", have \"${TEA_VERSION}\"" >&6; }
    else
	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok (TEA ${TEA_VERSION})" >&5
$as_echo "ok (TEA ${TEA_VERSION})" >&6; }
    fi

    # If the user did not set CFLAGS, set it now to keep macros
    # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2".
    if test "${CFLAGS+set}" != "set" ; then
	CFLAGS=""
    fi

    case "`uname -s`" in
	*win32*|*WIN32*|*MINGW32_*)
	    # Extract the first word of "cygpath", so it can be a program name with args.
set dummy cygpath; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CYGPATH+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$CYGPATH"; then
  ac_cv_prog_CYGPATH="$CYGPATH" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_CYGPATH="cygpath -w"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

  test -z "$ac_cv_prog_CYGPATH" && ac_cv_prog_CYGPATH="echo"
fi
fi
CYGPATH=$ac_cv_prog_CYGPATH
if test -n "$CYGPATH"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5
$as_echo "$CYGPATH" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi


	    EXEEXT=".exe"
	    TEA_PLATFORM="windows"
	    ;;
	*CYGWIN_*)
	    CYGPATH=echo
	    EXEEXT=".exe"
	    # TEA_PLATFORM is determined later in LOAD_TCLCONFIG
	    ;;
	*)
	    CYGPATH=echo
	    # Maybe we are cross-compiling....
	    case ${host_alias} in
		*mingw32*)
		EXEEXT=".exe"
		TEA_PLATFORM="windows"
		;;
	    *)
		EXEEXT=""
		TEA_PLATFORM="unix"
		;;
	    esac
	    ;;
    esac

    # Check if exec_prefix is set. If not use fall back to prefix.
    # Note when adjusted, so that TEA_PREFIX can correct for this.
    # This is needed for recursive configures, since autoconf propagates
    # $prefix, but not $exec_prefix (doh!).
    if test x$exec_prefix = xNONE ; then
	exec_prefix_default=yes
	exec_prefix=$prefix
    fi

    { $as_echo "$as_me:${as_lineno-$LINENO}: configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}" >&5
$as_echo "$as_me: configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}" >&6;}




    # This package name must be replaced statically for AC_SUBST to work

    # Substitute STUB_LIB_FILE in case package creates a stub library too.


    # We AC_SUBST these here to ensure they are subst'ed,
    # in case the user doesn't call TEA_ADD_...









ac_aux_dir=
for ac_dir in tclconfig "$srcdir"/tclconfig; do
  if test -f "$ac_dir/install-sh"; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f "$ac_dir/install.sh"; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  elif test -f "$ac_dir/shtool"; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/shtool install -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  as_fn_error $? "cannot find install-sh, install.sh, or shtool in tclconfig \"$srcdir\"/tclconfig" "$LINENO" 5
fi

# These three variables are undocumented and unsupported,
# and are intended to be withdrawn in a future Autoconf release.
# They can cause serious problems if a builder's source tree is in a directory
# whose full name contains unusual characters.
ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.



#--------------------------------------------------------------------
# Load the tclConfig.sh file
#--------------------------------------------------------------------



    #
    # Ok, lets find the tcl configuration
    # First, look for one uninstalled.
    # the alternative search directory is invoked by --with-tcl
    #

    if test x"${no_tcl}" = x ; then
	# we reset no_tcl in case something fails here
	no_tcl=true

# Check whether --with-tcl was given.
if test "${with_tcl+set}" = set; then :
  withval=$with_tcl; with_tclconfig="${withval}"
fi

	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Tcl configuration" >&5
$as_echo_n "checking for Tcl configuration... " >&6; }
	if ${ac_cv_c_tclconfig+:} false; then :
  $as_echo_n "(cached) " >&6
else


	    # First check to see if --with-tcl was specified.
	    if test x"${with_tclconfig}" != x ; then
		case "${with_tclconfig}" in
		    */tclConfig.sh )
			if test -f "${with_tclconfig}"; then
			    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&5
$as_echo "$as_me: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&2;}
			    with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`"
			fi ;;
		esac
		if test -f "${with_tclconfig}/tclConfig.sh" ; then
		    ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`"
		else
		    as_fn_error $? "${with_tclconfig} directory doesn't contain tclConfig.sh" "$LINENO" 5
		fi
	    fi

	    # then check for a private Tcl installation
	    if test x"${ac_cv_c_tclconfig}" = x ; then
		for i in \
			../tcl \
			`ls -dr ../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \
			`ls -dr ../tcl[8-9].[0-9] 2>/dev/null` \
			`ls -dr ../tcl[8-9].[0-9]* 2>/dev/null` \
			../../tcl \
			`ls -dr ../../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \
			`ls -dr ../../tcl[8-9].[0-9] 2>/dev/null` \
			`ls -dr ../../tcl[8-9].[0-9]* 2>/dev/null` \
			../../../tcl \
			`ls -dr ../../../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \
			`ls -dr ../../../tcl[8-9].[0-9] 2>/dev/null` \
			`ls -dr ../../../tcl[8-9].[0-9]* 2>/dev/null` ; do
		    if test "${TEA_PLATFORM}" = "windows" \
			    -a -f "$i/win/tclConfig.sh" ; then
			ac_cv_c_tclconfig="`(cd $i/win; pwd)`"
			break
		    fi
		    if test -f "$i/unix/tclConfig.sh" ; then
			ac_cv_c_tclconfig="`(cd $i/unix; pwd)`"
			break
		    fi
		done
	    fi

	    # on Darwin, check in Framework installation locations
	    if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then
		for i in `ls -d ~/Library/Frameworks 2>/dev/null` \
			`ls -d /Library/Frameworks 2>/dev/null` \
			`ls -d /Network/Library/Frameworks 2>/dev/null` \
			`ls -d /System/Library/Frameworks 2>/dev/null` \
			; do
		    if test -f "$i/Tcl.framework/tclConfig.sh" ; then
			ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`"
			break
		    fi
		done
	    fi

	    # TEA specific: on Windows, check in common installation locations
	    if test "${TEA_PLATFORM}" = "windows" \
		-a x"${ac_cv_c_tclconfig}" = x ; then
		for i in `ls -d C:/Tcl/lib 2>/dev/null` \
			`ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \
			; do
		    if test -f "$i/tclConfig.sh" ; then
			ac_cv_c_tclconfig="`(cd $i; pwd)`"
			break
		    fi
		done
	    fi

	    # check in a few common install locations
	    if test x"${ac_cv_c_tclconfig}" = x ; then
		for i in `ls -d ${libdir} 2>/dev/null` \
			`ls -d ${exec_prefix}/lib 2>/dev/null` \
			`ls -d ${prefix}/lib 2>/dev/null` \
			`ls -d /usr/local/lib 2>/dev/null` \
			`ls -d /usr/contrib/lib 2>/dev/null` \
			`ls -d /usr/lib 2>/dev/null` \
			`ls -d /usr/lib64 2>/dev/null` \
			`ls -d /usr/lib/tcl8.6 2>/dev/null` \
			`ls -d /usr/lib/tcl8.5 2>/dev/null` \
			; do
		    if test -f "$i/tclConfig.sh" ; then
			ac_cv_c_tclconfig="`(cd $i; pwd)`"
			break
		    fi
		done
	    fi

	    # check in a few other private locations
	    if test x"${ac_cv_c_tclconfig}" = x ; then
		for i in \
			${srcdir}/../tcl \
			`ls -dr ${srcdir}/../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \
			`ls -dr ${srcdir}/../tcl[8-9].[0-9] 2>/dev/null` \
			`ls -dr ${srcdir}/../tcl[8-9].[0-9]* 2>/dev/null` ; do
		    if test "${TEA_PLATFORM}" = "windows" \
			    -a -f "$i/win/tclConfig.sh" ; then
			ac_cv_c_tclconfig="`(cd $i/win; pwd)`"
			break
		    fi
		    if test -f "$i/unix/tclConfig.sh" ; then
			ac_cv_c_tclconfig="`(cd $i/unix; pwd)`"
			break
		    fi
		done
	    fi

fi


	if test x"${ac_cv_c_tclconfig}" = x ; then
	    TCL_BIN_DIR="# no Tcl configs found"
	    as_fn_error $? "Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh" "$LINENO" 5
	else
	    no_tcl=
	    TCL_BIN_DIR="${ac_cv_c_tclconfig}"
	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: found ${TCL_BIN_DIR}/tclConfig.sh" >&5
$as_echo "found ${TCL_BIN_DIR}/tclConfig.sh" >&6; }
	fi
    fi

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CC+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_CC="${ac_tool_prefix}gcc"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi


fi
if test -z "$ac_cv_prog_CC"; then
  ac_ct_CC=$CC
  # Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_CC+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$ac_ct_CC"; then
  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_ac_ct_CC="gcc"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
$as_echo "$ac_ct_CC" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi

  if test "x$ac_ct_CC" = x; then
    CC=""
  else
    case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
    CC=$ac_ct_CC
  fi
else
  CC="$ac_cv_prog_CC"
fi

if test -z "$CC"; then
          if test -n "$ac_tool_prefix"; then
    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CC+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_CC="${ac_tool_prefix}cc"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi


  fi
fi
if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CC+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  ac_prog_rejected=no
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
       ac_prog_rejected=yes
       continue
     fi
    ac_cv_prog_CC="cc"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_CC
  shift
  if test $# != 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
  fi
fi
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi


fi
if test -z "$CC"; then
  if test -n "$ac_tool_prefix"; then
  for ac_prog in cl.exe
  do
    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_CC+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi


    test -n "$CC" && break
  done
fi
if test -z "$CC"; then
  ac_ct_CC=$CC
  for ac_prog in cl.exe
do
  # Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_CC+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$ac_ct_CC"; then
  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_ac_ct_CC="$ac_prog"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
$as_echo "$ac_ct_CC" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi


  test -n "$ac_ct_CC" && break
done

  if test "x$ac_ct_CC" = x; then
    CC=""
  else
    case $cross_compiling:$ac_tool_warned in
yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
    CC=$ac_ct_CC
  fi
fi

fi


test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "no acceptable C compiler found in \$PATH
See \`config.log' for more details" "$LINENO" 5; }

# Provide some information about the compiler.
$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
set X $ac_compile
ac_compiler=$2
for ac_option in --version -v -V -qversion; do
  { { ac_try="$ac_compiler $ac_option >&5"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
  ac_status=$?
  if test -s conftest.err; then
    sed '10a\
... rest of stderr output deleted ...
         10q' conftest.err >conftest.er1
    cat conftest.er1 >&5
  fi
  rm -f conftest.er1 conftest.err
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }
done

cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
$as_echo_n "checking whether the C compiler works... " >&6; }
ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`

# The possible output files:
ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"

ac_rmfiles=
for ac_file in $ac_files
do
  case $ac_file in
    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
  esac
done
rm -f $ac_rmfiles

if { { ac_try="$ac_link_default"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_link_default") 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; then :
  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
# in a Makefile.  We should not override ac_cv_exeext if it was cached,
# so that the user can short-circuit this test for compilers unknown to
# Autoconf.
for ac_file in $ac_files ''
do
  test -f "$ac_file" || continue
  case $ac_file in
    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
	;;
    [ab].out )
	# We found the default executable, but exeext='' is most
	# certainly right.
	break;;
    *.* )
	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
	then :; else
	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
	fi
	# We set ac_cv_exeext here because the later test for it is not
	# safe: cross compilers may not add the suffix if given an `-o'
	# argument, so we may need to know it at that point already.
	# Even if this section looks crufty: it has the advantage of
	# actually working.
	break;;
    * )
	break;;
  esac
done
test "$ac_cv_exeext" = no && ac_cv_exeext=

else
  ac_file=''
fi
if test -z "$ac_file"; then :
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error 77 "C compiler cannot create executables
See \`config.log' for more details" "$LINENO" 5; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
$as_echo_n "checking for C compiler default output file name... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
$as_echo "$ac_file" >&6; }
ac_exeext=$ac_cv_exeext

rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
$as_echo_n "checking for suffix of executables... " >&6; }
if { { ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_link") 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; then :
  # If both `conftest.exe' and `conftest' are `present' (well, observable)
# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
# work properly (i.e., refer to `conftest.exe'), while it won't with
# `rm'.
for ac_file in conftest.exe conftest conftest.*; do
  test -f "$ac_file" || continue
  case $ac_file in
    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
	  break;;
    * ) break;;
  esac
done
else
  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest conftest$ac_cv_exeext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
$as_echo "$ac_cv_exeext" >&6; }

rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#include <stdio.h>
int
main ()
{
FILE *f = fopen ("conftest.out", "w");
 return ferror (f) || fclose (f) != 0;

  ;
  return 0;
}
_ACEOF
ac_clean_files="$ac_clean_files conftest.out"
# Check that the compiler produces executables we can run.  If not, either
# the compiler is broken, or we cross compile.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
$as_echo_n "checking whether we are cross compiling... " >&6; }
if test "$cross_compiling" != yes; then
  { { ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_link") 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }
  if { ac_try='./conftest$ac_cv_exeext'
  { { case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; }; then
    cross_compiling=no
  else
    if test "$cross_compiling" = maybe; then
	cross_compiling=yes
    else
	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details" "$LINENO" 5; }
    fi
  fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
$as_echo "$cross_compiling" >&6; }

rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
ac_clean_files=$ac_clean_files_save
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
$as_echo_n "checking for suffix of object files... " >&6; }
if ${ac_cv_objext+:} false; then :
  $as_echo_n "(cached) " >&6
else
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.o conftest.obj
if { { ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
  (eval "$ac_compile") 2>&5
  ac_status=$?
  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
  test $ac_status = 0; }; then :
  for ac_file in conftest.o conftest.obj conftest.*; do
  test -f "$ac_file" || continue;
  case $ac_file in
    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
       break;;
  esac
done
else
  $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "cannot compute suffix of object files: cannot compile
See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
$as_echo "$ac_cv_objext" >&6; }
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
if ${ac_cv_c_compiler_gnu+:} false; then :
  $as_echo_n "(cached) " >&6
else
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{
#ifndef __GNUC__
       choke me
#endif

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_compiler_gnu=yes
else
  ac_compiler_gnu=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
$as_echo "$ac_cv_c_compiler_gnu" >&6; }
if test $ac_compiler_gnu = yes; then
  GCC=yes
else
  GCC=
fi
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
$as_echo_n "checking whether $CC accepts -g... " >&6; }
if ${ac_cv_prog_cc_g+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_save_c_werror_flag=$ac_c_werror_flag
   ac_c_werror_flag=yes
   ac_cv_prog_cc_g=no
   CFLAGS="-g"
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_cv_prog_cc_g=yes
else
  CFLAGS=""
      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :

else
  ac_c_werror_flag=$ac_save_c_werror_flag
	 CFLAGS="-g"
	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_cv_prog_cc_g=yes
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   ac_c_werror_flag=$ac_save_c_werror_flag
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
$as_echo "$ac_cv_prog_cc_g" >&6; }
if test "$ac_test_CFLAGS" = set; then
  CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
if ${ac_cv_prog_cc_c89+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_cv_prog_cc_c89=no
ac_save_CC=$CC
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#include <stdarg.h>
#include <stdio.h>
struct stat;
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
static char *e (p, i)
     char **p;
     int i;
{
  return p[i];
}
static char *f (char * (*g) (char **, int), char **p, ...)
{
  char *s;
  va_list v;
  va_start (v,p);
  s = g (p, va_arg (v,int));
  va_end (v);
  return s;
}

/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
   function prototypes and stuff, but not '\xHH' hex character constants.
   These don't provoke an error unfortunately, instead are silently treated
   as 'x'.  The following induces an error, until -std is added to get
   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
   array size at least.  It's necessary to write '\x00'==0 to get something
   that's true only with -std.  */
int osf4_cc_array ['\x00' == 0 ? 1 : -1];

/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
   inside strings and character constants.  */
#define FOO(x) 'x'
int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];

int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
int argc;
char **argv;
int
main ()
{
return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
  ;
  return 0;
}
_ACEOF
for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
  CC="$ac_save_CC $ac_arg"
  if ac_fn_c_try_compile "$LINENO"; then :
  ac_cv_prog_cc_c89=$ac_arg
fi
rm -f core conftest.err conftest.$ac_objext
  test "x$ac_cv_prog_cc_c89" != "xno" && break
done
rm -f conftest.$ac_ext
CC=$ac_save_CC

fi
# AC_CACHE_VAL
case "x$ac_cv_prog_cc_c89" in
  x)
    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
$as_echo "none needed" >&6; } ;;
  xno)
    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
$as_echo "unsupported" >&6; } ;;
  *)
    CC="$CC $ac_cv_prog_cc_c89"
    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
esac
if test "x$ac_cv_prog_cc_c89" != xno; then :

fi

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu



    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for existence of ${TCL_BIN_DIR}/tclConfig.sh" >&5
$as_echo_n "checking for existence of ${TCL_BIN_DIR}/tclConfig.sh... " >&6; }

    if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then
        { $as_echo "$as_me:${as_lineno-$LINENO}: result: loading" >&5
$as_echo "loading" >&6; }
	. "${TCL_BIN_DIR}/tclConfig.sh"
    else
        { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not find ${TCL_BIN_DIR}/tclConfig.sh" >&5
$as_echo "could not find ${TCL_BIN_DIR}/tclConfig.sh" >&6; }
    fi

    # eval is required to do the TCL_DBGX substitution
    eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\""
    eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\""

    # If the TCL_BIN_DIR is the build directory (not the install directory),
    # then set the common variable name to the value of the build variables.
    # For example, the variable TCL_LIB_SPEC will be set to the value
    # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC
    # instead of TCL_BUILD_LIB_SPEC since it will work with both an
    # installed and uninstalled version of Tcl.
    if test -f "${TCL_BIN_DIR}/Makefile" ; then
        TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}"
        TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}"
        TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}"
    elif test "`uname -s`" = "Darwin"; then
	# If Tcl was built as a framework, attempt to use the libraries
	# from the framework at the given location so that linking works
	# against Tcl.framework installed in an arbitrary location.
	case ${TCL_DEFS} in
	    *TCL_FRAMEWORK*)
		if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then
		    for i in "`cd "${TCL_BIN_DIR}"; pwd`" \
			     "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do
			if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then
			    TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}"
			    break
			fi
		    done
		fi
		if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then
		    TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}"  | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}"
		    TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"
		fi
		;;
	esac
    fi

    # eval is required to do the TCL_DBGX substitution
    eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\""
    eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\""
    eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\""
    eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\""














    { $as_echo "$as_me:${as_lineno-$LINENO}: checking platform" >&5
$as_echo_n "checking platform... " >&6; }
    hold_cc=$CC; CC="$TCL_CC"
    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */

int
main ()
{

	    #ifdef _WIN32
		#error win32
	    #endif

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  TEA_PLATFORM="unix"
else
  TEA_PLATFORM="windows"

fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
    CC=$hold_cc
    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEA_PLATFORM" >&5
$as_echo "$TEA_PLATFORM" >&6; }

    # The BUILD_$pkg is to define the correct extern storage class
    # handling when making this package

cat >>confdefs.h <<_ACEOF
#define BUILD_${PACKAGE_NAME} /**/
_ACEOF

    # Do this here as we have fully defined TEA_PLATFORM now
    if test "${TEA_PLATFORM}" = "windows" ; then
	EXEEXT=".exe"
	CLEANFILES="$CLEANFILES *.lib *.dll *.pdb *.exp"
    fi

    # TEA specific:








#--------------------------------------------------------------------
# Load the tkConfig.sh file if necessary (Tk extension)
#--------------------------------------------------------------------

#TEA_PATH_TKCONFIG
#TEA_LOAD_TKCONFIG

#-----------------------------------------------------------------------
# Handle the --prefix=... option by defaulting to what Tcl gave.
# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER.
#-----------------------------------------------------------------------


    if test "${prefix}" = "NONE"; then
	prefix_default=yes
	if test x"${TCL_PREFIX}" != x; then
	    { $as_echo "$as_me:${as_lineno-$LINENO}: --prefix defaulting to TCL_PREFIX ${TCL_PREFIX}" >&5
$as_echo "$as_me: --prefix defaulting to TCL_PREFIX ${TCL_PREFIX}" >&6;}
	    prefix=${TCL_PREFIX}
	else
	    { $as_echo "$as_me:${as_lineno-$LINENO}: --prefix defaulting to /usr/local" >&5
$as_echo "$as_me: --prefix defaulting to /usr/local" >&6;}
	    prefix=/usr/local
	fi
    fi
    if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \
	-o x"${exec_prefix_default}" = x"yes" ; then
	if test x"${TCL_EXEC_PREFIX}" != x; then
	    { $as_echo "$as_me:${as_lineno-$LINENO}: --exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}" >&5
$as_echo "$as_me: --exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}" >&6;}
	    exec_prefix=${TCL_EXEC_PREFIX}
	else
	    { $as_echo "$as_me:${as_lineno-$LINENO}: --exec-prefix defaulting to ${prefix}" >&5
$as_echo "$as_me: --exec-prefix defaulting to ${prefix}" >&6;}
	    exec_prefix=$prefix
	fi
    fi


#-----------------------------------------------------------------------
# Allow the user to influence the location where the module will be
# installed by passing moduledir=path to configure.
# The default path for moduledir is ${libdir}/tcl8/8.6
#-----------------------------------------------------------------------



    if test "${ac_cv_env_moduledir_set}x" = "x"; then
	moduledir='${libdir}/tcl8/8.6'
    fi


#-----------------------------------------------------------------------
# Standard compiler checks.
# This sets up CC by using the CC env var, or looks for gcc otherwise.
# This also calls AC_PROG_CC and a few others to create the basic setup
# necessary to compile executables.
#-----------------------------------------------------------------------

#TEA_SETUP_COMPILER
# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AmigaOS /C/install, which installs bootblocks on floppy discs
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
# Reject install programs that cannot install multiple files.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
$as_echo_n "checking for a BSD-compatible install... " >&6; }
if test -z "$INSTALL"; then
if ${ac_cv_path_install+:} false; then :
  $as_echo_n "(cached) " >&6
else
  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    # Account for people who put trailing slashes in PATH elements.
case $as_dir/ in #((
  ./ | .// | /[cC]/* | \
  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
  /usr/ucb/* ) ;;
  *)
    # OSF1 and SCO ODT 3.0 have their own names for install.
    # Don't use installbsd from OSF since it installs stuff as root
    # by default.
    for ac_prog in ginstall scoinst install; do
      for ac_exec_ext in '' $ac_executable_extensions; do
	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
	  if test $ac_prog = install &&
	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  elif test $ac_prog = install &&
	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
	    # program-specific install script used by HP pwplus--don't use.
	    :
	  else
	    rm -rf conftest.one conftest.two conftest.dir
	    echo one > conftest.one
	    echo two > conftest.two
	    mkdir conftest.dir
	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
	      test -s conftest.one && test -s conftest.two &&
	      test -s conftest.dir/conftest.one &&
	      test -s conftest.dir/conftest.two
	    then
	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
	      break 3
	    fi
	  fi
	fi
      done
    done
    ;;
esac

  done
IFS=$as_save_IFS

rm -rf conftest.one conftest.two conftest.dir

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL=$ac_cv_path_install
  else
    # As a last resort, use the slow shell script.  Don't cache a
    # value for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the value is a relative name.
    INSTALL=$ac_install_sh
  fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
$as_echo "$INSTALL" >&6; }

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'


#-----------------------------------------------------------------------
# __CHANGE__
# Specify the C source files to compile in TEA_ADD_SOURCES,
# public headers that need to be installed in TEA_ADD_HEADERS,
# stub library C source files to compile in TEA_ADD_STUB_SOURCES,
# and runtime Tcl library files in TEA_ADD_TCL_SOURCES.
# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS
# and PKG_TCL_SOURCES.
#-----------------------------------------------------------------------


    vars=""
    for i in $vars; do
	case $i in
	    \$*)
		# allow $-var names
		PKG_SOURCES="$PKG_SOURCES $i"
		PKG_OBJECTS="$PKG_OBJECTS $i"
		;;
	    *)
		# check for existence - allows for generic/win/unix VPATH
		# To add more dirs here (like 'src'), you have to update VPATH
		# in Makefile.in as well
		if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
		    -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
		    -a ! -f "${srcdir}/macosx/$i" \
		    ; then
		    as_fn_error $? "could not find source file '$i'" "$LINENO" 5
		fi
		PKG_SOURCES="$PKG_SOURCES $i"
		# this assumes it is in a VPATH dir
		i=`basename $i`
		# handle user calling this before or after TEA_SETUP_COMPILER
		if test x"${OBJEXT}" != x ; then
		    j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}"
		else
		    j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}"
		fi
		PKG_OBJECTS="$PKG_OBJECTS $j"
		;;
	esac
    done




    vars=""
    for i in $vars; do
	# check for existence, be strict because it is installed
	if test ! -f "${srcdir}/$i" ; then
	    as_fn_error $? "could not find header file '${srcdir}/$i'" "$LINENO" 5
	fi
	PKG_HEADERS="$PKG_HEADERS $i"
    done



    vars=""
    for i in $vars; do
	PKG_INCLUDES="$PKG_INCLUDES $i"
    done



    vars=""
    for i in $vars; do
	if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then
	    # Convert foo.lib to -lfoo for GCC.  No-op if not *.lib
	    i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'`
	fi
	PKG_LIBS="$PKG_LIBS $i"
    done



    PKG_CFLAGS="$PKG_CFLAGS "



    vars=""
    for i in $vars; do
	# check for existence - allows for generic/win/unix VPATH
	if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
	    -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
	    -a ! -f "${srcdir}/macosx/$i" \
	    ; then
	    as_fn_error $? "could not find stub source file '$i'" "$LINENO" 5
	fi
	PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i"
	# this assumes it is in a VPATH dir
	i=`basename $i`
	# handle user calling this before or after TEA_SETUP_COMPILER
	if test x"${OBJEXT}" != x ; then
	    j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}"
	else
	    j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}"
	fi
	PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j"
    done




    vars="dbif.tcl"
    for i in $vars; do
	# check for existence, be strict because it is installed
	if test ! -f "${srcdir}/$i" ; then
	    as_fn_error $? "could not find tcl source file '${srcdir}/$i'" "$LINENO" 5
	fi
	PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i"
    done



#--------------------------------------------------------------------
# __CHANGE__
#
# You can add more files to clean if your extension creates any extra
# files by extending CLEANFILES.
# Add pkgIndex.tcl if it is generated in the Makefile instead of ./configure
# and change Makefile.in to move it from CONFIG_CLEAN_FILES to BINARIES var.
#
# A few miscellaneous platform-specific items:
# TEA_ADD_* any platform specific compiler/build info here.
#--------------------------------------------------------------------

#CLEANFILES="$CLEANFILES pkgIndex.tcl"
if test "${TEA_PLATFORM}" = "windows" ; then
    # Ensure no empty if clauses
    :
    #TEA_ADD_SOURCES([win/winFile.c])
    #TEA_ADD_INCLUDES([-I\"$(${CYGPATH} ${srcdir}/win)\"])
else
    # Ensure no empty else clauses
    :
    #TEA_ADD_SOURCES([unix/unixFile.c])
    #TEA_ADD_LIBS([-lsuperfly])
fi

#--------------------------------------------------------------------
# __CHANGE__
# Choose which headers you need.  Extension authors should try very
# hard to only rely on the Tcl public header files.  Internal headers
# contain private data structures and are subject to change without
# notice.
# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG
#--------------------------------------------------------------------

#TEA_PUBLIC_TCL_HEADERS
#TEA_PRIVATE_TCL_HEADERS

#TEA_PUBLIC_TK_HEADERS
#TEA_PRIVATE_TK_HEADERS
#TEA_PATH_X

#--------------------------------------------------------------------
# Check whether --enable-threads or --disable-threads was given.
# This auto-enables if Tcl was compiled threaded.
#--------------------------------------------------------------------

#TEA_ENABLE_THREADS

#--------------------------------------------------------------------
# The statement below defines a collection of symbols related to
# building as a shared library instead of a static library.
#--------------------------------------------------------------------

#TEA_ENABLE_SHARED

#--------------------------------------------------------------------
# This macro figures out what flags to use with the compiler/linker
# when building shared/static debug/optimized objects.  This information
# can be taken from the tclConfig.sh file, but this figures it all out.
#--------------------------------------------------------------------

#TEA_CONFIG_CFLAGS

#--------------------------------------------------------------------
# Set the default compiler switches based on the --enable-symbols option.
#--------------------------------------------------------------------

#TEA_ENABLE_SYMBOLS

#--------------------------------------------------------------------
# Everyone should be linking against the Tcl stub library.  If you
# can't for some reason, remove this definition.  If you aren't using
# stubs, you also need to modify the SHLIB_LD_LIBS setting below to
# link against the non-stubbed Tcl library.  Add Tk too if necessary.
#--------------------------------------------------------------------

#AC_DEFINE(USE_TCL_STUBS, 1, [Use Tcl stubs])
#AC_DEFINE(USE_TK_STUBS, 1, [Use Tk stubs])

#--------------------------------------------------------------------
# This macro generates a line to use when building a library.  It
# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS,
# and TEA_LOAD_TCLCONFIG macros above.
#--------------------------------------------------------------------

#TEA_MAKE_LIB

#--------------------------------------------------------------------
# Determine the name of the tclsh and/or wish executables in the
# Tcl and Tk build directories or the location they were installed
# into. These paths are used to support running test cases only,
# the Makefile should not be making use of these paths to generate
# a pkgIndex.tcl file or anything else at extension build time.
#--------------------------------------------------------------------


    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tclsh" >&5
$as_echo_n "checking for tclsh... " >&6; }
    if test -f "${TCL_BIN_DIR}/Makefile" ; then
        # tclConfig.sh is in Tcl build directory
        if test "${TEA_PLATFORM}" = "windows"; then
            TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}"
        else
            TCLSH_PROG="${TCL_BIN_DIR}/tclsh"
        fi
    else
        # tclConfig.sh is in install location
        if test "${TEA_PLATFORM}" = "windows"; then
            TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}"
        else
            TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}"
        fi
        list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \
              `ls -d ${TCL_BIN_DIR}/..     2>/dev/null` \
              `ls -d ${TCL_PREFIX}/bin     2>/dev/null`"
        for i in $list ; do
            if test -f "$i/${TCLSH_PROG}" ; then
                REAL_TCL_BIN_DIR="`cd "$i"; pwd`/"
                break
            fi
        done
        TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}"
    fi
    { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${TCLSH_PROG}" >&5
$as_echo "${TCLSH_PROG}" >&6; }


#TEA_PROG_WISH

# Extract the first word of "dtplite", so it can be a program name with args.
set dummy dtplite; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_path_DTPLITE_PROG+:} false; then :
  $as_echo_n "(cached) " >&6
else
  case $DTPLITE_PROG in
  [\\/]* | ?:[\\/]*)
  ac_cv_path_DTPLITE_PROG="$DTPLITE_PROG" # Let the user override the test with a path.
  ;;
  *)
  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_path_DTPLITE_PROG="$as_dir/$ac_word$ac_exec_ext"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

  ;;
esac
fi
DTPLITE_PROG=$ac_cv_path_DTPLITE_PROG
if test -n "$DTPLITE_PROG"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DTPLITE_PROG" >&5
$as_echo "$DTPLITE_PROG" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi


INSTALLDOC=install-doc

if test "x${DTPLITE_PROG}" = "x" ; then
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Doctools not found. Documentation will not be generated." >&5
$as_echo "$as_me: WARNING: Doctools not found. Documentation will not be generated." >&2;}
    DTPLITE_PROG=@:

    INSTALLDOC=""
fi

# Create the doc directory in the build environment vor building docs

ac_config_commands="$ac_config_commands doc"


#--------------------------------------------------------------------
# Finally, substitute all of the various values into the Makefile.
# You may alternatively have a special pkgIndex.tcl.in or other files
# which require substituting th AC variables in.  Include these here.
#--------------------------------------------------------------------

ac_config_files="$ac_config_files Makefile"

cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems.  If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.

_ACEOF

# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, we kill variables containing newlines.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(
  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
    eval ac_val=\$$ac_var
    case $ac_val in #(
    *${as_nl}*)
      case $ac_var in #(
      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
      esac
      case $ac_var in #(
      _ | IFS | as_nl) ;; #(
      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
      *) { eval $ac_var=; unset $ac_var;} ;;
      esac ;;
    esac
  done

  (set) 2>&1 |
    case $as_nl`(ac_space=' '; set) 2>&1` in #(
    *${as_nl}ac_space=\ *)
      # `set' does not quote correctly, so add quotes: double-quote
      # substitution turns \\\\ into \\, and sed turns \\ into \.
      sed -n \
	"s/'/'\\\\''/g;
	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
      ;; #(
    *)
      # `set' quotes correctly as required by POSIX, so do not add quotes.
      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
      ;;
    esac |
    sort
) |
  sed '
     /^ac_cv_env_/b end
     t clear
     :clear
     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
     t end
     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
     :end' >>confcache
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
  if test -w "$cache_file"; then
    if test "x$cache_file" != "x/dev/null"; then
      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
$as_echo "$as_me: updating cache $cache_file" >&6;}
      if test ! -f "$cache_file" || test -h "$cache_file"; then
	cat confcache >"$cache_file"
      else
        case $cache_file in #(
        */* | ?:*)
	  mv -f confcache "$cache_file"$$ &&
	  mv -f "$cache_file"$$ "$cache_file" ;; #(
        *)
	  mv -f confcache "$cache_file" ;;
	esac
      fi
    fi
  else
    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
  fi
fi
rm -f confcache

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
#
# If the first sed substitution is executed (which looks for macros that
# take arguments), then branch to the quote section.  Otherwise,
# look for a macro that doesn't take arguments.
ac_script='
:mline
/\\$/{
 N
 s,\\\n,,
 b mline
}
t clear
:clear
s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
t quote
s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
t quote
b any
:quote
s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
s/\[/\\&/g
s/\]/\\&/g
s/\$/$$/g
H
:any
${
	g
	s/^\n//
	s/\n/ /g
	p
}
'
DEFS=`sed -n "$ac_script" confdefs.h`


ac_libobjs=
ac_ltlibobjs=
U=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
  # 1. Remove the extension, and $U if already installed.
  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
  #    will be set to the directory where LIBOBJS objects are built.
  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs

LTLIBOBJS=$ac_ltlibobjs



: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
as_write_fail=0
cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.

debug=false
ac_cs_recheck=false
ac_cs_silent=false

SHELL=\${CONFIG_SHELL-$SHELL}
export SHELL
_ASEOF
cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##

# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
  emulate sh
  NULLCMD=:
  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in #(
  *posix*) :
    set -o posix ;; #(
  *) :
     ;;
esac
fi


as_nl='
'
export as_nl
# Printing a long string crashes Solaris 7 /usr/bin/printf.
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
# Prefer a ksh shell builtin over an external printf program on Solaris,
# but without wasting forks for bash or zsh.
if test -z "$BASH_VERSION$ZSH_VERSION" \
    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
  as_echo='print -r --'
  as_echo_n='print -rn --'
elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
  as_echo='printf %s\n'
  as_echo_n='printf %s'
else
  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
    as_echo_n='/usr/ucb/echo -n'
  else
    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
    as_echo_n_body='eval
      arg=$1;
      case $arg in #(
      *"$as_nl"*)
	expr "X$arg" : "X\\(.*\\)$as_nl";
	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
      esac;
      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
    '
    export as_echo_n_body
    as_echo_n='sh -c $as_echo_n_body as_echo'
  fi
  export as_echo_body
  as_echo='sh -c $as_echo_body as_echo'
fi

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  PATH_SEPARATOR=:
  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
      PATH_SEPARATOR=';'
  }
fi


# IFS
# We need space, tab and new line, in precisely that order.  Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
IFS=" ""	$as_nl"

# Find who we are.  Look in the path if we contain no directory separator.
as_myself=
case $0 in #((
  *[\\/]* ) as_myself=$0 ;;
  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
  done
IFS=$as_save_IFS

     ;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
  as_myself=$0
fi
if test ! -f "$as_myself"; then
  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
  exit 1
fi

# Unset variables that we do not need and which cause bugs (e.g. in
# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
# suppresses any "Segmentation fault" message there.  '((' could
# trigger a bug in pdksh 5.2.14.
for as_var in BASH_ENV ENV MAIL MAILPATH
do eval test x\${$as_var+set} = xset \
  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
PS4='+ '

# NLS nuisances.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE

# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH


# as_fn_error STATUS ERROR [LINENO LOG_FD]
# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
  as_status=$1; test $as_status -eq 0 && as_status=1
  if test "$4"; then
    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
  fi
  $as_echo "$as_me: error: $2" >&2
  as_fn_exit $as_status
} # as_fn_error


# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.
as_fn_set_status ()
{
  return $1
} # as_fn_set_status

# as_fn_exit STATUS
# -----------------
# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
as_fn_exit ()
{
  set +e
  as_fn_set_status $1
  exit $1
} # as_fn_exit

# as_fn_unset VAR
# ---------------
# Portably unset VAR.
as_fn_unset ()
{
  { eval $1=; unset $1;}
}
as_unset=as_fn_unset
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over
# repeated appends, instead of the typical quadratic growth present in naive
# implementations.
if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
  eval 'as_fn_append ()
  {
    eval $1+=\$2
  }'
else
  as_fn_append ()
  {
    eval $1=\$$1\$2
  }
fi # as_fn_append

# as_fn_arith ARG...
# ------------------
# Perform arithmetic evaluation on the ARGs, and store the result in the
# global $as_val. Take advantage of shells that can avoid forks. The arguments
# must be portable across $(()) and expr.
if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
  eval 'as_fn_arith ()
  {
    as_val=$(( $* ))
  }'
else
  as_fn_arith ()
  {
    as_val=`expr "$@" || test $? -eq 1`
  }
fi # as_fn_arith


if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
  as_basename=basename
else
  as_basename=false
fi

if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
  as_dirname=dirname
else
  as_dirname=false
fi

as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
	 X"$0" : 'X\(//\)$' \| \
	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`

# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in #(((((
-n*)
  case `echo 'xy\c'` in
  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
  xy)  ECHO_C='\c';;
  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
       ECHO_T='	';;
  esac;;
*)
  ECHO_N='-n';;
esac

rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
  rm -f conf$$.dir/conf$$.file
else
  rm -f conf$$.dir
  mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
  if ln -s conf$$.file conf$$ 2>/dev/null; then
    as_ln_s='ln -s'
    # ... but there are two gotchas:
    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
    # In both cases, we have to default to `cp -pR'.
    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
      as_ln_s='cp -pR'
  elif ln conf$$.file conf$$ 2>/dev/null; then
    as_ln_s=ln
  else
    as_ln_s='cp -pR'
  fi
else
  as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null


# as_fn_mkdir_p
# -------------
# Create "$as_dir" as a directory, including parents if necessary.
as_fn_mkdir_p ()
{

  case $as_dir in #(
  -*) as_dir=./$as_dir;;
  esac
  test -d "$as_dir" || eval $as_mkdir_p || {
    as_dirs=
    while :; do
      case $as_dir in #(
      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
      *) as_qdir=$as_dir;;
      esac
      as_dirs="'$as_qdir' $as_dirs"
      as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
      test -d "$as_dir" && break
    done
    test -z "$as_dirs" || eval "mkdir $as_dirs"
  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"


} # as_fn_mkdir_p
if mkdir -p . 2>/dev/null; then
  as_mkdir_p='mkdir -p "$as_dir"'
else
  test -d ./-p && rmdir ./-p
  as_mkdir_p=false
fi


# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
  test -f "$1" && test -x "$1"
} # as_fn_executable_p
as_test_x='test -x'
as_executable_p=as_fn_executable_p

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"


exec 6>&1
## ----------------------------------- ##
## Main body of $CONFIG_STATUS script. ##
## ----------------------------------- ##
_ASEOF
test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# Save the log message, to keep $0 and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by dbif $as_me 1.2, which was
generated by GNU Autoconf 2.69.  Invocation command line was

  CONFIG_FILES    = $CONFIG_FILES
  CONFIG_HEADERS  = $CONFIG_HEADERS
  CONFIG_LINKS    = $CONFIG_LINKS
  CONFIG_COMMANDS = $CONFIG_COMMANDS
  $ $0 $@

on `(hostname || uname -n) 2>/dev/null | sed 1q`
"

_ACEOF

case $ac_config_files in *"
"*) set x $ac_config_files; shift; ac_config_files=$*;;
esac



cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
# Files that config.status was made for.
config_files="$ac_config_files"
config_commands="$ac_config_commands"

_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
ac_cs_usage="\
\`$as_me' instantiates files and other configuration actions
from templates according to the current configuration.  Unless the files
and actions are specified as TAGs, all are instantiated by default.

Usage: $0 [OPTION]... [TAG]...

  -h, --help       print this help, then exit
  -V, --version    print version number and configuration settings, then exit
      --config     print configuration, then exit
  -q, --quiet, --silent
                   do not print progress messages
  -d, --debug      don't remove temporary files
      --recheck    update $as_me by reconfiguring in the same conditions
      --file=FILE[:TEMPLATE]
                   instantiate the configuration file FILE

Configuration files:
$config_files

Configuration commands:
$config_commands

Report bugs to the package provider."

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
dbif config.status 1.2
configured by $0, generated by GNU Autoconf 2.69,
  with options \\"\$ac_cs_config\\"

Copyright (C) 2012 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."

ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
test -n "\$AWK" || AWK=awk
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# The default lists apply if the user does not specify any file.
ac_need_defaults=:
while test $# != 0
do
  case $1 in
  --*=?*)
    ac_option=`expr "X$1" : 'X\([^=]*\)='`
    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
    ac_shift=:
    ;;
  --*=)
    ac_option=`expr "X$1" : 'X\([^=]*\)='`
    ac_optarg=
    ac_shift=:
    ;;
  *)
    ac_option=$1
    ac_optarg=$2
    ac_shift=shift
    ;;
  esac

  case $ac_option in
  # Handling of the options.
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    ac_cs_recheck=: ;;
  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
    $as_echo "$ac_cs_version"; exit ;;
  --config | --confi | --conf | --con | --co | --c )
    $as_echo "$ac_cs_config"; exit ;;
  --debug | --debu | --deb | --de | --d | -d )
    debug=: ;;
  --file | --fil | --fi | --f )
    $ac_shift
    case $ac_optarg in
    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
    '') as_fn_error $? "missing file argument" ;;
    esac
    as_fn_append CONFIG_FILES " '$ac_optarg'"
    ac_need_defaults=false;;
  --he | --h |  --help | --hel | -h )
    $as_echo "$ac_cs_usage"; exit ;;
  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil | --si | --s)
    ac_cs_silent=: ;;

  # This is an error.
  -*) as_fn_error $? "unrecognized option: \`$1'
Try \`$0 --help' for more information." ;;

  *) as_fn_append ac_config_targets " $1"
     ac_need_defaults=false ;;

  esac
  shift
done

ac_configure_extra_args=

if $ac_cs_silent; then
  exec 6>/dev/null
  ac_configure_extra_args="$ac_configure_extra_args --silent"
fi

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
  shift
  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
  CONFIG_SHELL='$SHELL'
  export CONFIG_SHELL
  exec "\$@"
fi

_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
exec 5>>config.log
{
  echo
  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
  $as_echo "$ac_log"
} >&5

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1

# Handling of arguments.
for ac_config_target in $ac_config_targets
do
  case $ac_config_target in
    "doc") CONFIG_COMMANDS="$CONFIG_COMMANDS doc" ;;
    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;

  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
  esac
done


# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used.  Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi

# Have a temporary directory for convenience.  Make it in the build tree
# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Hook for its removal unless debugging.
# Note that there is a small window in which the directory will not be cleaned:
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
  tmp= ac_tmp=
  trap 'exit_status=$?
  : "${ac_tmp:=$tmp}"
  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
' 0
  trap 'as_fn_exit 1' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.

{
  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
  test -d "$tmp"
}  ||
{
  tmp=./conf$$-$RANDOM
  (umask 077 && mkdir "$tmp")
} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
ac_tmp=$tmp

# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
# This happens for instance with `./config.status config.h'.
if test -n "$CONFIG_FILES"; then


ac_cr=`echo X | tr X '\015'`
# On cygwin, bash can eat \r inside `` if the user requested igncr.
# But we know of no other shell where ac_cr would be empty at this
# point, so we can use a bashism as a fallback.
if test "x$ac_cr" = x; then
  eval ac_cr=\$\'\\r\'
fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
  ac_cs_awk_cr='\\r'
else
  ac_cs_awk_cr=$ac_cr
fi

echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
_ACEOF


{
  echo "cat >conf$$subs.awk <<_ACEOF" &&
  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
  echo "_ACEOF"
} >conf$$subs.sh ||
  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
  . ./conf$$subs.sh ||
    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5

  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
  if test $ac_delim_n = $ac_delim_num; then
    break
  elif $ac_last_try; then
    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
  else
    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
  fi
done
rm -f conf$$subs.sh

cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
_ACEOF
sed -n '
h
s/^/S["/; s/!.*/"]=/
p
g
s/^[^!]*!//
:repl
t repl
s/'"$ac_delim"'$//
t delim
:nl
h
s/\(.\{148\}\)..*/\1/
t more1
s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
p
n
b repl
:more1
s/["\\]/\\&/g; s/^/"/; s/$/"\\/
p
g
s/.\{148\}//
t nl
:delim
h
s/\(.\{148\}\)..*/\1/
t more2
s/["\\]/\\&/g; s/^/"/; s/$/"/
p
b
:more2
s/["\\]/\\&/g; s/^/"/; s/$/"\\/
p
g
s/.\{148\}//
t delim
' <conf$$subs.awk | sed '
/^[^""]/{
  N
  s/\n//
}
' >>$CONFIG_STATUS || ac_write_fail=1
rm -f conf$$subs.awk
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
_ACAWK
cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
  for (key in S) S_is_set[key] = 1
  FS = ""

}
{
  line = $ 0
  nfields = split(line, field, "@")
  substed = 0
  len = length(field[1])
  for (i = 2; i < nfields; i++) {
    key = field[i]
    keylen = length(key)
    if (S_is_set[key]) {
      value = S[key]
      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
      len += length(value) + length(field[++i])
      substed = 1
    } else
      len += 1 + keylen
  }

  print line
}

_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
else
  cat
fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
_ACEOF

# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
h
s///
s/^/:/
s/[	 ]*$/:/
s/:\$(srcdir):/:/g
s/:\${srcdir}:/:/g
s/:@srcdir@:/:/g
s/^:*//
s/:*$//
x
s/\(=[	 ]*\).*/\1/
G
s/\n//
s/^[^=]*=[	 ]*$//
}'
fi

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
fi # test -n "$CONFIG_FILES"


eval set X "  :F $CONFIG_FILES      :C $CONFIG_COMMANDS"
shift
for ac_tag
do
  case $ac_tag in
  :[FHLC]) ac_mode=$ac_tag; continue;;
  esac
  case $ac_mode$ac_tag in
  :[FHL]*:*);;
  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
  :[FH]-) ac_tag=-:-;;
  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
  esac
  ac_save_IFS=$IFS
  IFS=:
  set x $ac_tag
  IFS=$ac_save_IFS
  shift
  ac_file=$1
  shift

  case $ac_mode in
  :L) ac_source=$1;;
  :[FH])
    ac_file_inputs=
    for ac_f
    do
      case $ac_f in
      -) ac_f="$ac_tmp/stdin";;
      *) # Look for the file first in the build tree, then in the source tree
	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
	 # because $ac_f cannot contain `:'.
	 test -f "$ac_f" ||
	   case $ac_f in
	   [\\/$]*) false;;
	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
	   esac ||
	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
      esac
      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
      as_fn_append ac_file_inputs " '$ac_f'"
    done

    # Let's still pretend it is `configure' which instantiates (i.e., don't
    # use $as_me), people would be surprised to read:
    #    /* config.h.  Generated by config.status.  */
    configure_input='Generated from '`
	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
	`' by configure.'
    if test x"$ac_file" != x-; then
      configure_input="$ac_file.  $configure_input"
      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
$as_echo "$as_me: creating $ac_file" >&6;}
    fi
    # Neutralize special characters interpreted by sed in replacement strings.
    case $configure_input in #(
    *\&* | *\|* | *\\* )
       ac_sed_conf_input=`$as_echo "$configure_input" |
       sed 's/[\\\\&|]/\\\\&/g'`;; #(
    *) ac_sed_conf_input=$configure_input;;
    esac

    case $ac_tag in
    *:-:* | *:-) cat >"$ac_tmp/stdin" \
      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
    esac
    ;;
  esac

  ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_file" : 'X\(//\)[^/]' \| \
	 X"$ac_file" : 'X\(//\)$' \| \
	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
  as_dir="$ac_dir"; as_fn_mkdir_p
  ac_builddir=.

case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
  # A ".." for each directory in $ac_dir_suffix.
  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
  case $ac_top_builddir_sub in
  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
  esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix

case $srcdir in
  .)  # We are building in place.
    ac_srcdir=.
    ac_top_srcdir=$ac_top_builddir_sub
    ac_abs_top_srcdir=$ac_pwd ;;
  [\\/]* | ?:[\\/]* )  # Absolute name.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir
    ac_abs_top_srcdir=$srcdir ;;
  *) # Relative name.
    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_build_prefix$srcdir
    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix


  case $ac_mode in
  :F)
  #
  # CONFIG_FILE
  #

  case $INSTALL in
  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
  esac
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
ac_sed_dataroot='
/datarootdir/ {
  p
  q
}
/@datadir@/p
/@docdir@/p
/@infodir@/p
/@localedir@/p
/@mandir@/p'
case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
  ac_datarootdir_hack='
  s&@datadir@&$datadir&g
  s&@docdir@&$docdir&g
  s&@infodir@&$infodir&g
  s&@localedir@&$localedir&g
  s&@mandir@&$mandir&g
  s&\\\${datarootdir}&$datarootdir&g' ;;
esac
_ACEOF

# Neutralize VPATH when `$srcdir' = `.'.
# Shell code in configure.ac might set extrasub.
# FIXME: do we really want to maintain this feature?
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_sed_extra="$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s|@configure_input@|$ac_sed_conf_input|;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
s&@top_build_prefix@&$ac_top_build_prefix&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5

test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
      "$ac_tmp/out"`; test -z "$ac_out"; } &&
  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined" >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined" >&2;}

  rm -f "$ac_tmp/stdin"
  case $ac_file in
  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
  esac \
  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
 ;;


  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
$as_echo "$as_me: executing $ac_file commands" >&6;}
 ;;
  esac


  case $ac_file$ac_mode in
    "doc":C) as_dir=doc; as_fn_mkdir_p ;;

  esac
done # for ac_tag


as_fn_exit 0
_ACEOF
ac_clean_files=$ac_clean_files_save

test $ac_write_fail = 0 ||
  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5


# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded.  So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status.  When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
  ac_cs_success=:
  ac_config_status_args=
  test "$silent" = yes &&
    ac_config_status_args="$ac_config_status_args --quiet"
  exec 5>/dev/null
  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
  exec 5>>config.log
  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
  # would make configure fail if this is the last instruction.
  $ac_cs_success || as_fn_exit 1
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
fi

#!/bin/bash -norc
dnl	This file is an input file used by the GNU "autoconf" program to
dnl	generate the file "configure", which is run during Tcl installation
dnl	to configure the system for the local environment.

#-----------------------------------------------------------------------
# Sample configure.ac for Tcl Extensions.  The only places you should
# need to modify this file are marked by the string __CHANGE__
#-----------------------------------------------------------------------

#-----------------------------------------------------------------------
# __CHANGE__
# Set your package name and version numbers here.
#
# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION
# set as provided.  These will also be added as -D defs in your Makefile
# so you can encode the package version directly into the source files.
# This will also define a special symbol for Windows (BUILD_<PACKAGE_NAME>
# so that we create the export library with the dll.
#-----------------------------------------------------------------------

AC_INIT([dbif], [1.2])

#--------------------------------------------------------------------
# Call TEA_INIT as the first TEA_ macro to set up initial vars.
# This will define a ${TEA_PLATFORM} variable == "unix" or "windows"
# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE.
#--------------------------------------------------------------------

TEA_INIT([3.9])

AC_CONFIG_AUX_DIR(tclconfig)

#--------------------------------------------------------------------
# Load the tclConfig.sh file
#--------------------------------------------------------------------

TEA_PATH_TCLCONFIG
TEA_LOAD_TCLCONFIG

#--------------------------------------------------------------------
# Load the tkConfig.sh file if necessary (Tk extension)
#--------------------------------------------------------------------

#TEA_PATH_TKCONFIG
#TEA_LOAD_TKCONFIG

#-----------------------------------------------------------------------
# Handle the --prefix=... option by defaulting to what Tcl gave.
# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER.
#-----------------------------------------------------------------------

TEA_PREFIX

#-----------------------------------------------------------------------
# Allow the user to influence the location where the module will be
# installed by passing moduledir=path to configure.
# The default path for moduledir is ${libdir}/tcl8/tcl8.5
#-----------------------------------------------------------------------

TEA_MODULEDIR

#-----------------------------------------------------------------------
# Standard compiler checks.
# This sets up CC by using the CC env var, or looks for gcc otherwise.
# This also calls AC_PROG_CC and a few others to create the basic setup
# necessary to compile executables.
#-----------------------------------------------------------------------

#TEA_SETUP_COMPILER
AC_PROG_INSTALL

#-----------------------------------------------------------------------
# __CHANGE__
# Specify the C source files to compile in TEA_ADD_SOURCES,
# public headers that need to be installed in TEA_ADD_HEADERS,
# stub library C source files to compile in TEA_ADD_STUB_SOURCES,
# and runtime Tcl library files in TEA_ADD_TCL_SOURCES.
# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS
# and PKG_TCL_SOURCES.
#-----------------------------------------------------------------------

TEA_ADD_SOURCES([])
TEA_ADD_HEADERS([])
TEA_ADD_INCLUDES([])
TEA_ADD_LIBS([])
TEA_ADD_CFLAGS([])
TEA_ADD_STUB_SOURCES([])
TEA_ADD_TCL_SOURCES([dbif.tcl])

#--------------------------------------------------------------------
# __CHANGE__
#
# You can add more files to clean if your extension creates any extra
# files by extending CLEANFILES.
# Add pkgIndex.tcl if it is generated in the Makefile instead of ./configure
# and change Makefile.in to move it from CONFIG_CLEAN_FILES to BINARIES var.
#
# A few miscellaneous platform-specific items:
# TEA_ADD_* any platform specific compiler/build info here.
#--------------------------------------------------------------------

#CLEANFILES="$CLEANFILES pkgIndex.tcl"
if test "${TEA_PLATFORM}" = "windows" ; then
    # Ensure no empty if clauses
    :
    #TEA_ADD_SOURCES([win/winFile.c])
    #TEA_ADD_INCLUDES([-I\"$(${CYGPATH} ${srcdir}/win)\"])
else
    # Ensure no empty else clauses
    :
    #TEA_ADD_SOURCES([unix/unixFile.c])
    #TEA_ADD_LIBS([-lsuperfly])
fi

#--------------------------------------------------------------------
# __CHANGE__
# Choose which headers you need.  Extension authors should try very
# hard to only rely on the Tcl public header files.  Internal headers
# contain private data structures and are subject to change without
# notice.
# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG
#--------------------------------------------------------------------

#TEA_PUBLIC_TCL_HEADERS
#TEA_PRIVATE_TCL_HEADERS

#TEA_PUBLIC_TK_HEADERS
#TEA_PRIVATE_TK_HEADERS
#TEA_PATH_X

#--------------------------------------------------------------------
# Check whether --enable-threads or --disable-threads was given.
# This auto-enables if Tcl was compiled threaded.
#--------------------------------------------------------------------

#TEA_ENABLE_THREADS

#--------------------------------------------------------------------
# The statement below defines a collection of symbols related to
# building as a shared library instead of a static library.
#--------------------------------------------------------------------

#TEA_ENABLE_SHARED

#--------------------------------------------------------------------
# This macro figures out what flags to use with the compiler/linker
# when building shared/static debug/optimized objects.  This information
# can be taken from the tclConfig.sh file, but this figures it all out.
#--------------------------------------------------------------------

#TEA_CONFIG_CFLAGS

#--------------------------------------------------------------------
# Set the default compiler switches based on the --enable-symbols option.
#--------------------------------------------------------------------

#TEA_ENABLE_SYMBOLS

#--------------------------------------------------------------------
# Everyone should be linking against the Tcl stub library.  If you
# can't for some reason, remove this definition.  If you aren't using
# stubs, you also need to modify the SHLIB_LD_LIBS setting below to
# link against the non-stubbed Tcl library.  Add Tk too if necessary.
#--------------------------------------------------------------------

#AC_DEFINE(USE_TCL_STUBS, 1, [Use Tcl stubs])
#AC_DEFINE(USE_TK_STUBS, 1, [Use Tk stubs])

#--------------------------------------------------------------------
# This macro generates a line to use when building a library.  It
# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS,
# and TEA_LOAD_TCLCONFIG macros above.
#--------------------------------------------------------------------

#TEA_MAKE_LIB

#--------------------------------------------------------------------
# Determine the name of the tclsh and/or wish executables in the
# Tcl and Tk build directories or the location they were installed
# into. These paths are used to support running test cases only,
# the Makefile should not be making use of these paths to generate
# a pkgIndex.tcl file or anything else at extension build time.
#--------------------------------------------------------------------

TEA_PROG_TCLSH
#TEA_PROG_WISH

AC_PATH_PROG([DTPLITE_PROG], [dtplite])
AC_SUBST([INSTALLDOC], [install-doc])
if test "x${DTPLITE_PROG}" = "x" ; then
    AC_MSG_WARN([Doctools not found. Documentation will not be generated.])
    AC_SUBST([DTPLITE_PROG], [@:])
    INSTALLDOC=""
fi

# Create the doc directory in the build environment vor building docs

AC_CONFIG_COMMANDS([doc], [AS_MKDIR_P([doc])])

#--------------------------------------------------------------------
# Finally, substitute all of the various values into the Makefile.
# You may alternatively have a special pkgIndex.tcl.in or other files
# which require substituting th AC variables in.  Include these here.
#--------------------------------------------------------------------

AC_OUTPUT([Makefile])

#------------------------------------------------------------------------
# TEA_MODULEDIR --
#
#	Determine the location where Tcl modules should be installed
#
# Arguments:
#	none
#
# Results:
#	Defines the following vars:
#		moduledir	Directory where Tcl modules will be
#				installed.
#
#	Sets the following vars:
#		moduledir	Directory path
#------------------------------------------------------------------------

AC_DEFUN([TEA_MODULEDIR], [
    AC_ARG_VAR(moduledir, [directory in which to install Tcl modules])
    if test "${ac_cv_env_moduledir_set}x" = "x"; then
	moduledir='${libdir}/tcl8/8.6'
    fi
])

# The DBus interface package provides functions that make it easy to
# provide a number of standard DBus interfaces in a Tcl application.
#
# The following interfaces are supported:
#	org.freedesktop.DBus.Peer
#	org.freedesktop.DBus.Introspectable
#	org.freedesktop.DBus.Properties

package require dbus 2.1
package provide dbif 1.2
package provide dbus-intf 1.2

namespace eval dbus::dbif {
    # Setup some defaults in case the user doesn't specify certain options
    variable defaults [dict create bus session intf com.tclcode.default]

    # Store a copy of the message info of the last received message so it
    # won't be necessary to pass it around all the time
    variable info

    # Information about the available methods, signals and properties is
    # stored in an array of dicts
    variable dbif

    # Information about listeners is stored in a separate array to be able
    # to keep the introspection code simpler
    variable hear

    # Information about signals is stored for easy access by ID
    variable signal

    # Automatically emit a PropertiesChanged signal when properties change
    variable trace 1
    # PropertiesChanged signal definition to be reused for every path/intf
    set signal(PropertiesChanged) {
	bus ""
	path ""
	interface org.freedesktop.DBus.Properties
	name PropertiesChanged
	signature sa{sv}as
	command ::dbus::dbif::propchanged
	interp {}
	meta {}
	args {
	    interface_name s
	    changed_properties a{sv}
	    invalidated_properties as
	}
    }

    # Various counters for generating unique IDs
    variable msgid 0 sigid 0

    # Expiry time for messages waiting for a response
    variable timeout 25000

    # Create the dbif ensemble command
    namespace ensemble create -command ::dbif -subcommands {
	default connect method signal property generate listen \
	  return error get delete
    } -map {return {respond return} error {respond error}}
}

########################################################################
# Helper procedures
########################################################################

# Procedure for returning error messages to the caller
#
proc dbus::dbif::dbuserr {type bus args} {
    upvar #1 data data
    if {[dict get $data noreply]} {return -level [info level] -async 1}
    set error org.freedesktop.DBus.Error.Failed
    switch -- $type {
	path {
	    lassign $args path
	    set msg "No such object path '$path'"
	    set error org.freedesktop.DBus.Error.UnknownObject
	}
	member {
	    lassign $args path intf member sig
	    set msg "No such method '$member' in interface '$intf'\
	      at object path '$path' (signature '$sig')"
	    set error org.freedesktop.DBus.Error.UnknownMethod
	}
	interface {
	    lassign $args path intf
	    set msg "No such interface '$intf' at object path '$path'"
	    set error org.freedesktop.DBus.Error.UnknownInterface
	}
	property {
	    lassign $args path intf name
	    set msg "No such property '$name' in interface '$intf'\
	      at object path '$path'"
	    set error org.freedesktop.DBus.Error.InvalidArgs
	}
	propunset {
	    lassign $args path intf name
	    set msg "Property '$name' in interface '$intf'\
	      at object path '$path' has currently no value"
	    set error org.freedesktop.DBus.Error.NoValue
	}
	signature {
	    lassign $args path intf name sig exp
	    set msg "Signature '$sig' does not match for property '$name'\
	      in interface '$intf' at object path '$path' (expected '$exp')"
	    set error org.freedesktop.DBus.Error.SignatureMismatch
	}
	access {
	    lassign $args path intf name op
	    set msg "Property '$name' in interface '$intf'\
	      at object path '$path' does not allow $op access"
	    set error org.freedesktop.DBus.Error.AccessViolation
	}
	default {
	    set msg "Invalid $type"
	}
    }
    dbus error $bus -name $error \
      [dict get $data sender] [dict get $data serial] $msg
    return -level [info level] -async 1
}

# Make sure a new interface on a path has all the necessary parts so it
# doesn't need to be checked every time.
#
proc dbus::dbif::create {bus path intf} {
    variable dbif
    if {![info exists dbif($bus,$path,$intf)]} {
	set dbif($bus,$path,$intf) \
	  [dict create methods {} signals {} properties {}]
    }
}

# Parse a DBus method or signal argument specification list
#
proc dbus::dbif::args {list {thing Argument}} {
    set signature {}
    set args {}
    foreach n $list {
	lassign [split $n :] arg sig
	namecheck $arg $thing
	if {$sig eq ""} {set sig s}
	lappend args $arg $sig
	append signature $sig
    }
    return [dict create signature $signature args $args]
}

# Define a method that can be called over the DBus
#
proc dbus::dbif::define {bus path intf name cmd int {in {}} {out {}} {meta {}} {async 0}} {
    variable dbif
    create $bus $path $intf
    set args [args $in]
    dict update args signature sig args inargs {}
    set args [args $out]
    dict update args signature ret args outargs {}
    set dict [dict create command $cmd interp $int signature $ret \
      in $inargs out $outargs meta $meta async $async]
    dict set dbif($bus,$path,$intf) methods $name,$sig $dict
}

# Release the information stored for a message
#
proc dbus::dbif::expire {id} {
    variable info
    if {[info exists info($id)]} {
	after cancel [dict get $info($id) afterid]
	unset info($id)
    }
}

# Parse a dbif command line with options, required, and optional arguments
#
proc dbus::dbif::cmdline {optvar argvar argspec arglist body} {
    upvar 1 $optvar option $argvar value
    foreach {opt cmd} $body {
	switch -glob -- $opt {
	    -*: {set arg([string range $opt 0 end-1]) $opt}
	    -* {set arg($opt) $opt}
	}
    }
    while {[llength $arglist]} {
	set rest [lassign $arglist opt]
	if {$opt eq "-" || [string index $opt 0] ne "-"} break
	if {$opt eq "--"} {set arglist $rest; break}
	if {[info exists arg($opt)]} {
	    set option $opt
	} elseif {[llength [set match [array names arg $opt*]]] == 1} {
	    set option [lindex $match 0]
       	} else {
   	    # Unknown or ambiguous option
	    error "Unknown or ambiguous option: \"$opt\""
	}
	if {$arg($option) ne $option} {
	    if {[llength $rest]} {
		set rest [lassign $rest value]
	    } else {
		error "Option requires argument: \"$opt\""
	    }
	}
	uplevel 1 [list switch -- $arg($option) $body]
	set arglist $rest
    }
    if {[lindex $argspec end] eq "args"} {
    	set len [expr {[llength $argspec] - 1}]
	uplevel 1 [list set args [lrange $arglist $len end]]
	incr len -1
	set argspec [lrange $argspec 0 $len]
	set arglist [lrange $arglist 0 $len]
    }
    set miss [expr {[llength $argspec] - [llength $arglist]}]
    set opt 0
    if {$miss > 0} {
	foreach n $argspec {if {[llength $n] == 2} {incr opt}}
    }
    if {$miss > $opt || $miss < 0} {
	set cmdline [dict get [info frame -2] cmd]
	set cmd [lrange $cmdline \
	  0 [expr {[llength $cmdline] - [llength [info level -1]]}]]
	append cmd " ?options?"
	foreach n $argspec {
	    if {[llength $n] == 2} {
		append cmd " ?[lindex $n 0]?"
	    } else {
		append cmd " $n"
	    }
	}
	error [format {wrong # args: should be "%s"} $cmd]
    }
    foreach a $argspec {
	upvar 1 [lindex $a 0] var
	if {[llength $a] == 2} {
	    if {$miss > 0 && $opt <= $miss} {
		set var [lindex $a 1]
		continue
	    }
	    incr opt -1
	}
	set arglist [lassign $arglist var]
    }
}

# Get the namespace of the caller
#
proc dbus::dbif::getns {interp} {
    if {$interp eq ""} {
	# This is a helper procedure. So 1 level up is the actual procedure
	# We need to go 2 levels up for the caller of the actual procedure
	return [uplevel 2 [list namespace current]]
    } else {
	# If the command is in another interpreter, we probably arived here
	# through an interp alias. In that case the calling context of that
	# interp is accessible via interp eval
	return [interp eval $interp [list namespace current]]
    }
}

# Access the miscellaneous information of a message
#
proc dbus::dbif::get {id name} {
    variable info
    if {![info exists info($id)]} {
	error "MessageID does not exist: \"$id\""
    }
    if {![dict exists $info($id) $name]} {
	set list [lsort [dict keys $info($id)]]
	lset list end "or [lindex $list end]"
	error "Unknown property: \"$name\". Must be [join $list ", "]"
    }
    return [dict get $info($id) $name]
}

proc dbus::dbif::namecheck {name {thing Name}} {
    if {[string is wordchar -strict $name]} {return name}
    error "$thing contains invalid characters: \"$name\""
}

proc dbus::dbif::buscheck {name} {
    if {$name in {session system starter}} {return $name}
    if {[regexp {^[a-z]+:([0-9A-Za-z_/.\\,=-]|%[0-9a-fA-F]{2})+$} $name]} {
	set spec [lassign [split $name :,] transport]
	if {[lsearch -not $spec *=*] < 0 && [lsearch $spec *=*=*] < 0} {
	    return $name
	}
    }
    error "Invalid bus: \"$name\"."
}

proc dbus::dbif::pathcheck {name} {
    if {[dbus validate path $name]} {return $name}
    error "Invalid path name: \"$name\"."
}

proc dbus::dbif::intfcheck {name} {
    if {[dbus validate interface $name]} {return $name}
    error "Invalid interface name: \"$name\"."
}

proc dbus::dbif::accesscheck {name} {
    if {$name in {read write readwrite}} {return $name}
    error "Invalid access mode: \"$name\". Must be: read, write, or readwrite"
}

proc dbus::dbif::metacheck {data} {
    if {[string is list $data] && ([llength $data] % 2) == 0} {
	# Convert to a dict, removing duplicates (or should they be allowed?)
	return [dict merge {} $data]
    }
    error "Invalid attribute specification. Must be a dict"
}

proc dbus::dbif::async {opts} {
    return [expr {[dict exists $opts -async] && \
      [string is true -strict [dict get $opts -async]]}]
}

proc dbus::dbif::vartrace {op bus path intf name} {
    variable dbif; variable trace
    dict with dbif($bus,$path,$intf) properties $name {
	if {[dict exists $meta Property.EmitsChangedSignal]} {
	    set ecs [dict get $meta Property.EmitsChangedSignal]
	} else {
	    set ecs true
	}
	if {$op eq "add"} {
	    if {!$trace} return
	    if {$access ni {read readwrite}} return
	    if {$ecs ni {true invalidates}} return
	}
	set inv [expr {$ecs eq "invalidates"}]
	set trc [list dbus::dbif::propchg $bus $path $intf $name $inv]
	set cmd [list trace $op variable $variable {write unset} $trc]
	interp eval $interp [list uplevel #0 $cmd]
    }
    return
}

# Needs to be exposed via the regular API?
proc dbus::dbif::changedsignal {state} {
    variable trace
    if {!$state == !$trace} return
    set trace [expr {!!$state}]
    set op [lindex {remove add} $trace]
    variable dbif
    foreach n [array names dbif] {
	lassign [split $n ,] bus path intf
	foreach name [dict keys [dict get $dbif($n) properties]] {
	    vartrace $op $bus $path $intf $name
	}
    }
}

# Determine the number of arguments from signatures
proc dbus::dbif::argcount {argspec} {
    set cnt 0
    dict for {name sig} $argspec {
	if {![dbus validate signature $sig]} {return -1}
	while {$sig ne ""} {
	    switch [string index $sig 0] {
		s - b - y - n - q - i - u - x - t - d - g - o {
		    set sig [string range $sig 1 end]
		}
		a {
		    set sig [string range $sig 1 end]
		    continue
		}
		( {
		    set x 0
		    while {$x >= 0} {
			set x [string first ) $sig [incr x]]
			set str [string range $sig 0 $x]
			if {[dbus validate signature $str]} break
		    }
		    set sig [string range $sig [incr x] end]
		}
		\{ {
		    set x 0
		    while {$x >= 0} {
			set x [string first \} $sig [incr x]]
			set str [string range $sig 0 $x]
			if {[dbus validate signature a$str]} break
		    }
		    set sig [string range $sig [incr x] end]
		}
	    }
	    incr cnt
	}
    }
    return $cnt
}

########################################################################
# Ensemble subcommands
########################################################################

# Select which DBus to use (session or system)
#
proc dbus::dbif::default {args} {
    variable defaults
    set opts $defaults
    cmdline opt arg {} $args {
	-bus: {dict set opts bus [buscheck $arg]}
	-interface: {dict set opts intf [intfcheck $arg]}
    }
    set defaults $opts
    # Return the current values
    return [dict create \
      -bus [dict get $opts bus] -interface [dict get $opts intf]]
}

# Connect to the DBus, optionally requesting one or more names to be assigned
# to the current application
#
proc dbus::dbif::connect {args} {
    variable defaults
    set bus [dict get $defaults bus]; set opts {}
    cmdline opt arg args $args {
	-bus: {set bus [buscheck $arg]}
	-yield - -replace - -noqueue {lappend opts $opt}
    }
    dbus connect $bus
    set rc {}; foreach name $args {
    	if {![catch {dbus name $bus {*}$opts $name}]} {
	    lappend rc $name
	}
    }
    if {[dict get $defaults intf] eq "com.tclcode.default" && [llength $args]} {
	dict set defaults intf [lindex $args 0]
	# Path of least surprise. If no defaults have been set up, users will
	# probably expect the bus used for connecting will be the default
	dict set defaults bus $bus
    }
    dbus method $bus {} org.freedesktop.DBus.Peer.Ping dbus::dbif::ping
    dbus method $bus {} org.freedesktop.DBus.Peer.GetMachineId \
      [list dbus::dbif::machineid $bus]
    dbus method $bus {} org.freedesktop.DBus.Introspectable.Introspect \
      [list dbus::dbif::introspect $bus]
    dbus method $bus -details {} org.freedesktop.DBus.Properties.Set \
      [list dbus::dbif::propset $bus]
    dbus method $bus {} org.freedesktop.DBus.Properties.Get \
      [list dbus::dbif::propget $bus]
    dbus method $bus {} org.freedesktop.DBus.Properties.GetAll \
      [list dbus::dbif::propdump $bus]
    # Add the standard interfaces to the API specification
    standard $bus
    return $rc
}

# Define a signal that the application may send
#
proc dbus::dbif::signal {args} {
    variable defaults; variable dbif; variable signal; variable sigid
    dict with defaults {}; set meta {}
    set id ""
    cmdline opt arg {path name {in {}} {opt {}} {arglist {}} {body {}}} $args {
	-id: {set id $arg}
	-bus: {set bus [buscheck $arg]}
	-interface: {set intf [intfcheck $arg]}
	-attributes: {set meta [metacheck $arg]}
    }
    if {$body eq ""} {
	set body $arglist
	set arglist $opt
	set interp ""
    } else {
	set interp $opt
    }
    namecheck $name
    # Signals without a predefined path need a body to provide the path
    if {$path ne "" || $body eq ""} {pathcheck $path}
    create $bus $path $intf
    if {$id eq ""} {set id signal[incr sigid]}
    set dict [dict create \
      bus $bus path $path interface $intf name $name command "" interp $interp]
    if {$body ne ""} {
	set ns [getns $interp]
	dict set dict command [list apply [list $arglist $body $ns]]
    }
    if {[info exists signal($id)]} {
	# Clean up the old signal
	dict update signal($id) bus obus path opath interface ointf {}
	if {$obus eq ""} {
	    # Internal signal present on all buses
	    if {$id eq "PropertiesChanged"} {
		# Stop automatic signalling of changed properties
		changedsignal 0
		# The code may have messed with the path
		set opath ""
	    }
	    set old [array names dbif *,$opath,$ointf]
	} else {
	    set old [list $obus,$opath,$ointf]
	}
	foreach o $old {
	    set sigs [dict get $dbif($o) signals]
    	    dict set dbif($o) signals \
	      [lsearch -all -inline -exact -not $sigs $id]
	}
    }
    set signal($id) [dict merge $dict [args $in] [dict create meta $meta]]
    dict lappend dbif($bus,$path,$intf) signals $id
    return $id
}

# Define a property that may be accessed through the DBus
#
proc dbus::dbif::property {args} {
    variable defaults; variable dbif
    dict with defaults {}; set op readwrite; set meta {}
    cmdline opt arg {path name var args} $args {
	-bus: {set bus [buscheck $arg]}
	-interface: {set intf [intfcheck $arg]}
	-access: {set op [accesscheck $arg]}
	-attributes: {set meta [metacheck $arg]}
    }
    if {[llength $args] <= 2} {
	lassign [lreverse $args] body interp
    } else {
	set cmd {dbif property ?options? path name var ?interp ?body??}
	error [format {wrong # args: should be "%s"} $cmd]
    }
    set args [args [list $name] Property]
    set name [lindex [dict get $args args] 0]
    set sig [lindex [dict get $args signature] 0]
    create $bus $path $intf

    # Remove any old trace
    if {[dict exists $dbif($bus,$path,$intf) properties $name]} {
	vartrace remove $bus $path $intf $name
    }

    if {$body ne ""} {
	set ns [getns $interp]
	set cmd [list apply [list $name $body $ns]]
    } else {
	set cmd ""
    }
    set dict [dict create variable $var access $op signature $sig \
      command $cmd interp $interp meta $meta]
    dict set dbif($bus,$path,$intf) properties $name $dict

    # Setup a variable trace for readable properties
    vartrace add $bus $path $intf $name
    if {$interp ne {}} {
	interp alias $interp ::dbus::dbif::propchg {} ::dbus::dbif::propchg
    }
}

# Define how to handle a method call
#
proc dbus::dbif::method {args} {
    variable defaults
    dict with defaults {}; set meta {}; set async 0
    cmdline opt arg {path cmd {in ""} {out ""} {interp ""} body} $args {
        -bus: {set bus [buscheck $arg]}
        -interface: {set intf [intfcheck $arg]}
	-attributes: {set meta [metacheck $arg]}
	-async {set async 1}
    }
    namecheck $cmd
    set args {}
    set info {{}}
    foreach n $in {
	if {[llength $n] == 2 || [llength $info] > 1} {
	    lassign $n arg default
	    lassign [split $arg :] name sig
	    lappend args [list $name $default]
	    lappend info [linsert [lindex $info end] end $arg]
	} else {
	    lassign [split $n :] name sig
	    lappend args $name
	    lset info 0 [linsert [lindex $info 0] end $n]
	}
    }
    set ns [getns $interp]
    set code [list apply [list [linsert $args 0 msgid] $body $ns]]
    foreach n $info {
	define $bus $path $intf $cmd $code $interp $n $out $meta $async
    }
    dbus method $bus $path $intf.$cmd [list dbus::dbif::methods $bus]
}

# Generate a signal according to an earlier specification
#
proc dbus::dbif::generate {id args} {
    variable signal
    if {![info exists signal($id)]} {
	error "Signal '$id' has not been defined"
    }
    set cmd [dict get $signal($id) command]
    set int [dict get $signal($id) interp]
    if {$cmd eq ""} {
    	set argv $args
	dict with signal($id) {}
    } else {
	# Need to use catch to get the additional return options
	if {[catch {interp eval $int [list uplevel #0 $cmd $args]} argv opts]} {
	    # Rethrow any exceptions
	    return -options $opts $argv
	}
	dict with signal($id) {}
	if {$path eq ""} {
	    # Standard signal, body code must have provided the path
	    if {[dict exists $opts -path]} {
		set path [pathcheck [dict get $opts -path]]
	    } else {
		error "No path specified for the signal"
	    }
	}
	# Don't expect the body to provide a list for single arg signals
	if {[argcount $args] == 1} {set argv [list $argv]}
    }
    dbus signal $bus -signature $signature \
      $path $interface $name {*}$argv
}

# Setup a signal handler for a specific signal
#
proc dbus::dbif::listen {args} {
    variable defaults; variable hear
    dict with defaults {}
    cmdline opt arg {path name {arglist ""} {interp ""} body} $args {
        -bus: {set bus [buscheck $arg]}
        -interface: {set intf [intfcheck $arg]}
    }
    dbus filter $bus add \
      -type signal -path $path -interface $intf -member $name
    set args {}
    set info {{}}
    foreach n $arglist {
	if {[llength $n] == 2 || [llength $info] > 1} {
	    lassign $n arg default
	    lassign [split $arg :] var sig
	    if {$sig eq ""} {set sig s}
	    lappend args [list $var $default]
	    lappend info [lindex $info end]$sig
	} else {
	    lassign [split $n :] var sig
	    if {$sig eq ""} {set sig s}
	    lappend args $var
	    lset info 0 [lindex $info 0]$sig
	}
    }
    set ns [getns $interp]
    set code [list apply [list [linsert $args 0 msgid] $body $ns]]
    foreach n $info {
    	set dict [dict create command $code interp $interp]
    	dict set hear($bus,$path,$intf) $name,$n $dict
    }
    dbus listen $bus $path $intf.$name [list dbus::dbif::signals $bus]
}

# Send a response to a DBus message
#
proc dbus::dbif::respond {response id result {name ""}} {
    variable info
    if {![info exists info($id)]} {
	error "Message ID $id does not exist"
    }
    dict with info($id) {}
    expire $id
    if {$noreply} return
    dict with resp {
	if {$response eq "error"} {
	    if {$name eq ""} {
		dbus error $bus $sender $serial $result
	    } else {
		dbus error $bus -name $name $sender $serial $result
	    }
	} elseif {[llength $out] == 2} {
    	    # The returned result was a single value, not a list
	    dbus return $bus -signature $signature $sender $serial $result
	} else {
	    if {[llength $out] == 0} {set result ""}
	    dbus return $bus -signature $signature $sender $serial {*}$result
	}
    }
}

# Remove a path from the published DBus interface
#
proc dbus::dbif::delete {args} {
    variable defaults; variable dbif; variable signal
    dict with defaults {}
    cmdline opt arg {path} $args {
	-bus: {set bus [buscheck $arg]}
	-interface: {set intf [intfcheck $arg]}
    }
    pathcheck $path
    if {$path eq "/"} {set pat /*} else {set pat $path/*}
    set paths [array names dbif $bus,$pat,$intf]
    if {[info exists dbif($bus,$path,$intf)]} {lappend paths $bus,$path,$intf}
    foreach n $paths {
	foreach sig [dict get $dbif($n) signals] {
	    unset -nocomplain signal($sig)
	}
	unset dbif($n)
    }
}

########################################################################
# Property access
########################################################################

# Handle a property set request
#
proc dbus::dbif::propset {bus data intf name arg} {
    variable dbif; variable info
    set path [dict get $data path]
    if {![info exists dbif($bus,$path,$intf)]} {
    	dbuserr interface $bus $path $intf
    }
    if {![dict exists $dbif($bus,$path,$intf) properties $name]} {
    	dbuserr property $bus $path $intf $name
    }
    set dict [dict get $dbif($bus,$path,$intf) properties $name]
    dict with dict {
	if {$access ni {write readwrite}} {
    	    dbuserr access $bus $path $intf $name write
	}
	# Strip off the two string arguments for interface and name
	set sig [dict get $data signature]
	set sig [string range $sig 2 end]
       	if {$sig eq "v"} {
	    lassign $arg sig arg
	}
	if {$sig ne "v" && $sig ne $signature} {
	    dbuserr signature $bus $path $intf $name $sig $signature
    	}
	if {$command ne ""} {
	    # Failures will automatically be reported back to the caller
  	    interp eval $interp [list uplevel #0 [linsert $command end $arg]]
	}
	interp eval $interp [list uplevel #0 [list set $variable $arg]]
    }
    dict with data {
    	dbus return $bus $sender $serial
    }
    return -async 1
}

# Handle a property get request
#
proc dbus::dbif::propget {bus data intf name} {
    variable dbif; variable info
    set path [dict get $data path]
    if {![info exists dbif($bus,$path,$intf)]} {
	dbuserr interface $bus $path $intf
    }
    if {![dict exists $dbif($bus,$path,$intf) properties $name]} {
	dbuserr property $bus $path $intf $name
    }
    set op [dict get $dbif($bus,$path,$intf) properties $name access]
    if {$op ni {read readwrite}} {dbuserr access $bus $path $intf $name read}
    set interp [dict get $dbif($bus,$path,$intf) properties $name interp]
    set var [dict get $dbif($bus,$path,$intf) properties $name variable]
    if {[interp eval $interp [list uplevel #0 [list info exists $var]]]} {
	set sig [dict get $dbif($bus,$path,$intf) properties $name signature]
	set dest [dict get $data sender]
	set serial [dict get $data serial]
	set value [interp eval $interp [list uplevel #0 [list set $var]]]
	dbus return $bus -signature $sig $dest $serial $value
    } else {
	dbuserr propunset $bus $path $intf $name
    }
    return -async 1
}

# Handle a property getall request
#
proc dbus::dbif::propdump {bus data {intf ""} args} {
    variable dbif; variable info
    set path [dict get $data path]
    if {![info exists dbif($bus,$path,$intf)]} {
	dbuserr interface $bus $path $intf
    }
    if {![dict exists $dbif($bus,$path,$intf) properties]} {return {}}
    set rc {}
    dict for {n v} [dict get $dbif($bus,$path,$intf) properties] {
	set interp [dict get $v interp]
	set var [dict get $v variable]
	if {[interp eval $interp [list uplevel #0 [list info exists $var]]]} {
	    set sig [dict get $v signature]
	    set value [interp eval $interp [list uplevel #0 [list set $var]]]
	    lappend rc $n [list $sig $value]
	}
    }
    dict with data {
 	dbus return $bus -signature a{sv} $sender $serial $rc
    }
    return -async 1
}

# Track property changes
proc dbus::dbif::propchg {bus path intf prop inv name1 name2 op} {
    variable propchg
    if {$op eq "unset"} {
	# After an unset trace fires, the trace is removed
	vartrace add $bus $path $intf $prop
    }

    if {$inv} {set op invalid}
    dict set propchg $bus $path $intf $prop $op

    after cancel [namespace code propchgsignal]
    after idle [namespace code propchgsignal]
}

proc dbus::dbif::propchanged {path {intf ""} {bus ""}} {
    variable propchg
    if {$bus eq ""} {
	variable defaults
	set bus [dict get $defaults bus]
	if {$intf eq ""} {set intf [dict get $defaults intf]}
    }
    if {![dict exists $propchg $bus $path $intf]} {
	# Don't generate the signal
	return -code return
    }
    variable dbif
    set change {}
    set invalid {}
    dict for {key op} [dict get $propchg $bus $path $intf] {
	if {$op eq "write"} {
	    set info [dict get $dbif($bus,$path,$intf) properties $key]
	    dict with info {}
	    set value [interp eval $interp \
	      [list uplevel #0 [list set $variable]]]
	    dict set change $key [list $signature $value]
	} else {
	    lappend invalid $key
	}
    }
    dict unset propchg $bus $path $intf
    variable signal
    # Put the details into the signal (not the interface!)
    dict set signal(PropertiesChanged) bus $bus
    dict set signal(PropertiesChanged) path $path
    return [list $intf $change $invalid]
}

# Report changed properties
#
proc dbus::dbif::propchgsignal {} {
    variable propchg
    dict for {bus data} $propchg {
	dict for {path dict} $data {
	    dict for {intf chg} $dict {
		if {[dict size $chg] > 0} {
		    generate PropertiesChanged $path $intf $bus
		}
	    }
	}
    }
    # All changes have been reported
    set propchg {}
}

########################################################################
# Introspection procedures
########################################################################

proc dbus::dbif::node {bus path} {
    variable dbif
    set list [array names dbif $bus,$path,*]
    if {[llength $list] == 0} {
	if {$path eq "/"} {set pat /*} else {set pat $path/*}
	if {[llength [array names dbif $bus,$pat,*]] == 0} return
    }
    set rc {
	{<!DOCTYPE node PUBLIC\
	  "-//freedesktop//DTD D-BUS Object Introspection 1.0//EN"}
	{"http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd">}
    }
    lappend rc {<node>}
    set ilist {}
    foreach n $list {
	set i [lindex [split $n ,] 2]
	set dict $dbif($n)
	if {[info exists dbif($bus,,$i)]} {
	    dict with dict {
		set std $dbif($bus,,$i)
		set methods [dict merge [dict get $std methods] $methods]
		set properties \
		  [dict merge [dict get $std properties] $properties]
		foreach n [dict get $std signals] {
		    if {$n ni $signals} {lappend signals $n}
		}
	    }
	}
	lappend rc [interface $i $dict "  "]
	lappend ilist $i
    }
    foreach n [array names dbif $bus,,*] {
	set i [lindex [split $n ,] 2]
	if {$i ni $ilist} {
	    lappend rc [interface $i $dbif($n) "  "]
	}
    }
    set parent(/) {}
    foreach n [array names dbif $bus,$path*] {
	set p [lindex [split $n ,] 1]
	if {$p eq "/"} continue
	set dir /
	foreach d [lrange [split $p /] 1 end] {
	    lappend parent($dir) $d
	    if {$dir eq "/"} {set dir ""}
	    append dir / $d
	    lappend parent($dir)
	}
    }
    foreach n [lsort -unique $parent($path)] {
	lappend rc [format {  <node name="%s"/>} $n]
    }
    lappend rc {</node>} {}
    join $rc \n
}

proc dbus::dbif::interface {intf dict tab} {
    variable signal
    set rc [list [format {%s<interface name="%s">} $tab $intf]]
    if {[dict exists $dict methods]} {
	dict for {n v} [dict get $dict methods] {
	    lassign [split $n ,] name sig
	    lappend rc [format {%s  <method name="%s">} $tab $name]
	    foreach {arg sig} [dict get $dict methods $n in] {
    		lappend rc [format {%s    <arg name="%s" type="%s"\
		  direction="%s"/>} $tab $arg $sig in]
	    }
	    foreach {arg sig} [dict get $dict methods $n out] {
    		lappend rc [format {%s    <arg name="%s" type="%s"\
		  direction="%s"/>} $tab $arg $sig out]
	    }
	    foreach {key value} [dict get $dict methods $n meta] {
		lappend rc [format {%s    <annotation name="%s" value="%s"/>} \
		  $tab org.freedesktop.DBus.$key $value]
	    }
	    lappend rc [format {%s  </method>} $tab]
	}
    }
    if {[dict exists $dict signals]} {
	foreach n [dict get $dict signals] {
	    set name [dict get $signal($n) name]
	    lappend rc [format {%s  <signal name="%s">} $tab $name]
	    foreach {arg sig} [dict get $signal($n) args] {
    		lappend rc [format {%s    <arg name="%s" type="%s"/>} \
		  $tab $arg $sig]
	    }
	    foreach {key value} [dict get $signal($n) meta] {
		lappend rc [format {%s    <annotation name="%s" value="%s"/>} \
		  $tab org.freedesktop.DBus.$key $value]
	    }
	    lappend rc [format {%s  </signal>} $tab]
	}
    }
    if {[dict exists $dict properties]} {
	dict for {name v} [dict get $dict properties] {
	    dict with v {}
	    if {[dict size $meta] == 0} {
		lappend rc [format {%s  <property name="%s" type="%s"\
		  access="%s"/>} $tab $name $signature $access]
		continue
	    }
	    lappend rc [format {%s  <property name="%s" type="%s"\
	      access="%s">} $tab $name $signature $access]
	    foreach {key value} $meta {
		lappend rc [format {%s    <annotation name="%s" value="%s"/>} \
		  $tab org.freedesktop.DBus.$key $value]
	    }
	    lappend rc [format {%s  </property>} $tab]
	}
    }
    lappend rc [format {%s</interface>} $tab]
    return [join $rc \n]
}

proc dbus::dbif::standard {bus} {
    variable dbif
    variable trace
    set arg1 [dict create in {interface_name s property_name s} out {value v} meta {}]
    set arg2 [dict create in {interface_name s property_name s value v} out {} meta {}]
    set arg3 [dict create in {interface_name s} out {values a{sv}} meta {}]
    create $bus "" org.freedesktop.DBus.Properties
    dict set dbif($bus,,org.freedesktop.DBus.Properties) methods \
      [dict create Get,ss $arg1 Set,ssv $arg2 GetAll,sa{sv} $arg3]
    if {$trace} {
	dict set dbif($bus,,org.freedesktop.DBus.Properties) signals \
	  [list PropertiesChanged]
    }
    create $bus "" org.freedesktop.DBus.Introspectable
    dict set dbif($bus,,org.freedesktop.DBus.Introspectable) methods \
      [dict create Introspect, [dict create in {} out {xml_data s} meta {}]]
}

########################################################################
# DBus message handlers
########################################################################

# Handlers for processing received messages. This will automatically handle
# calls to methods of the supported standard interfaces. Calls to defined
# methods will be handed off to the associated code.
#
proc dbus::dbif::ping {data args} {
    return
}

proc dbus::dbif::machineid {bus data args} {
    return [dbus info $bus machineid]
}

proc dbus::dbif::introspect {bus data args} {
    return [node $bus [dict get $data path]]
}

proc dbus::dbif::methods {bus data args} {
    variable timeout; variable msgid; variable info; variable dbif
    dict with data {}
    if {![info exists dbif($bus,$path,$interface)]} {
	dbuserr interface $bus $path $interface
    }
    if {![dict exists $dbif($bus,$path,$interface) \
      methods $member,$signature]} {
	dbuserr member $bus $path $interface $member $signature
    }
    set dict [dict get $dbif($bus,$path,$interface) methods $member,$signature]

    set id message[incr msgid]
    # Allow 25 seconds for the application to provide a response
    set afterid [after $timeout [list dbus::dbif::expire $id]]
    set info($id) [dict merge $data [dict create bus $bus afterid $afterid]]
    # Store a copy of the information needed to provide a response. This
    # information would otherwise be lost if the code deletes its own path.
    dict set info($id) resp $dict
    dict with dict {
    	if {[catch {interp eval $interp \
	  [list uplevel #0 $command [linsert $args 0 $id]]} result opts]} {
	    respond error $id $result
	} elseif {$async || [async $opts]} {
    	    # Keep the message information around for a bit more
	} elseif {$noreply} {
	    expire $id
	} elseif {[info exists info($id)]} {
	    respond return $id $result
	}
    }
    return -async 1
}

proc dbus::dbif::signals {bus data args} {
    variable msgid; variable info; variable hear
    dict with data {}
    # Check that a handler was defined for the member/signature combination
    if {![dict exists $hear($bus,$path,$interface) $member,$signature]} return

    set id message[incr msgid]
    set info($id) [dict merge $data [dict create bus $bus afterid $id]]
    set dict [dict get $hear($bus,$path,$interface) $member,$signature]
    catch {
	dict with dict {
	    interp eval $interp [list uplevel #0 $command [linsert $args 0 $id]]
	}
    }
    # Clean up
    expire $id
}

[comment {-*- tcl -*- doctools manpage}]
[vset libname dbif]
[vset cmdname dbif]
[vset version 1.2]
[manpage_begin [vset libname] n [vset version]]
[copyright {2008-2015 Schelte Bron}]
[moddesc {Tcl D-Bus Interface}]
[titledesc {Application layer around the Tcl D-Bus library}]
[require Tcl 8.5]
[require dbus "2.1"]
[require [vset libname] [vset version]]
[description]

The [package [vset libname]] package provides a higher level wrapper around
the low-level D-Bus commands provided by the dbus package. The package also
provides an implementation of a number of standard D-Bus interfaces.
See [sectref "STANDARD INTERFACES"] for more information.

[para]

Access to all functions of the [package [vset libname]] package from within
a Tcl program is done using the [cmd [vset cmdname]] command. The command
supports several subcommands that determine what action is carried out.

[list_begin definitions]
[call [cmd [vset cmdname]] [method connect] \
  [opt "[option -bus] [arg bustype]"] [opt [option -noqueue]] \
  [opt [option -replace]] [opt [option -yield]] [opt "[arg name] ..."]]

Connect to a message bus and optionally request the D-Bus server to assign
one or more names to the current application.

[para]

The [option -yield] option specifies that the application will release the
requested name when some other application requests the same name and has
indicated that it wants to take over ownership of the name. The application
will be informed by a [emph NameLost] signal when it loses ownership of the
name.

[para]

The [option -replace] option indicates that the application wants to take
over the ownership of the name from the application that is currently the
primary owner, if any. This request will only be honoured if the current
owner has indicated that it will release the name on request. See also the
[option -yield] option.

[para]

If the requested name is currently in use and the -replace option has not
been specified, or the [option -replace] option was specified but the
current owner is unwilling to give up its ownership, the name request will
normally be queued. Then when the name is released by the current owner it
is assigned to the next requester in the queue and a signal is sent to
inform that requester that it is now the primary owner of the name. The
[option -noqueue] option may be specified to indicate that the name request
should not be queued.

[para]

The command returns a list of names that have successfully been acquired.

[para]

The following code can be used to allow a new instance of a program to 
replace the current one. This can be useful during program development:
[example_begin]
dbif connect -yield -replace $dbusname
dbif listen -interface [lb]dbus info service[rb] \
  [lb]dbus info path[rb] NameLost name {if {$name eq $::dbusname} exit}
[example_end]

[call [cmd [vset cmdname]] [method default] \
  [opt "[option -bus] [arg bustype]"] \
  [opt "[option -interface] [arg interface]"]]

Generally an application will perform several [cmd [vset cmdname]] commands
related to the same message bus and interface. To avoid having to pass the
same values for the [option -bus] and [option -interface] options with all
those commands, their defaults can be setup with the [cmd [vset cmdname]]
[method default] subcommand.

[para]

An interface name must consist of at least two elements separated by
a period ('.') character. Each element may only contain the characters
"[lb]A-Z[rb][lb]a-z[rb][lb]0-9[rb]_" and must not begin with a digit.

[para]

The initial value for [option -bus] is session. The initial value for
[option -interface] is taken from the first name requested for the
application in a [cmd [vset cmdname]] [method connect] command. If no
name was ever requested with the connect subcommand, it defaults to
"com.tclcode.default".

[call [cmd [vset cmdname]] [method delete] \
  [opt "[option -bus] [arg bustype]"] \
  [opt "[option -interface] [arg interface]"] [arg path]]

While there currently is no way to remove individual signals, methods, or
properties from the published interface, this subcommand allows the removal
of a complete node.

[call [cmd [vset cmdname]] [method error] [arg messageID] \
  [arg errormessage] [opt [arg errorname]]]

Send a D-Bus error message in response to a D-Bus method call. If the
[arg errorname] argument is not specified, it defaults to
"org.freedesktop.DBus.Error.Failed".

[call [cmd [vset cmdname]] [method generate] \
  [arg signalID] [opt "[arg arg] ..."]]

Generate a signal as defined by a previous [cmd [vset cmdname]] 
[method signal] command. If a body was specified with the signal definition,
the provided arguments must match the args definition for the body. Otherwise
they must match the arglist specified during the definition of the signal.

[call [cmd [vset cmdname]] [method get] [arg messageID] [arg name]]

Access additional information about a D-Bus message. Recognized names are
[arg bus], [arg member], [arg interface], [arg path], [arg sender],
[arg destination], [arg messagetype], [arg signature], [arg serial],
[arg replyserial], [arg noreply], [arg autostart], and [arg errorname].

[call [cmd [vset cmdname]] [method listen] \
  [opt "[option -bus] [arg bustype]"] \
  [opt "[option -interface] [arg interface]"] \
  [arg path] [arg name] [opt [arg arglist]] [opt [arg interp]] [arg body]]

Start listening for the specified signal and execute [arg body] when such a
signal appears on the D-Bus.

[para]

The code in [arg body] will be executed in the namespace the
[cmd [vset cmdname]] [method listen] command was issued from.

The [arg arglist] argument follows the special rules for [vset cmdname]
argument lists. See [sectref "ARGUMENT LISTS"] below for more information.

[call [cmd [vset cmdname]] [method method] \
  [opt "[option -attributes] [arg attributes]"] \
  [opt "[option -bus] [arg bustype]"] \
  [opt "[option -interface] [arg interface]"] \
  [arg path] [arg name] \
  [opt "[arg inputargs] [opt [arg outputargs]]"] [opt [arg interp]] [arg body]]

Define a method that may be accessed through the D-Bus and execute [arg body]
when the method is invoked. 
In addition to valid dbus paths, an empty string may be specified for the
[arg path] argument. This makes the method available on all paths.
The [arg inputargs] argument specifies which arguments must be provided by
the caller. The [arg outputargs] argument indicates the type of result the
method returns.

[para]

Attributes may be specified via the [option -attributes] option to provide
hints to users of your API.
See [sectref ATTRIBUTES] below for more information.

[para]

The return value resulting from executing the body will normally be returned
to the caller in a D-Bus return message. If an uncaught error occurs or the
result of body doesn't match [arg outputargs], an error message will be
returned to the caller instead.

[para]

The body code recognizes an additional [option -async] option for the Tcl
[cmd return] command. When that option is specified with a true boolean
value ([const true], [const yes], [const 1]), the return value from the body
will not automatically be returned to the caller. A response message should
then be generated using the [cmd [vset cmdname]] [method return] or
[cmd [vset cmdname]] [method error] subcommands.

[para]

An additional variable [var msgid] will be passed to the method body. This
variable contains a messageID that may be used in combination with the
[method get], [method return], or [method error] subcommands. The messageID
remains valid for a period of time (default 25 seconds), or until a response
has been returned to the caller, whichever happens first.

[para]

The code in [arg body] will be executed in the namespace the
[cmd [vset cmdname]] [method method] command was issued from.

The [arg inputargs] and [arg outputargs] arguments follow the special rules
for [vset cmdname] argument lists.
See [sectref "ARGUMENT LISTS"] below for more information.

[call [cmd [vset cmdname]] [method property] \
  [opt "[option -access] [arg mode]"] \
  [opt "[option -attributes] [arg attributes]"] \
  [opt "[option -bus] [arg bustype]"] \
  [opt "[option -interface] [arg interface]"] \
  [arg path] [arg name]?:[arg signature]? [arg variable] \
  [opt "[opt [arg interp]] [arg body]"]]

Define a property that may be accessed through the D-Bus using methods defined 
by the org.freedesktop.DBus.Properties standard interface. The [arg variable]
argument defines the global variable holding the value of the property.

[para]

The [option -access] option specifies whether the property can be viewed
and/or modified through the D-Bus. Valid access modes are [const read],
[const write], and [const readwrite]. If no access mode is specified, it
defaults to readwrite.

[para]

Attributes may be specified via the [option -attributes] option to provide
hints to users of your API.
See [sectref ATTRIBUTES] below for more information.

[para]

The code in the optional [arg body] argument will be executed when the
property is modified through the D-Bus. During the execution of [arg body]
the global variable will still have its original value, if any. The new
value for the property is passed to the script as an argument with the same
name as the property. If execution of [arg body] results in an error, the
global variable will not be modified. This allows restrictions to be imposed
on the value for the property.

[para]

The code in [arg body] will be executed in the namespace the
[cmd [vset cmdname]] [method property] command was issued from or, if a slave
interpreter was specified, in the current namespace of that slave interpreter
at definition time.

[para]

Generating the property value only when needed can be implemented by putting
a read trace on the global variable. Example:
[example_begin]
dbif property -attributes {Property.EmitsChangedSignal false} / clock sec
trace add variable sec read {apply {args {set ::sec [lb]clock seconds[rb]}}}
[example_end]

In this example the Property.EmitsChangedSignal attribute is used to
prevent the [emph PropertiesChanged] signal being generated, which would
involve a second read of the variable.

[call [cmd [vset cmdname]] [method return] [arg messageID] \
  [arg returnvalue]]

Send a D-Bus return message in response to a D-Bus method call. The provided
[arg returnvalue] must match the signature specified earlier in the
[cmd [vset cmdname]] [method method] command for the method.

[call [cmd [vset cmdname]] [method signal] \
  [opt "[option -attributes] [arg attributes]"] \
  [opt "[option -bus] [arg bustype]"] \
  [opt "[option -id] [arg signalID]"] \
  [opt "[option -interface] [arg interface]"] \
  [arg path] [arg name] \
  [opt "[arg arglist] [opt "[opt [arg interp]] [arg args] [arg body]"]"]]

Define a signal that the application may emit using the [cmd [vset cmdname]]
[method generate] subcommand. Signals are referred to by their SignalID.
If [option -id] is specified, it is used as the SignalID. Otherwise a new
unique identifier is generated. Specifying an existing SignalID replaces
the previously defined signal.

[para]

Attributes may be specified via the [option -attributes] option to provide
hints to users of your API.
See [sectref ATTRIBUTES] below for more information.

[para]

The command returns the SignalID of the newly created signal.

[para]

If the optional [arg args] and [arg body] arguments are specified, body
will be executed when the signal is transmitted on the D-Bus as a result
of the [cmd [vset cmdname]] [method generate] subcommand. It is the
responsibility of the body code to produce a return value that matches
the specified arglist.

[para]

The code in [arg body] will be executed in the namespace the
[cmd [vset cmdname]] [method signal] command was issued from.

If any uncaught error happens during the execution of the body code, the
[cmd [vset cmdname]] [method generate] command will also throw an error with
the same error message. 

When the body code comes to the conclusion that the signal doesn't need to
be sent after all, it may abort the operation by returning using
[lb]return -code return[rb].

The [arg arglist] argument follows the special rules for [vset cmdname]
argument lists. See [sectref "ARGUMENT LISTS"] below for more information.

[para]

In addition to valid dbus paths, an empty string may be specified for the
[arg path] argument. This makes the signal available on all paths. In this
case a body must be provided and the body code must provide a path in the
[option -path] option to the [cmd return] command.
For example: The following helper proc could be used to allow providing a
path to the [cmd [vset cmdname]] [method generate] command in front of the
signal arguments:
[example_begin]
proc stdsignal {path args} {
    # Single argument signal bodies are not expected to produce a list
    if {[lb]llength $args[rb] == 1} {set args [lb]lindex $args 0[rb]}
    return -path $path $args
}
[example_end]

[list_end]

[section "VALID NAMES"]

The [vset libname] package enforces some limitations on names used with the
[cmd [vset cmdname]] subcommands. All names must only use the characters
"[lb]A-Z[rb][lb]a-z[rb][lb]0-9[rb]_". This limitation applies to method
names, property names, signal names, and argument names. Out of this group,
only argument names may begin with a digit.

[para]

Interface names and error names must consist of at least two elements
separated by a period ('.') character. Each element must only contain the
characters "[lb]A-Z[rb][lb]a-z[rb][lb]0-9[rb]_" and must not begin with a
digit.

[para]

D-Bus names for applications must follow the same rules as interface names,
except that also dash ('-') characters are allowed. Unique D-Bus names begin
with a colon (':'). The elements of unique D-Bus names are allowed to begin
with a digit.

[para]

Paths must start with a slash ('/') and must consist of elements separated
by slash characters. Each element must only contain the characters
"[lb]A-Z[rb][lb]a-z[rb][lb]0-9[rb]_". Empty elements are not allowed.

[section "ARGUMENT LISTS"]
Due to the fact that the D-Bus specification works with typed arguments, a
slightly modified method for specifying argument lists has been adopted for
the [vset libname] package. The normal Tcl argument list as used with the
[cmd proc] and [cmd apply] commands may still be used. In that case all
arguments will be of the string type. To specify a different type, the
variable name must be followed by a colon and the D-Bus signature
specification for that argument. Example: to define the count argument as
a 32-bit integer, it should be specified as count:i.

[para]

The following argument types are available:
[list_begin definitions]
[def s] A UTF-8 encoded, nul-terminated Unicode string.
[def b] A boolean, FALSE (0), or TRUE (1).
[def y] A byte (8-bit unsigned integer).
[def n] A 16-bit signed integer.
[def q] A 16-bit unsigned integer.
[def i] A 32-bit signed integer.
[def u] A 32-bit unsigned integer.
[def x] A 64-bit signed integer.
[def t] A 64-bit unsigned integer.
[def d] An 8-byte double in IEEE 754 format.
[def g] A type signature.
[def o] An object path.
[def a#] A D-Bus array type, which is similar to a Tcl list. The # specifies
the type of the array elements. This can be any type, including another
array, a struct or a dict entry.
[def v] A D-Bus variant type. Specifying this type will cause the code to
automatically determine the type of the provided value (by looking at the
internal representation).
[def (...)] A struct. The string inside the parentheses defines the types of
the arguments within the struct, which may consist of a combination of any
of the existing types.
[def {{##}}] A dict entry. Dict entries may only occur as array elements. The
first # specifies the type of the dict key. This must be a basic type
(one of 'sbynqiuxtdgo'). The second # specifies the type of the dict value.
This can again be any existing type.
[list_end]

[para]

Argument lists may contain optional arguments. The use of optional arguments
will result in multiple prototypes being reported for the object when
introspected. The special meaning of the [const args] argument does not
translate well in the D-Bus concept. For that reason using [arg args] as the
last argument of an argument list should be avoided.

[section "STANDARD INTERFACES"]

A number of standard interfaces have been defined in the D-Bus specification
that may be useful across various D-Bus applications.

[subsection org.freedesktop.DBus.Peer]
[list_begin definitions]
[def [emph org.freedesktop.DBus.Peer.Ping]]
Returns an empty response.

[def [emph org.freedesktop.DBus.Peer.GetMachineId]]
Returns a hex-encoded UUID representing the identity of the machine the
application is running on.
[list_end]

[subsection org.freedesktop.DBus.Introspectable]
[list_begin definitions]
[def [emph org.freedesktop.DBus.Introspectable.Introspect]]
Returns an XML description of the D-Bus structure, including its interfaces
(with signals and methods), objects below it in the object path tree, and
its properties.
[list_end]

[subsection org.freedesktop.DBus.Properties]
[list_begin definitions]
[def [emph org.freedesktop.DBus.Properties.Get]]
Returns the value of the specified property. Only valid for properties with
read or readwrite access.
[def [emph org.freedesktop.DBus.Properties.Set]]
Changes the value of the specified property. Only valid for properties with
write or readwrite access.
[def [emph org.freedesktop.DBus.Properties.GetAll]]
Returns a dict of all properties with read or readwrite access.
[def [emph org.freedesktop.DBus.Properties.PropertiesChanged]]
This signal is emitted when one or more properties change.
The behavior for individual properties may be influenced by their
Property.EmitsChangedSignal attribute. See [sectref ATTRIBUTES] below.

[para]

All applicable property changes are collected and reported via a single
[emph PropertiesChanged] signal per path/interface/bus combination when the
application enters the idle loop. The signal may also be generated on demand
via the command: 
[list_begin definitions]
[list_begin definitions]
[def "[cmd [vset cmdname]] [method generate] PropertiesChanged\
[arg path] [opt [arg interface]] [opt [arg bus]]"]
[list_end]
[list_end]

[para]

The functionality for automatically populating this signal is implemented
via variable traces. If this feature is not needed, you can avoid the
associated overhead by redefining the PropertiesChanged signal id to your
own version.
To completely get rid of the signal, you can use the following code snippet
before defining any other part of your dbus interface:
[example_begin]
package require dbif
dbif signal -id PropertiesChanged / foobar
dbif delete /
[example_end]

[list_end]

[section "ATTRIBUTES"]
Attributes may be specified as a list of key/value pairs for methods,
signals, and properties. These attributes are reported via annotations in
the XML description obtained via an [emph Introspect] method call.
Annotations may be used to provide hints to users of your API.

[para]

Some well-know attributes are (default, if any, shown in italics):
[list_begin definitions]
[def Description]
Provide a short 1-line description of the method, signal or property.
[def Deprecated]
Indicate that this method is deprecated (true, [emph false]).
[def Method.NoReply]
This method may not produce a reply (true, [emph false]). For example if you
provide a method to exit your application.
[def Method.Error]
This method may throw the indicated Exception in addition to the standard
ones.
[def Property.EmitsChangedSignal]
Indicates whether a change to the property is reported via the 
[emph PropertiesChanged] signal ([emph true], false, invalidates, const).
[para]
The value of this attribute, if specified, is also used internally to
influence the automatic generation of the [emph PropertiesChanged] signal.
[list_begin definitions]
[def true]
The signal is emitted with the value included. This is the default.
[def false]
The signal is not automatically emitted on a change.
Parties interested in the property should obtain it every time they need it.
The application code may still emit a [emph PropertiesChanged] signal
whenever desired.
This may be used for properties that are implemented with a read trace on
the global variable.
[def invalidates]
The signal is emitted but the value is not included in the signal. This may
be useful for properties that change much more frequently than they are
expected to be queried, and/or have large values.
[def const]
The property never changes its value during the lifetime of the object it
belongs to, and hence the signal is never emitted for it. 
[list_end]
[list_end]

[manpage_end]

#!/usr/bin/wish

package require dbif

# Create a very simple GUI
button .b -textvariable text
pack .b -padx 20 -pady 20

# Connect to the session message bus and steal the com.tclcode.hello name
# away from any other application that may currently have it.
#
dbif connect -replace -yield com.tclcode.hello

# Setup an event handler for the case that some other application takes away
# the com.tclcode.hello name
#
dbif listen -interface org.freedesktop.DBus \
  /org/freedesktop/DBus NameLost name {
    global sig
    dbif generate $sig "Goodbye cruel world!"
    exit
}

# Provide a number of methods for other applications to invoke
#
dbif method /Counter Set {{num:i 0}} {global counter; set counter $num}
dbif method / GetConfiguration {} data:aas {.b configure}
# Send a response before quitting to keep the caller happy
dbif method / Quit {dbif return $msgid {};exit}

# Define a couple of properties that can be remotely accessed
#
dbif property / Message text
dbif property -access read /Counter Value:i counter
dbif property / BackgroundColor color(bg) {.b configure -background BackgroundColor}
dbif property / ForegroundColor color(fg) {.b configure -foreground ForegroundColor}

# Initialize the variables that hold the properties
set color(bg) [.b cget -background]
set color(fg) [.b cget -foreground]
set text "Hello World!"
set counter 0

# Define the signals that the application may emit
set sig [dbif signal / Goodbye str]
# Attach a signal directly to the command for the button
.b configure -command [list count [dbif signal / Hello str {} {.b cget -text}]]

proc count {sig} {
    global counter
    incr counter
    dbif generate $sig
}

Copyright (c) 2008-2009, Schelte Bron <sbron@users.sourceforge.net>

Permission to use, copy, modify, and/or distribute this software for any
purpose with or without fee is hereby granted, provided that the above
copyright notice and this permission notice appear in all copies.

THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

#
# Tcl package index file
#
package ifneeded @PACKAGE_NAME@ @PACKAGE_VERSION@ \
    [list source [file join $dir @PACKAGE_NAME@.tcl]]
package ifneeded dbus-intf @PACKAGE_VERSION@ \
    [list source [file join $dir @PACKAGE_NAME@.tcl]]

2008-12-21  Jan Nijtmans  <nijtmans@users.sf.net>

	* tcl.m4: [Bug 2073255] Tcl_GetString(NULL) doesn't crash on HP-UX
	          (this bug report was for Tcl, but holds for TEA as well.)

2008-12-20  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4: sync with tdbc tcl.m4 changes
	(SunOS-5.11): Sun cc SHLIB_LD: use LDFLAGS_DEFAULT instead of LDFLAGS

2008-12-02  Jeff Hobbs  <jeffh@ActiveState.com>

	*** Bump to TEA_VERSION 3.7 ***

	* tcl.m4: in private header check, check for <plat>Port.h instead
	of Int.h to ensure all private headers are available.

2008-11-04  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (Darwin): sync TEA_PRIVATE_TK_HEADERS handling of
	Tk.framework PrivateHeaders with TEA_PRIVATE_TCL_HEADERS.

2008-11-04  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_PATH_TCLCONFIG, TEA_PATH_TKCONFIG): exit with error
	when tclConfig.sh cannot be found. [Bug #1997760]
	(TEA_PRIVATE_TCL_HEADERS, TEA_PRIVATE_TK_HEADERS): allow for
	finding the headers installed in the public areas, e.g. a result of
	make install-private-headers. [Bug #1631922]

2008-08-12  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (Darwin): link shlib with current and compatiblity version
	flags; look for libX11.dylib when searching for X11 libraries.

2008-06-12  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (SunOS-5.11): fix 64bit amd64 support with gcc & Sun cc.

2008-03-27  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (SunOS-5.1x): fix 64bit support for Sun cc. [Bug 1921166]

2008-02-01  Donal K. Fellows  <donal.k.fellows@man.ac.uk>

	* tcl.m4 (TEA_CONFIG_CFLAGS): Updated to work at least in part with
	more modern VC versions. Currently just made the linker flags more
	flexible; more work may be needed.

2007-10-26  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (Darwin): add support for 64-bit X11.

2007-10-23  Jeff Hobbs  <jeffh@ActiveState.com>

	*** Tagged tea-3-branch to start TEA 4 development on HEAD ***

2007-09-17  Joe English  <jenglish@users.sourceforge.net>

	* tcl.m4: use '${CC} -shared' instead of 'ld -Bshareable' 
	to build shared libraries on current NetBSDs [Bug 1749251].

2007-09-15  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4: 	replace all direct references to compiler by ${CC} to
			enable CC overriding at configure & make time.
	(SunOS-5.1x):	replace direct use of '/usr/ccs/bin/ld' in SHLIB_LD by
			'cc' compiler driver.

2007-08-08  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: check Ttk dir for Tk private headers (8.5).
	Add some comments to other bits.

2007-06-25  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_PROG_TCLSH, TEA_PROG_WISH): move where / is added.

2007-06-13  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: fix --with-tkinclude alignment. [Bug 1506111]

2007-06-06  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (Darwin): fix 64bit arch removal in fat 32&64bit builds. 

2007-05-18  Donal K. Fellows  <donal.k.fellows@man.ac.uk>

	* tcl.m4: Added quoting so that paths with spaces cause fewer
	problems.

2007-03-07  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (Darwin): s/CFLAGS/CPPFLAGS/ in -mmacosx-version-min check.

2007-02-15  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: correct private header check to search in generic subdir

2007-02-09  Jeff Hobbs  <jeffh@ActiveState.com>

	*** Bump to TEA_VERSION 3.6 ***

	* tcl.m4: correct -d to -f
	(TEA_CONFIG_CFLAGS): SHLIB_SUFFIX is .so on HP ia64 [Bug 1615058]
	
2007-02-08  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_PRIVATE_TCL_HEADERS, TEA_PRIVATE_TK_HEADERS): check
	that the dirs actually have private headers. [Bug 1631922]

2007-02-04  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4: add caching to -pipe check.

2007-01-25  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4: integrate CPPFLAGS into CFLAGS as late as possible and 
	move (rather than duplicate) -isysroot flags from CFLAGS to CPPFLAGS to
	avoid errors about multiple -isysroot flags from some older gcc builds.

2006-01-19  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4: ensure CPPFLAGS env var is used when set. [Bug 1586861]
	(Darwin): add -isysroot and -mmacosx-version-min flags to CPPFLAGS when
	present in CFLAGS to avoid discrepancies between what headers configure
	sees during preprocessing tests and compiling tests.

2006-12-19  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (Darwin): --enable-64bit: verify linking with 64bit -arch flag
	succeeds before enabling 64bit build.

2006-12-16  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (Linux): fix previous change to use makefile variable
	LDFLAGS_DEFAULT instead of LDFLAGS in SHLIB_LD, to ensure linker
	flags in sampleextension Makefile are picked up.

2006-11-26  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (Linux): --enable-64bit support. [Patch 1597389], [Bug 1230558]

2006-08-18  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (Darwin): add support for --enable-64bit on x86_64, for
	universal builds including x86_64 and for use of -mmacosx-version-min
	instead of MACOSX_DEPLOYMENT_TARGET. For Tk extensions, remove 64-bit
	arch flags from CFLAGS like in the Tk configure, as neither TkAqua nor
	TkX11 can be built for 64-bit at present.

2006-03-28  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: []-quote AC_DEFUN functions.
	(TEA_PATH_TKCONFIG): Fixed Windows-specific check for tkConfig.sh.
	(TEA_MAKE_LIB): Prepend 'lib' for Windows-gcc configs.

2006-03-07  Joe English  <jenglish@users.sourceforge.net>

	* tcl.m4: Set SHLIB_LD_FLAGS='${LIBS}' on NetBSD,
	as per the other *BSD variants [Bug 1334613].

2006-01-25  Jeff Hobbs  <jeffh@ActiveState.com>

	*** Bump to TEA version 3.5 ***

	* tcl.m4: keep LD_SEARCH_FLAGS and CC_SEARCH_FLAGS synchronous
	with core tcl.m4 meaning.

2006-01-24  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (Darwin): use makefile variable LDFLAGS_DEFAULT instead of
	LDFLAGS in SHLIB_LD, to ensure linker flags in sampleextension Makefile
	are picked up. [Bug 1403343]

2006-01-23  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: add C:/Tcl/lib and C:/Progra~1/Tcl/lib dirs to check for
	*Config.sh on Windows. [Bug 1407544]

2006-01-23  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (Darwin): for Tk extensions, remove -arch ppc64 from CFLAGS
	like in the Tk configure, as neither TkAqua nor TkX11 can be built for
	64bit at present (no 64bit GUI libraries).

2006-01-22  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: restore system=windows on Windows.
	Remove error if 'ar' isn't found (it may not be on Windows).
	Do not add -lxnet or define _XOPEN_SOURCE on HP-UX by default.
	Ensure the C|LDFLAGS_DEFAULT gets the fully sub'd value at
	configure time.

2006-01-10  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4: add caching, use AC_CACHE_CHECK instead of AC_CACHE_VAL
	where possible, consistent message quoting, sync relevant
	tcl/unix/tcl.m4 HEAD changes and gratuitous formatting differences
	(notably sunc removal of support for for ancient BSD's, IRIX 4,
	RISCos and Ultrix by kennykb), Darwin improvements to
	TEA_LOAD_*CONFIG to make linking work against Tcl/Tk frameworks
	installed in arbitrary location, change TEA_PROG_* search order
	(look in *_BIN_DIR parents before *_PREFIX).

2006-01-05  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: add dkf's system config refactor

2006-01-04  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: remove extraneous ' that causes bash 3.1 to choke

2005-12-19  Joe English  <jenglish@users.sourceforge.net>

	* tcl.m4 (TEA_PATH_TCLCONFIG &c): Look for tclConfig.sh &c 
	in ${libdir}, where they are installed by default [Patch #1377407].

2005-12-05  Don Porter  <dgp@users.sf.net>

	* tcl.m4 (TEA_PUBLIC_*_HEADERS):	Better support for finding
	header files for uninstalled Tcl and Tk.

2005-12-02  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: correctly bump TEA_VERSION var to 3.4

2005-12-01  Daniel Steffen  <das@users.sourceforge.net>

	* unix/tcl.m4 (Darwin): fixed error when MACOSX_DEPLOYMENT_TARGET unset

2005-11-29  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4:  *** Bump to TEA version 3.4 ***
	Add Windows x64 build support.
	Remove TEA_PATH_NOSPACE and handle the problem with ""s where
	necessary - the macro relied on TCLSH_PROG which didn't work for
	cross-compiles.

2005-11-27  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (Darwin): add 64bit support, add CFLAGS to SHLIB_LD to
	support passing -isysroot in env(CFLAGS) to configure (flag can't
	be present twice, so can't be in both CFLAGS and LDFLAGS during
	configure), don't use -prebind when deploying on 10.4.
	(TEA_ENABLE_LANGINFO, TEA_TIME_HANDLER): add/fix caching.

2005-10-30  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4: fixed two tests for TEA_WINDOWINGSYSTEM = "aqua" that
	should have been for `uname -s` = "Darwin" instead; added some
	missing quoting.
	(TEA_PROG_TCLSH, TEA_PROG_WISH): fix incorrect assumption that
	install location of tclConfig.sh/tkConfig.sh allows to determine
	the tclsh/wish install dir via ../bin. Indeed tcl/tk can be
	configured with arbitrary --libdir and --bindir (independent of
	prefix) and such a configuration is in fact standard with Darwin
	framework builds. At least now also check ${TCL_PREFIX}/bin
	resp. ${TK_PREFIX}/bin for presence of tclsh resp. wish (if tcl/tk
	have been configured with arbitrary --bindir, this will still not
	find them, for a general solution *Config.sh would need to contain
	the values of bindir/libdir/includedir passed to configure).

2005-10-07  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: Fix Solaris 5.10 check and Solaris AMD64 64-bit builds.

2005-10-04  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_PRIVATE_TCL_HEADERS): add / to finish sed macro
	(TEA_ENABLE_THREADS): don't check for pthread_attr_setstacksize func

2005-09-13  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: *** Update to TEA version 3.3 ***
	define TEA_WINDOWINGSYSTEM in TEA_LOAD_TKCONFIG.
	Make --enable-threads the default (users can --disable-threads).
	Improve AIX ${CC}_r fix to better check existing ${CC} value.
	Do the appropriate evals to not require the *TOP_DIR_NATIVE vars
	be set for extensions that use private headers.
	Make aqua check for Xlib compat headers the same as win32.

2005-07-26  Mo DeJong  <mdejong@users.sourceforge.net>

	* tcl.m4 (TEA_PROG_TCLSH, TEA_BUILD_TCLSH,
	TEA_PROG_WISH, TEA_BUILD_WISH): Remove
	TEA_BUILD_TCLSH and TEA_BUILD_WISH because
	of complaints that it broke the build when
	only an installed version of Tcl was available
	at extension build time. The TEA_PROG_TCLSH and
	TEA_PROG_WISH macros will no longer search the
	path at all. The build tclsh or installed
	tclsh shell will now be found by TEA_PROG_TCLSH.

2005-07-24  Mo DeJong  <mdejong@users.sourceforge.net>

	* tcl.m4 (TEA_PROG_TCLSH, TEA_BUILD_TCLSH,
	TEA_PROG_WISH, TEA_BUILD_WISH):
	Split confused search for tclsh on PATH and
	build and install locations into two macros.
	TEA_PROG_TCLSH and TEA_PROG_WISH search the
	system PATH for an installed tclsh or wish.
	The TEA_BUILD_TCLSH and TEA_BUILD_WISH
	macros determine the name of tclsh or
	wish in the Tcl or Tk build directory even
	if tclsh or wish has not yet been built.
	[Tcl bug 1160114]
	[Tcl patch 1244153]

2005-06-23  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (TEA_PRIVATE_TK_HEADERS): add ${TK_SRC_DIR}/macosx to
	TK_INCLUDES when building against TkAqua.

	* tcl.m4 (TEA_PATH_X): fixed missing comma in AC_DEFINE

	* tcl.m4: changes to better support framework builds of Tcl and Tk out
	of the box: search framework install locations for *Config.sh, and if in
	presence of a framework build, use the framework's Headers and
	PrivateHeaders directories for public and private includes. [FR 947735]

2005-06-18  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (Darwin): add -headerpad_max_install_names to LDFLAGS to
	ensure we can always relocate binaries with install_name_tool.

2005-06-04  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (TEA_PATH_X): for TEA_WINDOWINGSYSTEM == aqua, check if xlib
	compat headers are available in tkheaders location, otherwise add xlib
	sourcedir to TK_XINCLUDES.

2005-04-25  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4: added AC_DEFINE* descriptions (from core tcl.m4) to allow
	use with autoheader.
	(Darwin): added configure checks for recently added linker flags
	-single_module and -search_paths_first to allow building with older
	tools (and on Mac OS X 10.1), use -single_module in SHLIB_LD.
	(TEA_MISSING_POSIX_HEADERS): added caching of dirent.h check.
	(TEA_BUGGY_STRTOD): added caching (sync with core tcl.m4).

2005-03-24  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_TCL_64BIT_FLAGS): use Tcl header defaults for wide
	int type only on Windows when __int64 is detected as valid.

2005-03-24  Don Porter  <dgp@users.sf.net>

	* README.txt:	Update reference to "SC_* macros" to "TEA_* macros".
	* tcl.m4:	Incorporated recent improvements in SC_PATH_TCLCONFIG
	and SC_PATH_TKCONFIG into TEA_PATH_TCLCONFIG and TEA_PATH_TKCONFIG.
	Corrected search path in TEA_PATH_CONFIG and added
	AC_SUBST($1_BIN_DIR) to TEA_LOAD_CONFIG so that packages that load
	the configuration of another package can know where they loaded
	it from.

2005-03-18  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_CONFIG_CFLAGS): correct 2005-03-17 change to have
	variant LD_SEARCH_FLAGS for gcc and cc builds.

	* tcl.m4 (TEA_PROG_TCLSH, TEA_PROG_WISH): correct x-compile check.

2005-03-17  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: Correct gcc build and HP-UX-11.

2005-02-08  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_ADD_LIBS): don't touch lib args starting with -.
	(TEA_CONFIG_CFLAGS): only define _DLL for CE in shared build.
	(TEA_MAKE_LIB): set RANLIB* to : on Windows (it's not needed).

2005-02-01  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: redo of 2005-01-27 changes to correctly handle paths
	with spaces.  Win/CE and Win/64 builds now require a prebuilt
	tclsh to handle conversion to short pathnames.  This is done in
	the new TEA_PATH_NOSPACE macro.  For Win/CE|64, make CC just the
	compiler and move the necessary includes to CFLAGS.
	(TEA_CONFIG_CFLAGS): Add Solaris 64-bit gcc build support.
	(TEA_PROG_TCLSH, TEA_PROG_WISH): Allow TCLSH_PROG and WISH_PROG to
	be set in the env and prevent resetting.
	(TEA_ADD_LIBS): On Windows using GCC (mingw), convert foo.lib
	args to -lfoo, for use with mingw.
		*** POTENTIAL INCOMPATABILITY ***
	(TEA_CONFIG_CFLAGS): Fix AIX gcc builds to work out-of-box.
	Bumped TEA to 3.2.

2005-01-27  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: remove cygpath calls to support msys.
	Update base CE build assumption to "420,ARMV4,ARM,Pocket PC 2003".
	Make STLIB_LD use $LINKBIN -lib.

2005-01-25  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (Darwin): fixed bug with static build linking to dynamic
	library in /usr/lib etc instead of linking to static library earlier
	in search path. [Tcl Bug 956908]
	Removed obsolete references to Rhapsody. 
	
2004-12-29  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: Updates for VC7 compatibility, fixing CFLAGS and LDFLAGS
	options, using better default -O levels. [Bug 1092952, 1091967]

2004-12-29  Joe English  <jenglish@users.sourceforge.net>

	* tcl.m4: Do not use ${DBGX} suffix when building
	shared libraries [patch #1081595, TIP #34]

2004-09-07  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_CONFIG_CFLAGS): support eVC4 Win/CE builds

2004-08-10  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_INIT, TEA_PREFIX): update handling of exec_prefix to
	work around subdir configures since autoconf only propagates the
	prefix (not exec_prefix).

2004-07-23  Daniel Steffen  <das@users.sourceforge.net>

	* tcl.m4 (TEA_CONFIG_CFLAGS): Darwin section: brought inline with
	Tcl 8.5 HEAD config, removed core specific & obsolete settings.

2004-07-22  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_PATH_X): check in TK_DEFS for MAC_OSX_TK to see if
	we are compiling on Aqua.  Add TEA_WINDOWINGSYSTEM var that
	reflects 'tk windowingsystem' value.

2004-07-16  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_ENABLE_THREADS): force a threaded build when
	building against a threaded core.
	(CFLAGS_WARNING): Remove -Wconversion for gcc builds
	(TEA_CONFIG_CFLAGS): Reorder configure.in for better 64-bit build
	configuration, replacing EXTRA_CFLAGS with CFLAGS.  [Bug #874058]
	Update to latest Tcl 8.5 head config settings.
	Call this TEA version 3.1.

2004-04-29  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_TCL_64BIT_FLAGS): replace AC_TRY_RUN test with
	AC_TRY_COMPILE for the long vs. long long check. (kenny)

2004-04-26  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_TCL_64BIT_FLAGS): update against core tcl.m4 to
	define TCL_WIDE_INT_IS_LONG if 'using long'.

2004-03-19  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: correct Windows builds getting LDFLAGS info in MAKE_LIB

2004-02-11  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: correct TCL_INCLUDES for private headers on Windows - it
	doesn't need the eval.

2004-02-10  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: don't require TK_INCLUDES and TCL_INCLUDES to have the
	DIR_NATIVE vars defined when using private headers on unix.
	Allow $... to TEA_ADD_SOURCES for constructs like
	TEA_ADD_SOURCES([\$(WIN_OBJECTS)]), that allow the developer to
	place more in the Makefile.in.
	tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and
	CHECK on limits.h

2003-12-10  Jeff Hobbs  <jeffh@ActiveState.com>

	* Makefile.in:      added TEA_ADD_LIBS, TEA_ADD_INCLUDES and
	* configure:        TEA_ADD_CFLAGS to configurable parameters with
	* configure.in:     PKG_* equivs in the Makefile.  This allows the
	* tclconfig/tcl.m4: user to worry less about actual magic VAR names.
	Corrected Makefile.in to note that TEA_ADD_TCL_SOURCES requires
	exact file names.

2003-12-09  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: updated OpenBSD support based on [Patch #775246] (cassoff)

2003-12-05  Jeff Hobbs  <jeffh@ActiveState.com>

	* configure:
	* configure.in:
	* Makefile.in (VPATH): readd $(srcdir) to front of VPATH as the
	first part of VPATH can get chopped off.
	Change .c.$(OBJEXT) rule to .c.@OBJEXT@ to support more makes.
	* tclconfig/tcl.m4: add TEA_ADD_STUB_SOURCES to support libstub
	generation and TEA_ADD_TCL_SOURCES to replace RUNTIME_SOURCES as
	the way the user specifies library files.

2003-12-03  Jeff Hobbs  <jeffh@ActiveState.com>

	* configure:           Update of TEA spec to (hopefully) simplify
	* configure.in:        some aspects of TEA by making use of more
	* Makefile.in:         AC 2.5x features.  Use PACKAGE_NAME (instead
	* generic/tclsample.c: of PACKAGE) and PACKAGE_VERSION (instead of
	* tclconfig/tcl.m4:    VERSION) arguments to AC_INIT as the TEA
	package name and version.
	Provide a version argument to TEA_INIT - starting with 3.0.
	Drop all use of interior shell substs that older makefiles didn't
	like.  Use PKG_* naming convention instead.
	Move specification of source files and public headers into
	configure.in with TEA_ADD_SOURCES and TEA_ADD_HEADERS.  These will
	be munged during ./configure into the right obj file names (no
	$(SOURCES:.c=.obj) needed).
	There is almost nothing that should be touched in Makefile.in now
	for the developer.  May want to add a TEA_ADD_TCL_SOURCES for the
	RUNTIME_SOURCES that remains.
	Use SHLID_LD_FLAGS (instead of SHLID_LDFLAGS) as Tcl does.
	Only specify the user requested LDFLAGS/CFLAGS in the Makefile,
	don't mention the _OPTIMIZE/_DEBUG variants.

2003-10-15  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: create a TEA_SETUP_COMPILER_CC the precedes the
	TEA_SETUP_COMPILER macro.  They are split so the check for CC
	occurs before any use of CC.  Also add AC_PROG_CPP to the compiler
	checks.

2003-10-06  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: Updated for autoconf 2.5x prereq.
	Where TCL_WIDE_INT_TYPE would be __int64, defer to the code checks
	in tcl.h, which also handles TCL_LL_MODIFIER* properly.

2003-04-22  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: correct default setting of ARCH for WinCE builds.
	Correct \ escaping for CE sed macros.

2003-04-10  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: replace $(syscal) construct with older `syscall` for
	systems where sh != bash.

2003-04-09  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_WITH_CELIB): add --enable-wince and --with-celib
	options for Windows/CE compilation support.  Requires the
	Microsoft eMbedded SDK and Keuchel's celib emulation layer.

2003-02-18  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_ENABLE_THREADS): Make sure -lpthread gets passed on
	the link line when checking for the pthread_attr_setstacksize
	symbol. (dejong)

	* tcl.m4 (TEA_SETUP_COMPILER): added default calls to
	TEA_TCL_EARLY_FLAGS, TEA_TCL_64BIT_FLAGS,
	TEA_MISSING_POSIX_HEADERS and TEA_BUGGY_STRTOD.

2003-02-14  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: correct HP-UX ia64 --enable-64bit build flags

2003-01-29  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: check $prefix/lib as well as $exec_prefix/lib when
	looking for tcl|tkConfig.sh, as this check is done before we would
	set exec_prefix when the user does not define it.

2003-01-21  Mo DeJong  <mdejong@users.sourceforge.net>

	* tcl.m4 (TEA_CONFIG_CFLAGS): Fix build support
	for mingw, the previous implementation would
	use VC++ when compiling with mingw gcc. Don't
	pass -fPIC since gcc always compiles pic code
	under win32. Change some hard coded cases
	of gcc to ${CC}.

2002-10-15  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: move the CFLAGS definition from TEA_ENABLE_SHARED to
	TEA_MAKE_LIB because setting too early confuses other AC_* macros.
	Correct the HP-11 SHLIB_LD_LIBS setting.
	
	* tcl.m4: add the CFLAGS definition into TEA_ENABLE_SHARED and
	make it pick up the env CFLAGS at configure time.

2002-10-09  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: add --enable-symbols=mem option to enable TCL_MEM_DEBUG.
	Improved AIX 64-bit build support, allow it on AIX-4 as well.
	Enable 64-bit HP-11 compilation with gcc.
	Enable 64-bit IRIX64-6 cc build support.
	Correct FreeBSD thread library linkage.
	Add OSF1 static build support.
	Improve SunOS-5 shared build SHLIB_LD macro.

2002-07-20  Zoran Vasiljevic  <zoran@archiware.com>

	* tcl.m4: Added MINGW32 to list of systems checked for Windows build.
	Also, fixes some indentation issues with "--with-XXX" options.

2002-04-23  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_ENABLE_THREADS): added USE_THREAD_ALLOC define to
	use new threaded allocatory by default on Unix for Tcl 8.4.
	(TEA_CONFIG_CFLAGS): corrected LD_SEARCH_FLAGS for FreeBSD-3+.

2002-04-22  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4 (TEA_SETUP_COMPILER): removed call to AC_CYGWIN so that
	we can use autoconf 2.5x as well as 2.13.  This prevents us from
	being able to warn against the use of cygwin gcc at configure
	time, but allows autoconf 2.5x, which is what is shipped with most
	newer systems.

2002-04-11  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: Enabled COFF as well as CV style debug info with
	--enable-symbols to allow Dr. Watson users to see function info.
	More info on debugging levels can be obtained at:
	http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp

2002-04-03  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: change all SC_* macros to TEA_*.  The SC_ was for
	Scriptics, which is no more.  TEA represents a better, independent
	prefix that won't need changing.
	Added preliminary mingw gcc support. [Patch #538772]
	Added TEA_PREFIX macro that handles defaulting the prefix and
	exec_prefix vars to those used by Tcl if none were specified.
	Added TEA_SETUP_COMPILER macro that encompasses the AC_PROG_CC
	check and several other basic AC_PROG checks needed for making
	executables.  This greatly simplifies user's configure.in files.
	Collapsed AIX-5 defines into AIX-* with extra checks for doing the
	ELF stuff on AIX-5-ia64.
	Updated TEA_ENABLE_THREADS to take an optional arg to allow
	switching it on by default (for Thread) and add sanity checking to
	warn the user if configuring threads incompatibly.

2002-03-29  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: made sure that SHLIB_LDFLAGS was set to LDFLAGS_DEFAULT.
	Removed --enable-64bit support for AIX-4 because it wasn't correct.
	Added -MT or -MD Windows linker switches to properly support
	symbols-enabled builds.

2002-03-28  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: called AC_MSG_ERROR when SC_TEA_INIT wasn't called first
	instead of calling it as that inlines it each time in shell code.
	Changed Windows CFLAGS_OPTIMIZE to use -O2 instead of -Oti.
	Noted TCL_LIB_VERSIONS_OK=nodots for Windows builds.
	A few changes to support itcl (and perhaps others):
	Added support for making your own stub libraries to SC_MAKE_LIB.
	New SC_PATH_CONFIG and SC_LOAD_CONFIG that take a package name arg
	and find that ${pkg}Config.sh file.  itk uses this for itcl.

2002-03-27  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: made SC_LOAD_TKCONFIG recognize when working with a Tk
	build dir setup.
	Added EXTRA_CFLAGS and SHLIB_LD_LIBS substs to SC_CONFIG_CFLAGS.
	Added XLIBSW onto LIBS when it is defined.
	Remove TCL_LIBS from MAKE_LIB and correctly use SHLIB_LD_LIBS
	instead to not rely as much on tclConfig.sh cached info.
	Add TK_BIN_DIR to paths to find wish in SC_PROG_WISH.
	These move towards making TEA much more independent of *Config.sh.

2002-03-19  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: corrected forgotten (UN)SHARED_LIB_SUFFIX and
	SHLIB_SUFFIX defines for Win.
	(SC_PATH_X): made this only do the check on unix platforms. 

2002-03-12  Jeff Hobbs  <jeffh@ActiveState.com>

	* README.txt: updated to reflect fewer files

2002-03-06  Jeff Hobbs  <jeffh@ActiveState.com>

	* config.guess (removed):
	* config.sub (removed): removed unnecessary files

	* installFile.tcl (removed):
	* mkinstalldirs (removed): these aren't really necessary for
	making TEA work

	* tcl.m4 (SC_PUBLIC_TCL_HEADERS, SC_PUBLIC_TK_HEADERS): don't
	check /usr(/local)/include for includes on Windows when not using
	gcc

2002-03-05  Jeff Hobbs  <jeffh@ActiveState.com>

	* tcl.m4: added warnings on Windows, removed RELPATH define and
	added TCL_LIBS to MAKE_LIB macro.

	This import represents 2.0.0, or a new start at attempting to
	make TEA much easier for C extension developers.

	**** moved from tclpro project to core tcl project, ****
	**** renamed to 'tclconfig'                         ****

2001-03-15    Karl Lehenbauer <karl@procplace.com>

	* installFile.tcl: Added updating of the modification time of
	  the target file whether we overwrote it or decided that it
	  hadn't changed.  This was necessary for us to be able to
	  determine whether or not a module install touched the file.

2001-03-08    Karl Lehenbauer <karl@procplace.com>

	* installFile.tcl: Added support for converting new-style (1.1+) 
	  Cygnus drive paths to Tcl-style.

2001-01-15    <brent.welch@interwoven.com>

	* tcl.m4: Added FreeBSD clause.

2001-01-03    <brent.welch@interwoven.com>

	* tcl.m4: Fixed typo in SC_LIB_SPEC where it is checking
	for exec-prefix.

2000-12-01    <brent.welch@interwoven.com>

	* tcl.m4: Concatenated most of the Ajuba acsite.m4 file
	so we don't need to modify the autoconf installation.
	* config.guess:
	* config.sub:
	* installFile.tcl:
	Added files from the itcl config subdirectory,
	which should go away.

2000-7-29    <welch@ajubasolutions.com>

	* Fixed the use of TCL_SRC_DIR and TK_SRC_DIR within
	TCL_PRIVATE_INCLUDES and TK_PRIVATE_INCLUDES to match their recent
	change from $(srcdir) to $(srcdir)/..

These files comprise the basic building blocks for a Tcl Extension
Architecture (TEA) extension.  For more information on TEA see:

	http://www.tcl.tk/doc/tea/

This package is part of the Tcl project at SourceForge, and latest
sources should be available there:

	http://tcl.sourceforge.net/

This package is a freely available open source package.  You can do
virtually anything you like with it, such as modifying it, redistributing
it, and selling it either in whole or in part.

CONTENTS
========
The following is a short description of the files you will find in
the sample extension.

README.txt	This file

install-sh	Program used for copying binaries and script files
		to their install locations.

tcl.m4		Collection of Tcl autoconf macros.  Included by a package's
		aclocal.m4 to define TEA_* macros.

#!/bin/sh
# install - install a program, script, or datafile

scriptversion=2011-04-20.01; # UTC

# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.

nl='
'
IFS=" ""	$nl"

# set DOITPROG to echo to test this script

# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
if test -z "$doit"; then
  doit_exec=exec
else
  doit_exec=$doit
fi

# Put in absolute file names if you don't have them in your path;
# or use environment vars.

chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}

posix_glob='?'
initialize_posix_glob='
  test "$posix_glob" != "?" || {
    if (set -f) 2>/dev/null; then
      posix_glob=
    else
      posix_glob=:
    fi
  }
'

posix_mkdir=

# Desired mode of installed file.
mode=0755

chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=

src=
dst=
dir_arg=
dst_arg=

copy_on_change=false
no_target_directory=

usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
   or: $0 [OPTION]... SRCFILES... DIRECTORY
   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
   or: $0 [OPTION]... -d DIRECTORIES...

In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.

Options:
     --help     display this help and exit.
     --version  display version info and exit.

  -c            (ignored)
  -C            install only if different (preserve the last data modification time)
  -d            create directories instead of installing files.
  -g GROUP      $chgrpprog installed files to GROUP.
  -m MODE       $chmodprog installed files to MODE.
  -o USER       $chownprog installed files to USER.
  -s            $stripprog installed files.
  -S            $stripprog installed files.
  -t DIRECTORY  install into DIRECTORY.
  -T            report an error if DSTFILE is a directory.

Environment variables override the default commands:
  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
  RMPROG STRIPPROG
"

while test $# -ne 0; do
  case $1 in
    -c) ;;

    -C) copy_on_change=true;;

    -d) dir_arg=true;;

    -g) chgrpcmd="$chgrpprog $2"
	shift;;

    --help) echo "$usage"; exit $?;;

    -m) mode=$2
	case $mode in
	  *' '* | *'	'* | *'
'*	  | *'*'* | *'?'* | *'['*)
	    echo "$0: invalid mode: $mode" >&2
	    exit 1;;
	esac
	shift;;

    -o) chowncmd="$chownprog $2"
	shift;;

    -s) stripcmd=$stripprog;;

    -S) stripcmd="$stripprog $2"
	shift;;

    -t) dst_arg=$2
	shift;;

    -T) no_target_directory=true;;

    --version) echo "$0 $scriptversion"; exit $?;;

    --)	shift
	break;;

    -*)	echo "$0: invalid option: $1" >&2
	exit 1;;

    *)  break;;
  esac
  shift
done

if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
  # When -d is used, all remaining arguments are directories to create.
  # When -t is used, the destination is already specified.
  # Otherwise, the last argument is the destination.  Remove it from $@.
  for arg
  do
    if test -n "$dst_arg"; then
      # $@ is not empty: it contains at least $arg.
      set fnord "$@" "$dst_arg"
      shift # fnord
    fi
    shift # arg
    dst_arg=$arg
  done
fi

if test $# -eq 0; then
  if test -z "$dir_arg"; then
    echo "$0: no input file specified." >&2
    exit 1
  fi
  # It's OK to call `install-sh -d' without argument.
  # This can happen when creating conditional directories.
  exit 0
fi

if test -z "$dir_arg"; then
  do_exit='(exit $ret); exit $ret'
  trap "ret=129; $do_exit" 1
  trap "ret=130; $do_exit" 2
  trap "ret=141; $do_exit" 13
  trap "ret=143; $do_exit" 15

  # Set umask so as not to create temps with too-generous modes.
  # However, 'strip' requires both read and write access to temps.
  case $mode in
    # Optimize common cases.
    *644) cp_umask=133;;
    *755) cp_umask=22;;

    *[0-7])
      if test -z "$stripcmd"; then
	u_plus_rw=
      else
	u_plus_rw='% 200'
      fi
      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
    *)
      if test -z "$stripcmd"; then
	u_plus_rw=
      else
	u_plus_rw=,u+rw
      fi
      cp_umask=$mode$u_plus_rw;;
  esac
fi

for src
do
  # Protect names starting with `-'.
  case $src in
    -*) src=./$src;;
  esac

  if test -n "$dir_arg"; then
    dst=$src
    dstdir=$dst
    test -d "$dstdir"
    dstdir_status=$?
  else

    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
    # might cause directories to be created, which would be especially bad
    # if $src (and thus $dsttmp) contains '*'.
    if test ! -f "$src" && test ! -d "$src"; then
      echo "$0: $src does not exist." >&2
      exit 1
    fi

    if test -z "$dst_arg"; then
      echo "$0: no destination specified." >&2
      exit 1
    fi

    dst=$dst_arg
    # Protect names starting with `-'.
    case $dst in
      -*) dst=./$dst;;
    esac

    # If destination is a directory, append the input filename; won't work
    # if double slashes aren't ignored.
    if test -d "$dst"; then
      if test -n "$no_target_directory"; then
	echo "$0: $dst_arg: Is a directory" >&2
	exit 1
      fi
      dstdir=$dst
      dst=$dstdir/`basename "$src"`
      dstdir_status=0
    else
      # Prefer dirname, but fall back on a substitute if dirname fails.
      dstdir=`
	(dirname "$dst") 2>/dev/null ||
	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	     X"$dst" : 'X\(//\)[^/]' \| \
	     X"$dst" : 'X\(//\)$' \| \
	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
	echo X"$dst" |
	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
		   s//\1/
		   q
		 }
		 /^X\(\/\/\)[^/].*/{
		   s//\1/
		   q
		 }
		 /^X\(\/\/\)$/{
		   s//\1/
		   q
		 }
		 /^X\(\/\).*/{
		   s//\1/
		   q
		 }
		 s/.*/./; q'
      `

      test -d "$dstdir"
      dstdir_status=$?
    fi
  fi

  obsolete_mkdir_used=false

  if test $dstdir_status != 0; then
    case $posix_mkdir in
      '')
	# Create intermediate dirs using mode 755 as modified by the umask.
	# This is like FreeBSD 'install' as of 1997-10-28.
	umask=`umask`
	case $stripcmd.$umask in
	  # Optimize common cases.
	  *[2367][2367]) mkdir_umask=$umask;;
	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;

	  *[0-7])
	    mkdir_umask=`expr $umask + 22 \
	      - $umask % 100 % 40 + $umask % 20 \
	      - $umask % 10 % 4 + $umask % 2
	    `;;
	  *) mkdir_umask=$umask,go-w;;
	esac

	# With -d, create the new directory with the user-specified mode.
	# Otherwise, rely on $mkdir_umask.
	if test -n "$dir_arg"; then
	  mkdir_mode=-m$mode
	else
	  mkdir_mode=
	fi

	posix_mkdir=false
	case $umask in
	  *[123567][0-7][0-7])
	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
	    ;;
	  *)
	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0

	    if (umask $mkdir_umask &&
		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
	    then
	      if test -z "$dir_arg" || {
		   # Check for POSIX incompatibilities with -m.
		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
		   # other-writeable bit of parent directory when it shouldn't.
		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
		   case $ls_ld_tmpdir in
		     d????-?r-*) different_mode=700;;
		     d????-?--*) different_mode=755;;
		     *) false;;
		   esac &&
		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
		   }
		 }
	      then posix_mkdir=:
	      fi
	      rmdir "$tmpdir/d" "$tmpdir"
	    else
	      # Remove any dirs left behind by ancient mkdir implementations.
	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
	    fi
	    trap '' 0;;
	esac;;
    esac

    if
      $posix_mkdir && (
	umask $mkdir_umask &&
	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
      )
    then :
    else

      # The umask is ridiculous, or mkdir does not conform to POSIX,
      # or it failed possibly due to a race condition.  Create the
      # directory the slow way, step by step, checking for races as we go.

      case $dstdir in
	/*) prefix='/';;
	-*) prefix='./';;
	*)  prefix='';;
      esac

      eval "$initialize_posix_glob"

      oIFS=$IFS
      IFS=/
      $posix_glob set -f
      set fnord $dstdir
      shift
      $posix_glob set +f
      IFS=$oIFS

      prefixes=

      for d
      do
	test -z "$d" && continue

	prefix=$prefix$d
	if test -d "$prefix"; then
	  prefixes=
	else
	  if $posix_mkdir; then
	    (umask=$mkdir_umask &&
	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
	    # Don't fail if two instances are running concurrently.
	    test -d "$prefix" || exit 1
	  else
	    case $prefix in
	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
	      *) qprefix=$prefix;;
	    esac
	    prefixes="$prefixes '$qprefix'"
	  fi
	fi
	prefix=$prefix/
      done

      if test -n "$prefixes"; then
	# Don't fail if two instances are running concurrently.
	(umask $mkdir_umask &&
	 eval "\$doit_exec \$mkdirprog $prefixes") ||
	  test -d "$dstdir" || exit 1
	obsolete_mkdir_used=true
      fi
    fi
  fi

  if test -n "$dir_arg"; then
    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
  else

    # Make a couple of temp file names in the proper directory.
    dsttmp=$dstdir/_inst.$$_
    rmtmp=$dstdir/_rm.$$_

    # Trap to clean up those temp files at exit.
    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0

    # Copy the file name to the temp name.
    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&

    # and set any options; do chmod last to preserve setuid bits.
    #
    # If any of these fail, we abort the whole thing.  If we want to
    # ignore errors from any of these, just make sure not to ignore
    # errors from the above "$doit $cpprog $src $dsttmp" command.
    #
    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&

    # If -C, don't bother to copy if it wouldn't change the file.
    if $copy_on_change &&
       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&

       eval "$initialize_posix_glob" &&
       $posix_glob set -f &&
       set X $old && old=:$2:$4:$5:$6 &&
       set X $new && new=:$2:$4:$5:$6 &&
       $posix_glob set +f &&

       test "$old" = "$new" &&
       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
    then
      rm -f "$dsttmp"
    else
      # Rename the file to the real destination.
      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||

      # The rename failed, perhaps because mv can't rename something else
      # to itself, or perhaps because mv is so ancient that it does not
      # support -f.
      {
	# Now remove or move aside any old file at destination location.
	# We try this two ways since rm can't unlink itself on some
	# systems and the destination file might be busy for other
	# reasons.  In this case, the final cleanup might fail but the new
	# file should still install successfully.
	{
	  test ! -f "$dst" ||
	  $doit $rmcmd -f "$dst" 2>/dev/null ||
	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
	  } ||
	  { echo "$0: cannot unlink or rename $dst" >&2
	    (exit 1); exit 1
	  }
	} &&

	# Now rename the file to the real destination.
	$doit $mvcmd "$dsttmp" "$dst"
      }
    fi || exit 1

    trap '' 0
  fi
done

# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:

# tcl.m4 --
#
#	This file provides a set of autoconf macros to help TEA-enable
#	a Tcl extension.
#
# Copyright (c) 1999-2000 Ajuba Solutions.
# Copyright (c) 2002-2005 ActiveState Corporation.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.

AC_PREREQ(2.57)

dnl TEA extensions pass us the version of TEA they think they
dnl are compatible with (must be set in TEA_INIT below)
dnl TEA_VERSION="3.9"

# Possible values for key variables defined:
#
# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem')
# TEA_PLATFORM        - windows unix
#

#------------------------------------------------------------------------
# TEA_PATH_TCLCONFIG --
#
#	Locate the tclConfig.sh file and perform a sanity check on
#	the Tcl compile flags
#
# Arguments:
#	none
#
# Results:
#
#	Adds the following arguments to configure:
#		--with-tcl=...
#
#	Defines the following vars:
#		TCL_BIN_DIR	Full path to the directory containing
#				the tclConfig.sh file
#------------------------------------------------------------------------

AC_DEFUN([TEA_PATH_TCLCONFIG], [
    dnl TEA specific: Make sure we are initialized
    AC_REQUIRE([TEA_INIT])
    #
    # Ok, lets find the tcl configuration
    # First, look for one uninstalled.
    # the alternative search directory is invoked by --with-tcl
    #

    if test x"${no_tcl}" = x ; then
	# we reset no_tcl in case something fails here
	no_tcl=true
	AC_ARG_WITH(tcl,
	    AC_HELP_STRING([--with-tcl],
		[directory containing tcl configuration (tclConfig.sh)]),
	    with_tclconfig="${withval}")
	AC_MSG_CHECKING([for Tcl configuration])
	AC_CACHE_VAL(ac_cv_c_tclconfig,[

	    # First check to see if --with-tcl was specified.
	    if test x"${with_tclconfig}" != x ; then
		case "${with_tclconfig}" in
		    */tclConfig.sh )
			if test -f "${with_tclconfig}"; then
			    AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself])
			    with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`"
			fi ;;
		esac
		if test -f "${with_tclconfig}/tclConfig.sh" ; then
		    ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`"
		else
		    AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh])
		fi
	    fi

	    # then check for a private Tcl installation
	    if test x"${ac_cv_c_tclconfig}" = x ; then
		for i in \
			../tcl \
			`ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
			`ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \
			`ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
			../../tcl \
			`ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
			`ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \
			`ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
			../../../tcl \
			`ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
			`ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \
			`ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
		    if test "${TEA_PLATFORM}" = "windows" \
			    -a -f "$i/win/tclConfig.sh" ; then
			ac_cv_c_tclconfig="`(cd $i/win; pwd)`"
			break
		    fi
		    if test -f "$i/unix/tclConfig.sh" ; then
			ac_cv_c_tclconfig="`(cd $i/unix; pwd)`"
			break
		    fi
		done
	    fi

	    # on Darwin, check in Framework installation locations
	    if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then
		for i in `ls -d ~/Library/Frameworks 2>/dev/null` \
			`ls -d /Library/Frameworks 2>/dev/null` \
			`ls -d /Network/Library/Frameworks 2>/dev/null` \
			`ls -d /System/Library/Frameworks 2>/dev/null` \
			; do
		    if test -f "$i/Tcl.framework/tclConfig.sh" ; then
			ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`"
			break
		    fi
		done
	    fi

	    # TEA specific: on Windows, check in common installation locations
	    if test "${TEA_PLATFORM}" = "windows" \
		-a x"${ac_cv_c_tclconfig}" = x ; then
		for i in `ls -d C:/Tcl/lib 2>/dev/null` \
			`ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \
			; do
		    if test -f "$i/tclConfig.sh" ; then
			ac_cv_c_tclconfig="`(cd $i; pwd)`"
			break
		    fi
		done
	    fi

	    # check in a few common install locations
	    if test x"${ac_cv_c_tclconfig}" = x ; then
		for i in `ls -d ${libdir} 2>/dev/null` \
			`ls -d ${exec_prefix}/lib 2>/dev/null` \
			`ls -d ${prefix}/lib 2>/dev/null` \
			`ls -d /usr/local/lib 2>/dev/null` \
			`ls -d /usr/contrib/lib 2>/dev/null` \
			`ls -d /usr/lib 2>/dev/null` \
			`ls -d /usr/lib64 2>/dev/null` \
			`ls -d /usr/lib/tcl8.6 2>/dev/null` \
			`ls -d /usr/lib/tcl8.5 2>/dev/null` \
			; do
		    if test -f "$i/tclConfig.sh" ; then
			ac_cv_c_tclconfig="`(cd $i; pwd)`"
			break
		    fi
		done
	    fi

	    # check in a few other private locations
	    if test x"${ac_cv_c_tclconfig}" = x ; then
		for i in \
			${srcdir}/../tcl \
			`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
			`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \
			`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
		    if test "${TEA_PLATFORM}" = "windows" \
			    -a -f "$i/win/tclConfig.sh" ; then
			ac_cv_c_tclconfig="`(cd $i/win; pwd)`"
			break
		    fi
		    if test -f "$i/unix/tclConfig.sh" ; then
			ac_cv_c_tclconfig="`(cd $i/unix; pwd)`"
			break
		    fi
		done
	    fi
	])

	if test x"${ac_cv_c_tclconfig}" = x ; then
	    TCL_BIN_DIR="# no Tcl configs found"
	    AC_MSG_ERROR([Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh])
	else
	    no_tcl=
	    TCL_BIN_DIR="${ac_cv_c_tclconfig}"
	    AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh])
	fi
    fi
])

#------------------------------------------------------------------------
# TEA_PATH_TKCONFIG --
#
#	Locate the tkConfig.sh file
#
# Arguments:
#	none
#
# Results:
#
#	Adds the following arguments to configure:
#		--with-tk=...
#
#	Defines the following vars:
#		TK_BIN_DIR	Full path to the directory containing
#				the tkConfig.sh file
#------------------------------------------------------------------------

AC_DEFUN([TEA_PATH_TKCONFIG], [
    #
    # Ok, lets find the tk configuration
    # First, look for one uninstalled.
    # the alternative search directory is invoked by --with-tk
    #

    if test x"${no_tk}" = x ; then
	# we reset no_tk in case something fails here
	no_tk=true
	AC_ARG_WITH(tk,
	    AC_HELP_STRING([--with-tk],
		[directory containing tk configuration (tkConfig.sh)]),
	    with_tkconfig="${withval}")
	AC_MSG_CHECKING([for Tk configuration])
	AC_CACHE_VAL(ac_cv_c_tkconfig,[

	    # First check to see if --with-tkconfig was specified.
	    if test x"${with_tkconfig}" != x ; then
		case "${with_tkconfig}" in
		    */tkConfig.sh )
			if test -f "${with_tkconfig}"; then
			    AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself])
			    with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`"
			fi ;;
		esac
		if test -f "${with_tkconfig}/tkConfig.sh" ; then
		    ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`"
		else
		    AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh])
		fi
	    fi

	    # then check for a private Tk library
	    if test x"${ac_cv_c_tkconfig}" = x ; then
		for i in \
			../tk \
			`ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
			`ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \
			`ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \
			../../tk \
			`ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
			`ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \
			`ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \
			../../../tk \
			`ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
			`ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \
			`ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
		    if test "${TEA_PLATFORM}" = "windows" \
			    -a -f "$i/win/tkConfig.sh" ; then
			ac_cv_c_tkconfig="`(cd $i/win; pwd)`"
			break
		    fi
		    if test -f "$i/unix/tkConfig.sh" ; then
			ac_cv_c_tkconfig="`(cd $i/unix; pwd)`"
			break
		    fi
		done
	    fi

	    # on Darwin, check in Framework installation locations
	    if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then
		for i in `ls -d ~/Library/Frameworks 2>/dev/null` \
			`ls -d /Library/Frameworks 2>/dev/null` \
			`ls -d /Network/Library/Frameworks 2>/dev/null` \
			`ls -d /System/Library/Frameworks 2>/dev/null` \
			; do
		    if test -f "$i/Tk.framework/tkConfig.sh" ; then
			ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`"
			break
		    fi
		done
	    fi

	    # check in a few common install locations
	    if test x"${ac_cv_c_tkconfig}" = x ; then
		for i in `ls -d ${libdir} 2>/dev/null` \
			`ls -d ${exec_prefix}/lib 2>/dev/null` \
			`ls -d ${prefix}/lib 2>/dev/null` \
			`ls -d /usr/local/lib 2>/dev/null` \
			`ls -d /usr/contrib/lib 2>/dev/null` \
			`ls -d /usr/lib 2>/dev/null` \
			`ls -d /usr/lib64 2>/dev/null` \
			; do
		    if test -f "$i/tkConfig.sh" ; then
			ac_cv_c_tkconfig="`(cd $i; pwd)`"
			break
		    fi
		done
	    fi

	    # TEA specific: on Windows, check in common installation locations
	    if test "${TEA_PLATFORM}" = "windows" \
		-a x"${ac_cv_c_tkconfig}" = x ; then
		for i in `ls -d C:/Tcl/lib 2>/dev/null` \
			`ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \
			; do
		    if test -f "$i/tkConfig.sh" ; then
			ac_cv_c_tkconfig="`(cd $i; pwd)`"
			break
		    fi
		done
	    fi

	    # check in a few other private locations
	    if test x"${ac_cv_c_tkconfig}" = x ; then
		for i in \
			${srcdir}/../tk \
			`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
			`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \
			`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
		    if test "${TEA_PLATFORM}" = "windows" \
			    -a -f "$i/win/tkConfig.sh" ; then
			ac_cv_c_tkconfig="`(cd $i/win; pwd)`"
			break
		    fi
		    if test -f "$i/unix/tkConfig.sh" ; then
			ac_cv_c_tkconfig="`(cd $i/unix; pwd)`"
			break
		    fi
		done
	    fi
	])

	if test x"${ac_cv_c_tkconfig}" = x ; then
	    TK_BIN_DIR="# no Tk configs found"
	    AC_MSG_ERROR([Can't find Tk configuration definitions. Use --with-tk to specify a directory containing tkConfig.sh])
	else
	    no_tk=
	    TK_BIN_DIR="${ac_cv_c_tkconfig}"
	    AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh])
	fi
    fi
])

#------------------------------------------------------------------------
# TEA_LOAD_TCLCONFIG --
#
#	Load the tclConfig.sh file
#
# Arguments:
#
#	Requires the following vars to be set:
#		TCL_BIN_DIR
#
# Results:
#
#	Substitutes the following vars:
#		TCL_BIN_DIR
#		TCL_SRC_DIR
#		TCL_LIB_FILE
#------------------------------------------------------------------------

AC_DEFUN([TEA_LOAD_TCLCONFIG], [
    AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh])

    if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then
        AC_MSG_RESULT([loading])
	. "${TCL_BIN_DIR}/tclConfig.sh"
    else
        AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh])
    fi

    # eval is required to do the TCL_DBGX substitution
    eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\""
    eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\""

    # If the TCL_BIN_DIR is the build directory (not the install directory),
    # then set the common variable name to the value of the build variables.
    # For example, the variable TCL_LIB_SPEC will be set to the value
    # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC
    # instead of TCL_BUILD_LIB_SPEC since it will work with both an
    # installed and uninstalled version of Tcl.
    if test -f "${TCL_BIN_DIR}/Makefile" ; then
        TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}"
        TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}"
        TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}"
    elif test "`uname -s`" = "Darwin"; then
	# If Tcl was built as a framework, attempt to use the libraries
	# from the framework at the given location so that linking works
	# against Tcl.framework installed in an arbitrary location.
	case ${TCL_DEFS} in
	    *TCL_FRAMEWORK*)
		if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then
		    for i in "`cd "${TCL_BIN_DIR}"; pwd`" \
			     "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do
			if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then
			    TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}"
			    break
			fi
		    done
		fi
		if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then
		    TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}"  | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}"
		    TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"
		fi
		;;
	esac
    fi

    # eval is required to do the TCL_DBGX substitution
    eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\""
    eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\""
    eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\""
    eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\""

    AC_SUBST(TCL_VERSION)
    AC_SUBST(TCL_PATCH_LEVEL)
    AC_SUBST(TCL_BIN_DIR)
    AC_SUBST(TCL_SRC_DIR)

    AC_SUBST(TCL_LIB_FILE)
    AC_SUBST(TCL_LIB_FLAG)
    AC_SUBST(TCL_LIB_SPEC)

    AC_SUBST(TCL_STUB_LIB_FILE)
    AC_SUBST(TCL_STUB_LIB_FLAG)
    AC_SUBST(TCL_STUB_LIB_SPEC)

    AC_MSG_CHECKING([platform])
    hold_cc=$CC; CC="$TCL_CC"
    AC_TRY_COMPILE(,[
	    #ifdef _WIN32
		#error win32
	    #endif
    ], TEA_PLATFORM="unix",
	    TEA_PLATFORM="windows"
    )
    CC=$hold_cc
    AC_MSG_RESULT($TEA_PLATFORM)

    # The BUILD_$pkg is to define the correct extern storage class
    # handling when making this package
    AC_DEFINE_UNQUOTED(BUILD_${PACKAGE_NAME}, [],
	    [Building extension source?])
    # Do this here as we have fully defined TEA_PLATFORM now
    if test "${TEA_PLATFORM}" = "windows" ; then
	EXEEXT=".exe"
	CLEANFILES="$CLEANFILES *.lib *.dll *.pdb *.exp"
    fi

    # TEA specific:
    AC_SUBST(CLEANFILES)
    AC_SUBST(TCL_LIBS)
    AC_SUBST(TCL_DEFS)
    AC_SUBST(TCL_EXTRA_CFLAGS)
    AC_SUBST(TCL_LD_FLAGS)
    AC_SUBST(TCL_SHLIB_LD_LIBS)
])

#------------------------------------------------------------------------
# TEA_LOAD_TKCONFIG --
#
#	Load the tkConfig.sh file
#
# Arguments:
#
#	Requires the following vars to be set:
#		TK_BIN_DIR
#
# Results:
#
#	Sets the following vars that should be in tkConfig.sh:
#		TK_BIN_DIR
#------------------------------------------------------------------------

AC_DEFUN([TEA_LOAD_TKCONFIG], [
    AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh])

    if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then
        AC_MSG_RESULT([loading])
	. "${TK_BIN_DIR}/tkConfig.sh"
    else
        AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh])
    fi

    # eval is required to do the TK_DBGX substitution
    eval "TK_LIB_FILE=\"${TK_LIB_FILE}\""
    eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\""

    # If the TK_BIN_DIR is the build directory (not the install directory),
    # then set the common variable name to the value of the build variables.
    # For example, the variable TK_LIB_SPEC will be set to the value
    # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC
    # instead of TK_BUILD_LIB_SPEC since it will work with both an
    # installed and uninstalled version of Tcl.
    if test -f "${TK_BIN_DIR}/Makefile" ; then
        TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}"
        TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}"
        TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}"
    elif test "`uname -s`" = "Darwin"; then
	# If Tk was built as a framework, attempt to use the libraries
	# from the framework at the given location so that linking works
	# against Tk.framework installed in an arbitrary location.
	case ${TK_DEFS} in
	    *TK_FRAMEWORK*)
		if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then
		    for i in "`cd "${TK_BIN_DIR}"; pwd`" \
			     "`cd "${TK_BIN_DIR}"/../..; pwd`"; do
			if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then
			    TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}"
			    break
			fi
		    done
		fi
		if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then
		    TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}"  | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}"
		    TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"
		fi
		;;
	esac
    fi

    # eval is required to do the TK_DBGX substitution
    eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\""
    eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\""
    eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\""
    eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\""

    # TEA specific: Ensure windowingsystem is defined
    if test "${TEA_PLATFORM}" = "unix" ; then
	case ${TK_DEFS} in
	    *MAC_OSX_TK*)
		AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?])
		TEA_WINDOWINGSYSTEM="aqua"
		;;
	    *)
		TEA_WINDOWINGSYSTEM="x11"
		;;
	esac
    elif test "${TEA_PLATFORM}" = "windows" ; then
	TEA_WINDOWINGSYSTEM="win32"
    fi

    AC_SUBST(TK_VERSION)
    AC_SUBST(TK_BIN_DIR)
    AC_SUBST(TK_SRC_DIR)

    AC_SUBST(TK_LIB_FILE)
    AC_SUBST(TK_LIB_FLAG)
    AC_SUBST(TK_LIB_SPEC)

    AC_SUBST(TK_STUB_LIB_FILE)
    AC_SUBST(TK_STUB_LIB_FLAG)
    AC_SUBST(TK_STUB_LIB_SPEC)

    # TEA specific:
    AC_SUBST(TK_LIBS)
    AC_SUBST(TK_XINCLUDES)
])

#------------------------------------------------------------------------
# TEA_PROG_TCLSH
#	Determine the fully qualified path name of the tclsh executable
#	in the Tcl build directory or the tclsh installed in a bin
#	directory. This macro will correctly determine the name
#	of the tclsh executable even if tclsh has not yet been
#	built in the build directory. The tclsh found is always
#	associated with a tclConfig.sh file. This tclsh should be used
#	only for running extension test cases. It should never be
#	or generation of files (like pkgIndex.tcl) at build time.
#
# Arguments:
#	none
#
# Results:
#	Substitutes the following vars:
#		TCLSH_PROG
#------------------------------------------------------------------------

AC_DEFUN([TEA_PROG_TCLSH], [
    AC_MSG_CHECKING([for tclsh])
    if test -f "${TCL_BIN_DIR}/Makefile" ; then
        # tclConfig.sh is in Tcl build directory
        if test "${TEA_PLATFORM}" = "windows"; then
            TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}"
        else
            TCLSH_PROG="${TCL_BIN_DIR}/tclsh"
        fi
    else
        # tclConfig.sh is in install location
        if test "${TEA_PLATFORM}" = "windows"; then
            TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}"
        else
            TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}"
        fi
        list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \
              `ls -d ${TCL_BIN_DIR}/..     2>/dev/null` \
              `ls -d ${TCL_PREFIX}/bin     2>/dev/null`"
        for i in $list ; do
            if test -f "$i/${TCLSH_PROG}" ; then
                REAL_TCL_BIN_DIR="`cd "$i"; pwd`/"
                break
            fi
        done
        TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}"
    fi
    AC_MSG_RESULT([${TCLSH_PROG}])
    AC_SUBST(TCLSH_PROG)
])

#------------------------------------------------------------------------
# TEA_PROG_WISH
#	Determine the fully qualified path name of the wish executable
#	in the Tk build directory or the wish installed in a bin
#	directory. This macro will correctly determine the name
#	of the wish executable even if wish has not yet been
#	built in the build directory. The wish found is always
#	associated with a tkConfig.sh file. This wish should be used
#	only for running extension test cases. It should never be
#	or generation of files (like pkgIndex.tcl) at build time.
#
# Arguments:
#	none
#
# Results:
#	Substitutes the following vars:
#		WISH_PROG
#------------------------------------------------------------------------

AC_DEFUN([TEA_PROG_WISH], [
    AC_MSG_CHECKING([for wish])
    if test -f "${TK_BIN_DIR}/Makefile" ; then
        # tkConfig.sh is in Tk build directory
        if test "${TEA_PLATFORM}" = "windows"; then
            WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}"
        else
            WISH_PROG="${TK_BIN_DIR}/wish"
        fi
    else
        # tkConfig.sh is in install location
        if test "${TEA_PLATFORM}" = "windows"; then
            WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}"
        else
            WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}"
        fi
        list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \
              `ls -d ${TK_BIN_DIR}/..     2>/dev/null` \
              `ls -d ${TK_PREFIX}/bin     2>/dev/null`"
        for i in $list ; do
            if test -f "$i/${WISH_PROG}" ; then
                REAL_TK_BIN_DIR="`cd "$i"; pwd`/"
                break
            fi
        done
        WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}"
    fi
    AC_MSG_RESULT([${WISH_PROG}])
    AC_SUBST(WISH_PROG)
])

#------------------------------------------------------------------------
# TEA_ENABLE_SHARED --
#
#	Allows the building of shared libraries
#
# Arguments:
#	none
#
# Results:
#
#	Adds the following arguments to configure:
#		--enable-shared=yes|no
#
#	Defines the following vars:
#		STATIC_BUILD	Used for building import/export libraries
#				on Windows.
#
#	Sets the following vars:
#		SHARED_BUILD	Value of 1 or 0
#------------------------------------------------------------------------

AC_DEFUN([TEA_ENABLE_SHARED], [
    AC_MSG_CHECKING([how to build libraries])
    AC_ARG_ENABLE(shared,
	AC_HELP_STRING([--enable-shared],
	    [build and link with shared libraries (default: on)]),
	[tcl_ok=$enableval], [tcl_ok=yes])

    if test "${enable_shared+set}" = set; then
	enableval="$enable_shared"
	tcl_ok=$enableval
    else
	tcl_ok=yes
    fi

    if test "$tcl_ok" = "yes" ; then
	AC_MSG_RESULT([shared])
	SHARED_BUILD=1
    else
	AC_MSG_RESULT([static])
	SHARED_BUILD=0
	AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?])
    fi
    AC_SUBST(SHARED_BUILD)
])

#------------------------------------------------------------------------
# TEA_ENABLE_THREADS --
#
#	Specify if thread support should be enabled.  If "yes" is specified
#	as an arg (optional), threads are enabled by default, "no" means
#	threads are disabled.  "yes" is the default.
#
#	TCL_THREADS is checked so that if you are compiling an extension
#	against a threaded core, your extension must be compiled threaded
#	as well.
#
#	Note that it is legal to have a thread enabled extension run in a
#	threaded or non-threaded Tcl core, but a non-threaded extension may
#	only run in a non-threaded Tcl core.
#
# Arguments:
#	none
#
# Results:
#
#	Adds the following arguments to configure:
#		--enable-threads
#
#	Sets the following vars:
#		THREADS_LIBS	Thread library(s)
#
#	Defines the following vars:
#		TCL_THREADS
#		_REENTRANT
#		_THREAD_SAFE
#------------------------------------------------------------------------

AC_DEFUN([TEA_ENABLE_THREADS], [
    AC_ARG_ENABLE(threads,
	AC_HELP_STRING([--enable-threads],
	    [build with threads]),
	[tcl_ok=$enableval], [tcl_ok=yes])

    if test "${enable_threads+set}" = set; then
	enableval="$enable_threads"
	tcl_ok=$enableval
    else
	tcl_ok=yes
    fi

    if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then
	TCL_THREADS=1

	if test "${TEA_PLATFORM}" != "windows" ; then
	    # We are always OK on Windows, so check what this platform wants:

	    # USE_THREAD_ALLOC tells us to try the special thread-based
	    # allocator that significantly reduces lock contention
	    AC_DEFINE(USE_THREAD_ALLOC, 1,
		[Do we want to use the threaded memory allocator?])
	    AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
	    if test "`uname -s`" = "SunOS" ; then
		AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
			[Do we really want to follow the standard? Yes we do!])
	    fi
	    AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?])
	    AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no)
	    if test "$tcl_ok" = "no"; then
		# Check a little harder for __pthread_mutex_init in the same
		# library, as some systems hide it there until pthread.h is
		# defined.  We could alternatively do an AC_TRY_COMPILE with
		# pthread.h, but that will work with libpthread really doesn't
		# exist, like AIX 4.2.  [Bug: 4359]
		AC_CHECK_LIB(pthread, __pthread_mutex_init,
		    tcl_ok=yes, tcl_ok=no)
	    fi

	    if test "$tcl_ok" = "yes"; then
		# The space is needed
		THREADS_LIBS=" -lpthread"
	    else
		AC_CHECK_LIB(pthreads, pthread_mutex_init,
		    tcl_ok=yes, tcl_ok=no)
		if test "$tcl_ok" = "yes"; then
		    # The space is needed
		    THREADS_LIBS=" -lpthreads"
		else
		    AC_CHECK_LIB(c, pthread_mutex_init,
			tcl_ok=yes, tcl_ok=no)
		    if test "$tcl_ok" = "no"; then
			AC_CHECK_LIB(c_r, pthread_mutex_init,
			    tcl_ok=yes, tcl_ok=no)
			if test "$tcl_ok" = "yes"; then
			    # The space is needed
			    THREADS_LIBS=" -pthread"
			else
			    TCL_THREADS=0
			    AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled])
			fi
		    fi
		fi
	    fi
	fi
    else
	TCL_THREADS=0
    fi
    # Do checking message here to not mess up interleaved configure output
    AC_MSG_CHECKING([for building with threads])
    if test "${TCL_THREADS}" = 1; then
	AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?])
	AC_MSG_RESULT([yes (default)])
    else
	AC_MSG_RESULT([no])
    fi
    # TCL_THREADS sanity checking.  See if our request for building with
    # threads is the same as the way Tcl was built.  If not, warn the user.
    case ${TCL_DEFS} in
	*THREADS=1*)
	    if test "${TCL_THREADS}" = "0"; then
		AC_MSG_WARN([
    Building ${PACKAGE_NAME} without threads enabled, but building against Tcl
    that IS thread-enabled.  It is recommended to use --enable-threads.])
	    fi
	    ;;
	*)
	    if test "${TCL_THREADS}" = "1"; then
		AC_MSG_WARN([
    --enable-threads requested, but building against a Tcl that is NOT
    thread-enabled.  This is an OK configuration that will also run in
    a thread-enabled core.])
	    fi
	    ;;
    esac
    AC_SUBST(TCL_THREADS)
])

#------------------------------------------------------------------------
# TEA_ENABLE_SYMBOLS --
#
#	Specify if debugging symbols should be used.
#	Memory (TCL_MEM_DEBUG) debugging can also be enabled.
#
# Arguments:
#	none
#
#	TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives
#	the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted.
#	Requires the following vars to be set in the Makefile:
#		CFLAGS_DEFAULT
#		LDFLAGS_DEFAULT
#
# Results:
#
#	Adds the following arguments to configure:
#		--enable-symbols
#
#	Defines the following vars:
#		CFLAGS_DEFAULT	Sets to $(CFLAGS_DEBUG) if true
#				Sets to "$(CFLAGS_OPTIMIZE) -DNDEBUG" if false
#		LDFLAGS_DEFAULT	Sets to $(LDFLAGS_DEBUG) if true
#				Sets to $(LDFLAGS_OPTIMIZE) if false
#		DBGX		Formerly used as debug library extension;
#				always blank now.
#------------------------------------------------------------------------

AC_DEFUN([TEA_ENABLE_SYMBOLS], [
    dnl TEA specific: Make sure we are initialized
    AC_REQUIRE([TEA_CONFIG_CFLAGS])
    AC_MSG_CHECKING([for build with symbols])
    AC_ARG_ENABLE(symbols,
	AC_HELP_STRING([--enable-symbols],
	    [build with debugging symbols (default: off)]),
	[tcl_ok=$enableval], [tcl_ok=no])
    DBGX=""
    if test "$tcl_ok" = "no"; then
	CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE} -DNDEBUG"
	LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}"
	AC_MSG_RESULT([no])
    else
	CFLAGS_DEFAULT="${CFLAGS_DEBUG}"
	LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}"
	if test "$tcl_ok" = "yes"; then
	    AC_MSG_RESULT([yes (standard debugging)])
	fi
    fi
    # TEA specific:
    if test "${TEA_PLATFORM}" != "windows" ; then
	LDFLAGS_DEFAULT="${LDFLAGS}"
    fi
    AC_SUBST(CFLAGS_DEFAULT)
    AC_SUBST(LDFLAGS_DEFAULT)
    AC_SUBST(TCL_DBGX)

    if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then
	AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?])
    fi

    if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then
	if test "$tcl_ok" = "all"; then
	    AC_MSG_RESULT([enabled symbols mem debugging])
	else
	    AC_MSG_RESULT([enabled $tcl_ok debugging])
	fi
    fi
])

#------------------------------------------------------------------------
# TEA_ENABLE_LANGINFO --
#
#	Allows use of modern nl_langinfo check for better l10n.
#	This is only relevant for Unix.
#
# Arguments:
#	none
#
# Results:
#
#	Adds the following arguments to configure:
#		--enable-langinfo=yes|no (default is yes)
#
#	Defines the following vars:
#		HAVE_LANGINFO	Triggers use of nl_langinfo if defined.
#------------------------------------------------------------------------

AC_DEFUN([TEA_ENABLE_LANGINFO], [
    AC_ARG_ENABLE(langinfo,
	AC_HELP_STRING([--enable-langinfo],
	    [use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]),
	[langinfo_ok=$enableval], [langinfo_ok=yes])

    HAVE_LANGINFO=0
    if test "$langinfo_ok" = "yes"; then
	AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no])
    fi
    AC_MSG_CHECKING([whether to use nl_langinfo])
    if test "$langinfo_ok" = "yes"; then
	AC_CACHE_VAL(tcl_cv_langinfo_h, [
	    AC_TRY_COMPILE([#include <langinfo.h>], [nl_langinfo(CODESET);],
		    [tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])])
	AC_MSG_RESULT([$tcl_cv_langinfo_h])
	if test $tcl_cv_langinfo_h = yes; then
	    AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?])
	fi
    else
	AC_MSG_RESULT([$langinfo_ok])
    fi
])

#--------------------------------------------------------------------
# TEA_CONFIG_SYSTEM
#
#	Determine what the system is (some things cannot be easily checked
#	on a feature-driven basis, alas). This can usually be done via the
#	"uname" command.
#
# Arguments:
#	none
#
# Results:
#	Defines the following var:
#
#	system -	System/platform/version identification code.
#--------------------------------------------------------------------

AC_DEFUN([TEA_CONFIG_SYSTEM], [
    AC_CACHE_CHECK([system version], tcl_cv_sys_version, [
	# TEA specific:
	if test "${TEA_PLATFORM}" = "windows" ; then
	    tcl_cv_sys_version=windows
	else
	    tcl_cv_sys_version=`uname -s`-`uname -r`
	    if test "$?" -ne 0 ; then
		AC_MSG_WARN([can't find uname command])
		tcl_cv_sys_version=unknown
	    else
		if test "`uname -s`" = "AIX" ; then
		    tcl_cv_sys_version=AIX-`uname -v`.`uname -r`
		fi
	    fi
	fi
    ])
    system=$tcl_cv_sys_version
])

#--------------------------------------------------------------------
# TEA_CONFIG_CFLAGS
#
#	Try to determine the proper flags to pass to the compiler
#	for building shared libraries and other such nonsense.
#
# Arguments:
#	none
#
# Results:
#
#	Defines and substitutes the following vars:
#
#	DL_OBJS, DL_LIBS - removed for TEA, only needed by core.
#       LDFLAGS -      Flags to pass to the compiler when linking object
#                       files into an executable application binary such
#                       as tclsh.
#       LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib",
#                       that tell the run-time dynamic linker where to look
#                       for shared libraries such as libtcl.so.  Depends on
#                       the variable LIB_RUNTIME_DIR in the Makefile. Could
#                       be the same as CC_SEARCH_FLAGS if ${CC} is used to link.
#       CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib",
#                       that tell the run-time dynamic linker where to look
#                       for shared libraries such as libtcl.so.  Depends on
#                       the variable LIB_RUNTIME_DIR in the Makefile.
#       SHLIB_CFLAGS -  Flags to pass to cc when compiling the components
#                       of a shared library (may request position-independent
#                       code, among other things).
#       SHLIB_LD -      Base command to use for combining object files
#                       into a shared library.
#       SHLIB_LD_LIBS - Dependent libraries for the linker to scan when
#                       creating shared libraries.  This symbol typically
#                       goes at the end of the "ld" commands that build
#                       shared libraries. The value of the symbol defaults to
#                       "${LIBS}" if all of the dependent libraries should
#                       be specified when creating a shared library.  If
#                       dependent libraries should not be specified (as on
#                       SunOS 4.x, where they cause the link to fail, or in
#                       general if Tcl and Tk aren't themselves shared
#                       libraries), then this symbol has an empty string
#                       as its value.
#       SHLIB_SUFFIX -  Suffix to use for the names of dynamically loadable
#                       extensions.  An empty string means we don't know how
#                       to use shared libraries on this platform.
#       LIB_SUFFIX -    Specifies everything that comes after the "libfoo"
#                       in a static or shared library name, using the $PACKAGE_VERSION variable
#                       to put the version in the right place.  This is used
#                       by platforms that need non-standard library names.
#                       Examples:  ${PACKAGE_VERSION}.so.1.1 on NetBSD, since it needs
#                       to have a version after the .so, and ${PACKAGE_VERSION}.a
#                       on AIX, since a shared library needs to have
#                       a .a extension whereas shared objects for loadable
#                       extensions have a .so extension.  Defaults to
#                       ${PACKAGE_VERSION}${SHLIB_SUFFIX}.
#	CFLAGS_DEBUG -
#			Flags used when running the compiler in debug mode
#	CFLAGS_OPTIMIZE -
#			Flags used when running the compiler in optimize mode
#	CFLAGS -	Additional CFLAGS added as necessary (usually 64-bit)
#--------------------------------------------------------------------

AC_DEFUN([TEA_CONFIG_CFLAGS], [
    dnl TEA specific: Make sure we are initialized
    AC_REQUIRE([TEA_INIT])

    # Step 0.a: Enable 64 bit support?

    AC_MSG_CHECKING([if 64bit support is requested])
    AC_ARG_ENABLE(64bit,
	AC_HELP_STRING([--enable-64bit],
	    [enable 64bit support (default: off)]),
	[do64bit=$enableval], [do64bit=no])
    AC_MSG_RESULT([$do64bit])

    # Step 0.b: Enable Solaris 64 bit VIS support?

    AC_MSG_CHECKING([if 64bit Sparc VIS support is requested])
    AC_ARG_ENABLE(64bit-vis,
	AC_HELP_STRING([--enable-64bit-vis],
	    [enable 64bit Sparc VIS support (default: off)]),
	[do64bitVIS=$enableval], [do64bitVIS=no])
    AC_MSG_RESULT([$do64bitVIS])
    # Force 64bit on with VIS
    AS_IF([test "$do64bitVIS" = "yes"], [do64bit=yes])

    # Step 0.c: Check if visibility support is available. Do this here so
    # that platform specific alternatives can be used below if this fails.

    AC_CACHE_CHECK([if compiler supports visibility "hidden"],
	tcl_cv_cc_visibility_hidden, [
	hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror"
	AC_TRY_LINK([
	    extern __attribute__((__visibility__("hidden"))) void f(void);
	    void f(void) {}], [f();], tcl_cv_cc_visibility_hidden=yes,
	    tcl_cv_cc_visibility_hidden=no)
	CFLAGS=$hold_cflags])
    AS_IF([test $tcl_cv_cc_visibility_hidden = yes], [
	AC_DEFINE(MODULE_SCOPE,
	    [extern __attribute__((__visibility__("hidden")))],
	    [Compiler support for module scope symbols])
	AC_DEFINE(HAVE_HIDDEN, [1], [Compiler support for module scope symbols])
    ])

    # Step 0.d: Disable -rpath support?

    AC_MSG_CHECKING([if rpath support is requested])
    AC_ARG_ENABLE(rpath,
	AC_HELP_STRING([--disable-rpath],
	    [disable rpath support (default: on)]),
	[doRpath=$enableval], [doRpath=yes])
    AC_MSG_RESULT([$doRpath])

    # TEA specific: Cross-compiling options for Windows/CE builds?

    AS_IF([test "${TEA_PLATFORM}" = windows], [
	AC_MSG_CHECKING([if Windows/CE build is requested])
	AC_ARG_ENABLE(wince,
	    AC_HELP_STRING([--enable-wince],
		[enable Win/CE support (where applicable)]),
	    [doWince=$enableval], [doWince=no])
	AC_MSG_RESULT([$doWince])
    ])

    # Set the variable "system" to hold the name and version number
    # for the system.

    TEA_CONFIG_SYSTEM

    # Require ranlib early so we can override it in special cases below.

    AC_REQUIRE([AC_PROG_RANLIB])

    # Set configuration options based on system name and version.
    # This is similar to Tcl's unix/tcl.m4 except that we've added a
    # "windows" case and removed some core-only vars.

    do64bit_ok=no
    # default to '{$LIBS}' and set to "" on per-platform necessary basis
    SHLIB_LD_LIBS='${LIBS}'
    # When ld needs options to work in 64-bit mode, put them in
    # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load]
    # is disabled by the user. [Bug 1016796]
    LDFLAGS_ARCH=""
    UNSHARED_LIB_SUFFIX=""
    # TEA specific: use PACKAGE_VERSION instead of VERSION
    TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`'
    ECHO_VERSION='`echo ${PACKAGE_VERSION}`'
    TCL_LIB_VERSIONS_OK=ok
    CFLAGS_DEBUG=-g
    AS_IF([test "$GCC" = yes], [
	CFLAGS_OPTIMIZE=-O2
	CFLAGS_WARNING="-Wall"
    ], [
	CFLAGS_OPTIMIZE=-O
	CFLAGS_WARNING=""
    ])
    AC_CHECK_TOOL(AR, ar)
    STLIB_LD='${AR} cr'
    LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH"
    AS_IF([test "x$SHLIB_VERSION" = x],[SHLIB_VERSION=""],[SHLIB_VERSION=".$SHLIB_VERSION"])
    case $system in
	# TEA specific:
	windows)
	    # This is a 2-stage check to make sure we have the 64-bit SDK
	    # We have to know where the SDK is installed.
	    # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs
	    # MACHINE is IX86 for LINK, but this is used by the manifest,
	    # which requires x86|amd64|ia64.
	    MACHINE="X86"
	    if test "$do64bit" != "no" ; then
		if test "x${MSSDK}x" = "xx" ; then
		    MSSDK="C:/Progra~1/Microsoft Platform SDK"
		fi
		MSSDK=`echo "$MSSDK" | sed -e  's!\\\!/!g'`
		PATH64=""
		case "$do64bit" in
		    amd64|x64|yes)
			MACHINE="AMD64" ; # default to AMD64 64-bit build
			PATH64="${MSSDK}/Bin/Win64/x86/AMD64"
			;;
		    ia64)
			MACHINE="IA64"
			PATH64="${MSSDK}/Bin/Win64"
			;;
		esac
		if test "$GCC" != "yes" -a ! -d "${PATH64}" ; then
		    AC_MSG_WARN([Could not find 64-bit $MACHINE SDK to enable 64bit mode])
		    AC_MSG_WARN([Ensure latest Platform SDK is installed])
		    do64bit="no"
		else
		    AC_MSG_RESULT([   Using 64-bit $MACHINE mode])
		    do64bit_ok="yes"
		fi
	    fi

	    if test "$doWince" != "no" ; then
		if test "$do64bit" != "no" ; then
		    AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible])
		fi
		if test "$GCC" = "yes" ; then
		    AC_MSG_ERROR([Windows/CE and GCC builds incompatible])
		fi
		TEA_PATH_CELIB
		# Set defaults for common evc4/PPC2003 setup
		# Currently Tcl requires 300+, possibly 420+ for sockets
		CEVERSION=420; 		# could be 211 300 301 400 420 ...
		TARGETCPU=ARMV4;	# could be ARMV4 ARM MIPS SH3 X86 ...
		ARCH=ARM;		# could be ARM MIPS X86EM ...
		PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002"
		if test "$doWince" != "yes"; then
		    # If !yes then the user specified something
		    # Reset ARCH to allow user to skip specifying it
		    ARCH=
		    eval `echo $doWince | awk -F, '{ \
	    if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \
	    if ([$]1 < 400)   { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \
	    if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \
	    if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \
	    if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \
		    }'`
		    if test "x${ARCH}" = "x" ; then
			ARCH=$TARGETCPU;
		    fi
		fi
		OSVERSION=WCE$CEVERSION;
	    	if test "x${WCEROOT}" = "x" ; then
			WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0"
		    if test ! -d "${WCEROOT}" ; then
			WCEROOT="C:/Program Files/Microsoft eMbedded Tools"
		    fi
		fi
		if test "x${SDKROOT}" = "x" ; then
		    SDKROOT="C:/Program Files/Windows CE Tools"
		    if test ! -d "${SDKROOT}" ; then
			SDKROOT="C:/Windows CE Tools"
		    fi
		fi
		WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'`
		SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'`
		if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \
		    -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then
		    AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]])
		    doWince="no"
		else
		    # We could PATH_NOSPACE these, but that's not important,
		    # as long as we quote them when used.
		    CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include"
		    if test -d "${CEINCLUDE}/${TARGETCPU}" ; then
			CEINCLUDE="${CEINCLUDE}/${TARGETCPU}"
		    fi
		    CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}"
    		fi
	    fi

	    if test "$GCC" != "yes" ; then
	        if test "${SHARED_BUILD}" = "0" ; then
		    runtime=-MT
	        else
		    runtime=-MD
	        fi

                if test "$do64bit" != "no" ; then
		    # All this magic is necessary for the Win64 SDK RC1 - hobbs
		    CC="\"${PATH64}/cl.exe\""
		    CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\""
		    RC="\"${MSSDK}/bin/rc.exe\""
		    lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\""
		    LINKBIN="\"${PATH64}/link.exe\""
		    CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d"
		    CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}"
		    # Avoid 'unresolved external symbol __security_cookie'
		    # errors, c.f. http://support.microsoft.com/?id=894573
		    TEA_ADD_LIBS([bufferoverflowU.lib])
		elif test "$doWince" != "no" ; then
		    CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin"
		    if test "${TARGETCPU}" = "X86"; then
			CC="\"${CEBINROOT}/cl.exe\""
		    else
			CC="\"${CEBINROOT}/cl${ARCH}.exe\""
		    fi
		    CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\""
		    RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\""
		    arch=`echo ${ARCH} | awk '{print tolower([$]0)}'`
		    defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS"
		    if test "${SHARED_BUILD}" = "1" ; then
			# Static CE builds require static celib as well
		    	defs="${defs} _DLL"
		    fi
		    for i in $defs ; do
			AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i)
		    done
		    AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version])
		    AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version])
		    CFLAGS_DEBUG="-nologo -Zi -Od"
		    CFLAGS_OPTIMIZE="-nologo -Ox"
		    lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'`
		    lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo"
		    LINKBIN="\"${CEBINROOT}/link.exe\""
		    AC_SUBST(CELIB_DIR)
		else
		    RC="rc"
		    lflags="-nologo"
		    LINKBIN="link"
		    CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d"
		    CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}"
		fi
	    fi

	    if test "$GCC" = "yes"; then
		# mingw gcc mode
		AC_CHECK_TOOL(RC, windres)
		CFLAGS_DEBUG="-g"
		CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer"
		SHLIB_LD='${CC} -shared'
		UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
		LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}"
		LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}"

		AC_CACHE_CHECK(for cross-compile version of gcc,
			ac_cv_cross,
			AC_TRY_COMPILE([
			    #ifdef _WIN32
				#error cross-compiler
			    #endif
			], [],
			ac_cv_cross=yes,
			ac_cv_cross=no)
		      )
		      if test "$ac_cv_cross" = "yes"; then
			case "$do64bit" in
			    amd64|x64|yes)
				CC="x86_64-w64-mingw32-gcc"
				LD="x86_64-w64-mingw32-ld"
				AR="x86_64-w64-mingw32-ar"
				RANLIB="x86_64-w64-mingw32-ranlib"
				RC="x86_64-w64-mingw32-windres"
			    ;;
			    *)
				CC="i686-w64-mingw32-gcc"
				LD="i686-w64-mingw32-ld"
				AR="i686-w64-mingw32-ar"
				RANLIB="i686-w64-mingw32-ranlib"
				RC="i686-w64-mingw32-windres"
			    ;;
			esac
		fi

	    else
		SHLIB_LD="${LINKBIN} -dll ${lflags}"
		# link -lib only works when -lib is the first arg
		STLIB_LD="${LINKBIN} -lib ${lflags}"
		UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib'
		PATHTYPE=-w
		# For information on what debugtype is most useful, see:
		# http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp
		# and also
		# http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx
		# This essentially turns it all on.
		LDFLAGS_DEBUG="-debug -debugtype:cv"
		LDFLAGS_OPTIMIZE="-release"
		if test "$doWince" != "no" ; then
		    LDFLAGS_CONSOLE="-link ${lflags}"
		    LDFLAGS_WINDOW=${LDFLAGS_CONSOLE}
		else
		    LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}"
		    LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}"
		fi
	    fi

	    SHLIB_SUFFIX=".dll"
	    SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll'

	    TCL_LIB_VERSIONS_OK=nodots
    	    ;;
	AIX-*)
	    AS_IF([test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"], [
		# AIX requires the _r compiler when gcc isn't being used
		case "${CC}" in
		    *_r|*_r\ *)
			# ok ...
			;;
		    *)
			# Make sure only first arg gets _r
		    	CC=`echo "$CC" | sed -e 's/^\([[^ ]]*\)/\1_r/'`
			;;
		esac
		AC_MSG_RESULT([Using $CC for compiling with threads])
	    ])
	    LIBS="$LIBS -lc"
	    SHLIB_CFLAGS=""
	    SHLIB_SUFFIX=".so"

	    LD_LIBRARY_PATH_VAR="LIBPATH"

	    # Check to enable 64-bit flags for compiler/linker
	    AS_IF([test "$do64bit" = yes], [
		AS_IF([test "$GCC" = yes], [
		    AC_MSG_WARN([64bit mode not supported with GCC on $system])
		], [
		    do64bit_ok=yes
		    CFLAGS="$CFLAGS -q64"
		    LDFLAGS_ARCH="-q64"
		    RANLIB="${RANLIB} -X64"
		    AR="${AR} -X64"
		    SHLIB_LD_FLAGS="-b64"
		])
	    ])

	    AS_IF([test "`uname -m`" = ia64], [
		# AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC
		SHLIB_LD="/usr/ccs/bin/ld -G -z text"
		AS_IF([test "$GCC" = yes], [
		    CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
		], [
		    CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}'
		])
		LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
	    ], [
		AS_IF([test "$GCC" = yes], [
		    SHLIB_LD='${CC} -shared -Wl,-bexpall'
		], [
		    SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry"
		    LDFLAGS="$LDFLAGS -brtl"
		])
		SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}"
		CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
	    ])
	    ;;
	BeOS*)
	    SHLIB_CFLAGS="-fPIC"
	    SHLIB_LD='${CC} -nostart'
	    SHLIB_SUFFIX=".so"

	    #-----------------------------------------------------------
	    # Check for inet_ntoa in -lbind, for BeOS (which also needs
	    # -lsocket, even if the network functions are in -lnet which
	    # is always linked to, for compatibility.
	    #-----------------------------------------------------------
	    AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"])
	    ;;
	BSD/OS-4.*)
	    SHLIB_CFLAGS="-export-dynamic -fPIC"
	    SHLIB_LD='${CC} -shared'
	    SHLIB_SUFFIX=".so"
	    LDFLAGS="$LDFLAGS -export-dynamic"
	    CC_SEARCH_FLAGS=""
	    LD_SEARCH_FLAGS=""
	    ;;
	CYGWIN_*)
	    SHLIB_CFLAGS=""
	    SHLIB_LD='${CC} -shared'
	    SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -Wl,--out-implib,\$[@].a"
	    SHLIB_SUFFIX=".dll"
	    EXEEXT=".exe"
	    do64bit_ok=yes
	    CC_SEARCH_FLAGS=""
	    LD_SEARCH_FLAGS=""
	    ;;
	Haiku*)
	    LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
	    SHLIB_CFLAGS="-fPIC"
	    SHLIB_SUFFIX=".so"
	    SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}'
	    AC_CHECK_LIB(network, inet_ntoa, [LIBS="$LIBS -lnetwork"])
	    ;;
	HP-UX-*.11.*)
	    # Use updated header definitions where possible
	    AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?])
	    # TEA specific: Needed by Tcl, but not most extensions
	    #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?])
	    #LIBS="$LIBS -lxnet"               # Use the XOPEN network library

	    AS_IF([test "`uname -m`" = ia64], [
		SHLIB_SUFFIX=".so"
		# Use newer C++ library for C++ extensions
		#if test "$GCC" != "yes" ; then
		#   CPPFLAGS="-AA"
		#fi
	    ], [
		SHLIB_SUFFIX=".sl"
	    ])
	    AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no)
	    AS_IF([test "$tcl_ok" = yes], [
		LDFLAGS="$LDFLAGS -Wl,-E"
		CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.'
		LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.'
		LD_LIBRARY_PATH_VAR="SHLIB_PATH"
	    ])
	    AS_IF([test "$GCC" = yes], [
		SHLIB_LD='${CC} -shared'
		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
	    ], [
		CFLAGS="$CFLAGS -z"
		# Users may want PA-RISC 1.1/2.0 portable code - needs HP cc
		#CFLAGS="$CFLAGS +DAportable"
		SHLIB_CFLAGS="+z"
		SHLIB_LD="ld -b"
	    ])

	    # Check to enable 64-bit flags for compiler/linker
	    AS_IF([test "$do64bit" = "yes"], [
		AS_IF([test "$GCC" = yes], [
		    case `${CC} -dumpmachine` in
			hppa64*)
			    # 64-bit gcc in use.  Fix flags for GNU ld.
			    do64bit_ok=yes
			    SHLIB_LD='${CC} -shared'
			    AS_IF([test $doRpath = yes], [
				CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
			    LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
			    ;;
			*)
			    AC_MSG_WARN([64bit mode not supported with GCC on $system])
			    ;;
		    esac
		], [
		    do64bit_ok=yes
		    CFLAGS="$CFLAGS +DD64"
		    LDFLAGS_ARCH="+DD64"
		])
	    ]) ;;
	IRIX-6.*)
	    SHLIB_CFLAGS=""
	    SHLIB_LD="ld -n32 -shared -rdata_shared"
	    SHLIB_SUFFIX=".so"
	    AS_IF([test $doRpath = yes], [
		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
		LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
	    AS_IF([test "$GCC" = yes], [
		CFLAGS="$CFLAGS -mabi=n32"
		LDFLAGS="$LDFLAGS -mabi=n32"
	    ], [
		case $system in
		    IRIX-6.3)
			# Use to build 6.2 compatible binaries on 6.3.
			CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS"
			;;
		    *)
			CFLAGS="$CFLAGS -n32"
			;;
		esac
		LDFLAGS="$LDFLAGS -n32"
	    ])
	    ;;
	IRIX64-6.*)
	    SHLIB_CFLAGS=""
	    SHLIB_LD="ld -n32 -shared -rdata_shared"
	    SHLIB_SUFFIX=".so"
	    AS_IF([test $doRpath = yes], [
		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
		LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])

	    # Check to enable 64-bit flags for compiler/linker

	    AS_IF([test "$do64bit" = yes], [
	        AS_IF([test "$GCC" = yes], [
	            AC_MSG_WARN([64bit mode not supported by gcc])
	        ], [
	            do64bit_ok=yes
	            SHLIB_LD="ld -64 -shared -rdata_shared"
	            CFLAGS="$CFLAGS -64"
	            LDFLAGS_ARCH="-64"
	        ])
	    ])
	    ;;
	Linux*|GNU*|NetBSD-Debian)
	    SHLIB_CFLAGS="-fPIC"
	    SHLIB_SUFFIX=".so"

	    # TEA specific:
	    CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer"

	    # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
	    SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}'
	    LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
	    AS_IF([test $doRpath = yes], [
		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
	    LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
	    AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"])
	    AS_IF([test $do64bit = yes], [
		AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [
		    hold_cflags=$CFLAGS
		    CFLAGS="$CFLAGS -m64"
		    AC_TRY_LINK(,, tcl_cv_cc_m64=yes, tcl_cv_cc_m64=no)
		    CFLAGS=$hold_cflags])
		AS_IF([test $tcl_cv_cc_m64 = yes], [
		    CFLAGS="$CFLAGS -m64"
		    do64bit_ok=yes
		])
	   ])

	    # The combo of gcc + glibc has a bug related to inlining of
	    # functions like strtod(). The -fno-builtin flag should address
	    # this problem but it does not work. The -fno-inline flag is kind
	    # of overkill but it works. Disable inlining only when one of the
	    # files in compat/*.c is being linked in.

	    AS_IF([test x"${USE_COMPAT}" != x],[CFLAGS="$CFLAGS -fno-inline"])
	    ;;
	Lynx*)
	    SHLIB_CFLAGS="-fPIC"
	    SHLIB_SUFFIX=".so"
	    CFLAGS_OPTIMIZE=-02
	    SHLIB_LD='${CC} -shared'
	    LD_FLAGS="-Wl,--export-dynamic"
	    AS_IF([test $doRpath = yes], [
		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
		LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
	    ;;
	OpenBSD-*)
	    arch=`arch -s`
	    case "$arch" in
	    vax)
		SHLIB_SUFFIX=""
		SHARED_LIB_SUFFIX=""
		LDFLAGS=""
		;;
	    *)
		case "$arch" in
		alpha|sparc64)
		    SHLIB_CFLAGS="-fPIC"
		    ;;
		*)
		    SHLIB_CFLAGS="-fpic"
		    ;;
		esac
		SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}'
		SHLIB_SUFFIX=".so"
		AS_IF([test $doRpath = yes], [
		    CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
		SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so${SHLIB_VERSION}'
		LDFLAGS="-Wl,-export-dynamic"
		;;
	    esac
	    case "$arch" in
	    vax)
		CFLAGS_OPTIMIZE="-O1"
		;;
	    *)
		CFLAGS_OPTIMIZE="-O2"
		;;
	    esac
	    AS_IF([test "${TCL_THREADS}" = "1"], [
		# On OpenBSD:	Compile with -pthread
		#		Don't link with -lpthread
		LIBS=`echo $LIBS | sed s/-lpthread//`
		CFLAGS="$CFLAGS -pthread"
	    ])
	    # OpenBSD doesn't do version numbers with dots.
	    UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
	    TCL_LIB_VERSIONS_OK=nodots
	    ;;
	NetBSD-*)
	    # NetBSD has ELF and can use 'cc -shared' to build shared libs
	    SHLIB_CFLAGS="-fPIC"
	    SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}'
	    SHLIB_SUFFIX=".so"
	    LDFLAGS="$LDFLAGS -export-dynamic"
	    AS_IF([test $doRpath = yes], [
		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
	    LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
	    AS_IF([test "${TCL_THREADS}" = "1"], [
		# The -pthread needs to go in the CFLAGS, not LIBS
		LIBS=`echo $LIBS | sed s/-pthread//`
		CFLAGS="$CFLAGS -pthread"
	    	LDFLAGS="$LDFLAGS -pthread"
	    ])
	    ;;
	FreeBSD-*)
	    # This configuration from FreeBSD Ports.
	    SHLIB_CFLAGS="-fPIC"
	    SHLIB_LD="${CC} -shared"
	    SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -Wl,-soname,\$[@]"
	    SHLIB_SUFFIX=".so"
	    LDFLAGS=""
	    AS_IF([test $doRpath = yes], [
		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
		LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
	    AS_IF([test "${TCL_THREADS}" = "1"], [
		# The -pthread needs to go in the LDFLAGS, not LIBS
		LIBS=`echo $LIBS | sed s/-pthread//`
		CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
		LDFLAGS="$LDFLAGS $PTHREAD_LIBS"])
	    case $system in
	    FreeBSD-3.*)
		# Version numbers are dot-stripped by system policy.
		TCL_TRIM_DOTS=`echo ${PACKAGE_VERSION} | tr -d .`
		UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
		SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1'
		TCL_LIB_VERSIONS_OK=nodots
		;;
	    esac
	    ;;
	Darwin-*)
	    CFLAGS_OPTIMIZE="-Os"
	    SHLIB_CFLAGS="-fno-common"
	    # To avoid discrepancies between what headers configure sees during
	    # preprocessing tests and compiling tests, move any -isysroot and
	    # -mmacosx-version-min flags from CFLAGS to CPPFLAGS:
	    CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \
		awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \
		if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`"
	    CFLAGS="`echo " ${CFLAGS}" | \
		awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \
		if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`"
	    AS_IF([test $do64bit = yes], [
		case `arch` in
		    ppc)
			AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag],
				tcl_cv_cc_arch_ppc64, [
			    hold_cflags=$CFLAGS
			    CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5"
			    AC_TRY_LINK(,, tcl_cv_cc_arch_ppc64=yes,
				    tcl_cv_cc_arch_ppc64=no)
			    CFLAGS=$hold_cflags])
			AS_IF([test $tcl_cv_cc_arch_ppc64 = yes], [
			    CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5"
			    do64bit_ok=yes
			]);;
		    i386)
			AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag],
				tcl_cv_cc_arch_x86_64, [
			    hold_cflags=$CFLAGS
			    CFLAGS="$CFLAGS -arch x86_64"
			    AC_TRY_LINK(,, tcl_cv_cc_arch_x86_64=yes,
				    tcl_cv_cc_arch_x86_64=no)
			    CFLAGS=$hold_cflags])
			AS_IF([test $tcl_cv_cc_arch_x86_64 = yes], [
			    CFLAGS="$CFLAGS -arch x86_64"
			    do64bit_ok=yes
			]);;
		    *)
			AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);;
		esac
	    ], [
		# Check for combined 32-bit and 64-bit fat build
		AS_IF([echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \
		    && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '], [
		    fat_32_64=yes])
	    ])
	    # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
	    SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}'
	    AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [
		hold_ldflags=$LDFLAGS
		LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module"
		AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no)
		LDFLAGS=$hold_ldflags])
	    AS_IF([test $tcl_cv_ld_single_module = yes], [
		SHLIB_LD="${SHLIB_LD} -Wl,-single_module"
	    ])
	    # TEA specific: link shlib with current and compatibility version flags
	    vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([[0-9]]\{1,5\}\)\(\(\.[[0-9]]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d`
	    SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}"
	    SHLIB_SUFFIX=".dylib"
	    # Don't use -prebind when building for Mac OS X 10.4 or later only:
	    AS_IF([test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int([$]2)}'`" -lt 4 -a \
		"`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int([$]2)}'`" -lt 4], [
		LDFLAGS="$LDFLAGS -prebind"])
	    LDFLAGS="$LDFLAGS -headerpad_max_install_names"
	    AC_CACHE_CHECK([if ld accepts -search_paths_first flag],
		    tcl_cv_ld_search_paths_first, [
		hold_ldflags=$LDFLAGS
		LDFLAGS="$LDFLAGS -Wl,-search_paths_first"
		AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes,
			tcl_cv_ld_search_paths_first=no)
		LDFLAGS=$hold_ldflags])
	    AS_IF([test $tcl_cv_ld_search_paths_first = yes], [
		LDFLAGS="$LDFLAGS -Wl,-search_paths_first"
	    ])
	    AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [
		AC_DEFINE(MODULE_SCOPE, [__private_extern__],
		    [Compiler support for module scope symbols])
		tcl_cv_cc_visibility_hidden=yes
	    ])
	    CC_SEARCH_FLAGS=""
	    LD_SEARCH_FLAGS=""
	    LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH"
	    # TEA specific: for combined 32 & 64 bit fat builds of Tk
	    # extensions, verify that 64-bit build is possible.
	    AS_IF([test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"], [
		AS_IF([test "${TEA_WINDOWINGSYSTEM}" = x11], [
		    AC_CACHE_CHECK([for 64-bit X11], tcl_cv_lib_x11_64, [
			for v in CFLAGS CPPFLAGS LDFLAGS; do
			    eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"'
			done
			CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include"
			LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11"
			AC_TRY_LINK([#include <X11/Xlib.h>], [XrmInitialize();],
			    tcl_cv_lib_x11_64=yes, tcl_cv_lib_x11_64=no)
			for v in CFLAGS CPPFLAGS LDFLAGS; do
			    eval $v'="$hold_'$v'"'
			done])
		])
		AS_IF([test "${TEA_WINDOWINGSYSTEM}" = aqua], [
		    AC_CACHE_CHECK([for 64-bit Tk], tcl_cv_lib_tk_64, [
			for v in CFLAGS CPPFLAGS LDFLAGS; do
			    eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"'
			done
			CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}"
			LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}"
			AC_TRY_LINK([#include <tk.h>], [Tk_InitStubs(NULL, "", 0);],
			    tcl_cv_lib_tk_64=yes, tcl_cv_lib_tk_64=no)
			for v in CFLAGS CPPFLAGS LDFLAGS; do
			    eval $v'="$hold_'$v'"'
			done])
		])
		# remove 64-bit arch flags from CFLAGS et al. if configuration
		# does not support 64-bit.
		AS_IF([test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no], [
		    AC_MSG_NOTICE([Removing 64-bit architectures from compiler & linker flags])
		    for v in CFLAGS CPPFLAGS LDFLAGS; do
			eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"'
		    done])
	    ])
	    ;;
	OS/390-*)
	    CFLAGS_OPTIMIZE=""		# Optimizer is buggy
	    AC_DEFINE(_OE_SOCKETS, 1,	# needed in sys/socket.h
		[Should OS/390 do the right thing with sockets?])
	    ;;
	OSF1-V*)
	    # Digital OSF/1
	    SHLIB_CFLAGS=""
	    AS_IF([test "$SHARED_BUILD" = 1], [
	        SHLIB_LD='ld -shared -expect_unresolved "*"'
	    ], [
	        SHLIB_LD='ld -non_shared -expect_unresolved "*"'
	    ])
	    SHLIB_SUFFIX=".so"
	    AS_IF([test $doRpath = yes], [
		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
		LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
	    AS_IF([test "$GCC" = yes], [CFLAGS="$CFLAGS -mieee"], [
		CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee"])
	    # see pthread_intro(3) for pthread support on osf1, k.furukawa
	    AS_IF([test "${TCL_THREADS}" = 1], [
		CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE"
		CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64"
		LIBS=`echo $LIBS | sed s/-lpthreads//`
		AS_IF([test "$GCC" = yes], [
		    LIBS="$LIBS -lpthread -lmach -lexc"
		], [
		    CFLAGS="$CFLAGS -pthread"
		    LDFLAGS="$LDFLAGS -pthread"
		])
	    ])
	    ;;
	QNX-6*)
	    # QNX RTP
	    # This may work for all QNX, but it was only reported for v6.
	    SHLIB_CFLAGS="-fPIC"
	    SHLIB_LD="ld -Bshareable -x"
	    SHLIB_LD_LIBS=""
	    SHLIB_SUFFIX=".so"
	    CC_SEARCH_FLAGS=""
	    LD_SEARCH_FLAGS=""
	    ;;
	SCO_SV-3.2*)
	    AS_IF([test "$GCC" = yes], [
		SHLIB_CFLAGS="-fPIC -melf"
		LDFLAGS="$LDFLAGS -melf -Wl,-Bexport"
	    ], [
		SHLIB_CFLAGS="-Kpic -belf"
		LDFLAGS="$LDFLAGS -belf -Wl,-Bexport"
	    ])
	    SHLIB_LD="ld -G"
	    SHLIB_LD_LIBS=""
	    SHLIB_SUFFIX=".so"
	    CC_SEARCH_FLAGS=""
	    LD_SEARCH_FLAGS=""
	    ;;
	SunOS-5.[[0-6]])
	    # Careful to not let 5.10+ fall into this case

	    # Note: If _REENTRANT isn't defined, then Solaris
	    # won't define thread-safe library routines.

	    AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
	    AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
		[Do we really want to follow the standard? Yes we do!])

	    SHLIB_CFLAGS="-KPIC"
	    SHLIB_SUFFIX=".so"
	    AS_IF([test "$GCC" = yes], [
		SHLIB_LD='${CC} -shared'
		CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
	    ], [
		SHLIB_LD="/usr/ccs/bin/ld -G -z text"
		CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
	    ])
	    ;;
	SunOS-5*)
	    # Note: If _REENTRANT isn't defined, then Solaris
	    # won't define thread-safe library routines.

	    AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
	    AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
		[Do we really want to follow the standard? Yes we do!])

	    SHLIB_CFLAGS="-KPIC"

	    # Check to enable 64-bit flags for compiler/linker
	    AS_IF([test "$do64bit" = yes], [
		arch=`isainfo`
		AS_IF([test "$arch" = "sparcv9 sparc"], [
		    AS_IF([test "$GCC" = yes], [
			AS_IF([test "`${CC} -dumpversion | awk -F. '{print [$]1}'`" -lt 3], [
			    AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system])
			], [
			    do64bit_ok=yes
			    CFLAGS="$CFLAGS -m64 -mcpu=v9"
			    LDFLAGS="$LDFLAGS -m64 -mcpu=v9"
			    SHLIB_CFLAGS="-fPIC"
			])
		    ], [
			do64bit_ok=yes
			AS_IF([test "$do64bitVIS" = yes], [
			    CFLAGS="$CFLAGS -xarch=v9a"
			    LDFLAGS_ARCH="-xarch=v9a"
			], [
			    CFLAGS="$CFLAGS -xarch=v9"
			    LDFLAGS_ARCH="-xarch=v9"
			])
			# Solaris 64 uses this as well
			#LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64"
		    ])
		], [AS_IF([test "$arch" = "amd64 i386"], [
		    AS_IF([test "$GCC" = yes], [
			case $system in
			    SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*)
				do64bit_ok=yes
				CFLAGS="$CFLAGS -m64"
				LDFLAGS="$LDFLAGS -m64";;
			    *)
				AC_MSG_WARN([64bit mode not supported with GCC on $system]);;
			esac
		    ], [
			do64bit_ok=yes
			case $system in
			    SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*)
				CFLAGS="$CFLAGS -m64"
				LDFLAGS="$LDFLAGS -m64";;
			    *)
				CFLAGS="$CFLAGS -xarch=amd64"
				LDFLAGS="$LDFLAGS -xarch=amd64";;
			esac
		    ])
		], [AC_MSG_WARN([64bit mode not supported for $arch])])])
	    ])

	    SHLIB_SUFFIX=".so"
	    AS_IF([test "$GCC" = yes], [
		SHLIB_LD='${CC} -shared'
		CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
		AS_IF([test "$do64bit_ok" = yes], [
		    AS_IF([test "$arch" = "sparcv9 sparc"], [
			# We need to specify -static-libgcc or we need to
			# add the path to the sparv9 libgcc.
			# JH: static-libgcc is necessary for core Tcl, but may
			# not be necessary for extensions.
			SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc"
			# for finding sparcv9 libgcc, get the regular libgcc
			# path, remove so name and append 'sparcv9'
			#v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..."
			#CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir"
		    ], [AS_IF([test "$arch" = "amd64 i386"], [
			# JH: static-libgcc is necessary for core Tcl, but may
			# not be necessary for extensions.
			SHLIB_LD="$SHLIB_LD -m64 -static-libgcc"
		    ])])
		])
	    ], [
		case $system in
		    SunOS-5.[[1-9]][[0-9]]*)
			# TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
			SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';;
		    *)
			SHLIB_LD='/usr/ccs/bin/ld -G -z text';;
		esac
		CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
		LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
	    ])
	    ;;
	UNIX_SV* | UnixWare-5*)
	    SHLIB_CFLAGS="-KPIC"
	    SHLIB_LD='${CC} -G'
	    SHLIB_LD_LIBS=""
	    SHLIB_SUFFIX=".so"
	    # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers
	    # that don't grok the -Bexport option.  Test that it does.
	    AC_CACHE_CHECK([for ld accepts -Bexport flag], tcl_cv_ld_Bexport, [
		hold_ldflags=$LDFLAGS
		LDFLAGS="$LDFLAGS -Wl,-Bexport"
		AC_TRY_LINK(, [int i;], tcl_cv_ld_Bexport=yes, tcl_cv_ld_Bexport=no)
	        LDFLAGS=$hold_ldflags])
	    AS_IF([test $tcl_cv_ld_Bexport = yes], [
		LDFLAGS="$LDFLAGS -Wl,-Bexport"
	    ])
	    CC_SEARCH_FLAGS=""
	    LD_SEARCH_FLAGS=""
	    ;;
    esac

    AS_IF([test "$do64bit" = yes -a "$do64bit_ok" = no], [
	AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform])
    ])

dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so
dnl # until the end of configure, as configure's compile and link tests use
dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's
dnl # preprocessing tests use only CPPFLAGS.
    AC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""])

    # Add in the arch flags late to ensure it wasn't removed.
    # Not necessary in TEA, but this is aligned with core
    LDFLAGS="$LDFLAGS $LDFLAGS_ARCH"

    # If we're running gcc, then change the C flags for compiling shared
    # libraries to the right flags for gcc, instead of those for the
    # standard manufacturer compiler.

    AS_IF([test "$GCC" = yes], [
	case $system in
	    AIX-*) ;;
	    BSD/OS*) ;;
	    CYGWIN_*|MINGW32_*) ;;
	    IRIX*) ;;
	    NetBSD-*|FreeBSD-*|OpenBSD-*) ;;
	    Darwin-*) ;;
	    SCO_SV-3.2*) ;;
	    windows) ;;
	    *) SHLIB_CFLAGS="-fPIC" ;;
	esac])

    AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [
	AC_DEFINE(MODULE_SCOPE, [extern],
	    [No Compiler support for module scope symbols])
    ])

    AS_IF([test "$SHARED_LIB_SUFFIX" = ""], [
    # TEA specific: use PACKAGE_VERSION instead of VERSION
    SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}'])
    AS_IF([test "$UNSHARED_LIB_SUFFIX" = ""], [
    # TEA specific: use PACKAGE_VERSION instead of VERSION
    UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a'])

    if test "${GCC}" = "yes" -a ${SHLIB_SUFFIX} = ".dll"; then
	AC_CACHE_CHECK(for SEH support in compiler,
	    tcl_cv_seh,
	AC_TRY_RUN([
#define WIN32_LEAN_AND_MEAN
#include <windows.h>
#undef WIN32_LEAN_AND_MEAN

	    int main(int argc, char** argv) {
		int a, b = 0;
		__try {
		    a = 666 / b;
		}
		__except (EXCEPTION_EXECUTE_HANDLER) {
		    return 0;
		}
		return 1;
	    }
	],
	    tcl_cv_seh=yes,
	    tcl_cv_seh=no,
	    tcl_cv_seh=no)
	)
	if test "$tcl_cv_seh" = "no" ; then
	    AC_DEFINE(HAVE_NO_SEH, 1,
		    [Defined when mingw does not support SEH])
	fi

	#
	# Check to see if the excpt.h include file provided contains the
	# definition for EXCEPTION_DISPOSITION; if not, which is the case
	# with Cygwin's version as of 2002-04-10, define it to be int,
	# sufficient for getting the current code to work.
	#
	AC_CACHE_CHECK(for EXCEPTION_DISPOSITION support in include files,
	    tcl_cv_eh_disposition,
	    AC_TRY_COMPILE([
#	    define WIN32_LEAN_AND_MEAN
#	    include <windows.h>
#	    undef WIN32_LEAN_AND_MEAN
	    ],[
		EXCEPTION_DISPOSITION x;
	    ],
		tcl_cv_eh_disposition=yes,
		tcl_cv_eh_disposition=no)
	)
	if test "$tcl_cv_eh_disposition" = "no" ; then
	AC_DEFINE(EXCEPTION_DISPOSITION, int,
		[Defined when cygwin/mingw does not support EXCEPTION DISPOSITION])
	fi

	# Check to see if winnt.h defines CHAR, SHORT, and LONG
	# even if VOID has already been #defined. The win32api
	# used by mingw and cygwin is known to do this.

	AC_CACHE_CHECK(for winnt.h that ignores VOID define,
	    tcl_cv_winnt_ignore_void,
	    AC_TRY_COMPILE([
#define VOID void
#define WIN32_LEAN_AND_MEAN
#include <windows.h>
#undef WIN32_LEAN_AND_MEAN
	    ], [
		CHAR c;
		SHORT s;
		LONG l;
	    ],
        tcl_cv_winnt_ignore_void=yes,
        tcl_cv_winnt_ignore_void=no)
	)
	if test "$tcl_cv_winnt_ignore_void" = "yes" ; then
	    AC_DEFINE(HAVE_WINNT_IGNORE_VOID, 1,
		    [Defined when cygwin/mingw ignores VOID define in winnt.h])
	fi
    fi

	# See if the compiler supports casting to a union type.
	# This is used to stop gcc from printing a compiler
	# warning when initializing a union member.

	AC_CACHE_CHECK(for cast to union support,
	    tcl_cv_cast_to_union,
	    AC_TRY_COMPILE([],
	    [
		  union foo { int i; double d; };
		  union foo f = (union foo) (int) 0;
	    ],
	    tcl_cv_cast_to_union=yes,
	    tcl_cv_cast_to_union=no)
	)
	if test "$tcl_cv_cast_to_union" = "yes"; then
	    AC_DEFINE(HAVE_CAST_TO_UNION, 1,
		    [Defined when compiler supports casting to union type.])
	fi

    AC_SUBST(CFLAGS_DEBUG)
    AC_SUBST(CFLAGS_OPTIMIZE)
    AC_SUBST(CFLAGS_WARNING)

    AC_SUBST(STLIB_LD)
    AC_SUBST(SHLIB_LD)

    AC_SUBST(SHLIB_LD_LIBS)
    AC_SUBST(SHLIB_CFLAGS)

    AC_SUBST(LD_LIBRARY_PATH_VAR)

    # These must be called after we do the basic CFLAGS checks and
    # verify any possible 64-bit or similar switches are necessary
    TEA_TCL_EARLY_FLAGS
    TEA_TCL_64BIT_FLAGS
])

#--------------------------------------------------------------------
# TEA_SERIAL_PORT
#
#	Determine which interface to use to talk to the serial port.
#	Note that #include lines must begin in leftmost column for
#	some compilers to recognize them as preprocessor directives,
#	and some build environments have stdin not pointing at a
#	pseudo-terminal (usually /dev/null instead.)
#
# Arguments:
#	none
#
# Results:
#
#	Defines only one of the following vars:
#		HAVE_SYS_MODEM_H
#		USE_TERMIOS
#		USE_TERMIO
#		USE_SGTTY
#--------------------------------------------------------------------

AC_DEFUN([TEA_SERIAL_PORT], [
    AC_CHECK_HEADERS(sys/modem.h)
    AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [
    AC_TRY_RUN([
#include <termios.h>

int main() {
    struct termios t;
    if (tcgetattr(0, &t) == 0) {
	cfsetospeed(&t, 0);
	t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
	return 0;
    }
    return 1;
}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
    if test $tcl_cv_api_serial = no ; then
	AC_TRY_RUN([
#include <termio.h>

int main() {
    struct termio t;
    if (ioctl(0, TCGETA, &t) == 0) {
	t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
	return 0;
    }
    return 1;
}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
    fi
    if test $tcl_cv_api_serial = no ; then
	AC_TRY_RUN([
#include <sgtty.h>

int main() {
    struct sgttyb t;
    if (ioctl(0, TIOCGETP, &t) == 0) {
	t.sg_ospeed = 0;
	t.sg_flags |= ODDP | EVENP | RAW;
	return 0;
    }
    return 1;
}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
    fi
    if test $tcl_cv_api_serial = no ; then
	AC_TRY_RUN([
#include <termios.h>
#include <errno.h>

int main() {
    struct termios t;
    if (tcgetattr(0, &t) == 0
	|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
	cfsetospeed(&t, 0);
	t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
	return 0;
    }
    return 1;
}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
    fi
    if test $tcl_cv_api_serial = no; then
	AC_TRY_RUN([
#include <termio.h>
#include <errno.h>

int main() {
    struct termio t;
    if (ioctl(0, TCGETA, &t) == 0
	|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
	t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
	return 0;
    }
    return 1;
    }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
    fi
    if test $tcl_cv_api_serial = no; then
	AC_TRY_RUN([
#include <sgtty.h>
#include <errno.h>

int main() {
    struct sgttyb t;
    if (ioctl(0, TIOCGETP, &t) == 0
	|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
	t.sg_ospeed = 0;
	t.sg_flags |= ODDP | EVENP | RAW;
	return 0;
    }
    return 1;
}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none)
    fi])
    case $tcl_cv_api_serial in
	termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);;
	termio)  AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);;
	sgtty)   AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);;
    esac
])

#--------------------------------------------------------------------
# TEA_MISSING_POSIX_HEADERS
#
#	Supply substitutes for missing POSIX header files.  Special
#	notes:
#	    - stdlib.h doesn't define strtol, strtoul, or
#	      strtod in some versions of SunOS
#	    - some versions of string.h don't declare procedures such
#	      as strstr
#
# Arguments:
#	none
#
# Results:
#
#	Defines some of the following vars:
#		NO_DIRENT_H
#		NO_ERRNO_H
#		NO_VALUES_H
#		HAVE_LIMITS_H or NO_LIMITS_H
#		NO_STDLIB_H
#		NO_STRING_H
#		NO_SYS_WAIT_H
#		NO_DLFCN_H
#		HAVE_SYS_PARAM_H
#
#		HAVE_STRING_H ?
#
# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and
# CHECK on limits.h
#--------------------------------------------------------------------

AC_DEFUN([TEA_MISSING_POSIX_HEADERS], [
    AC_CACHE_CHECK([dirent.h], tcl_cv_dirent_h, [
    AC_TRY_LINK([#include <sys/types.h>
#include <dirent.h>], [
#ifndef _POSIX_SOURCE
#   ifdef __Lynx__
	/*
	 * Generate compilation error to make the test fail:  Lynx headers
	 * are only valid if really in the POSIX environment.
	 */

	missing_procedure();
#   endif
#endif
DIR *d;
struct dirent *entryPtr;
char *p;
d = opendir("foobar");
entryPtr = readdir(d);
p = entryPtr->d_name;
closedir(d);
], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)])

    if test $tcl_cv_dirent_h = no; then
	AC_DEFINE(NO_DIRENT_H, 1, [Do we have <dirent.h>?])
    fi

    # TEA specific:
    AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have <errno.h>?])])
    AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have <float.h>?])])
    AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have <values.h>?])])
    AC_CHECK_HEADER(limits.h,
	[AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have <limits.h>?])],
	[AC_DEFINE(NO_LIMITS_H, 1, [Do we have <limits.h>?])])
    AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0)
    AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0)
    AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0)
    AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0)
    if test $tcl_ok = 0; then
	AC_DEFINE(NO_STDLIB_H, 1, [Do we have <stdlib.h>?])
    fi
    AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0)
    AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0)
    AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0)

    # See also memmove check below for a place where NO_STRING_H can be
    # set and why.

    if test $tcl_ok = 0; then
	AC_DEFINE(NO_STRING_H, 1, [Do we have <string.h>?])
    fi

    AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have <sys/wait.h>?])])
    AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have <dlfcn.h>?])])

    # OS/390 lacks sys/param.h (and doesn't need it, by chance).
    AC_HAVE_HEADERS(sys/param.h)
])

#--------------------------------------------------------------------
# TEA_PATH_X
#
#	Locate the X11 header files and the X11 library archive.  Try
#	the ac_path_x macro first, but if it doesn't find the X stuff
#	(e.g. because there's no xmkmf program) then check through
#	a list of possible directories.  Under some conditions the
#	autoconf macro will return an include directory that contains
#	no include files, so double-check its result just to be safe.
#
#	This should be called after TEA_CONFIG_CFLAGS as setting the
#	LIBS line can confuse some configure macro magic.
#
# Arguments:
#	none
#
# Results:
#
#	Sets the following vars:
#		XINCLUDES
#		XLIBSW
#		PKG_LIBS (appends to)
#--------------------------------------------------------------------

AC_DEFUN([TEA_PATH_X], [
    if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then
	TEA_PATH_UNIX_X
    fi
])

AC_DEFUN([TEA_PATH_UNIX_X], [
    AC_PATH_X
    not_really_there=""
    if test "$no_x" = ""; then
	if test "$x_includes" = ""; then
	    AC_TRY_CPP([#include <X11/Xlib.h>], , not_really_there="yes")
	else
	    if test ! -r $x_includes/X11/Xlib.h; then
		not_really_there="yes"
	    fi
	fi
    fi
    if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then
	AC_MSG_CHECKING([for X11 header files])
	found_xincludes="no"
	AC_TRY_CPP([#include <X11/Xlib.h>], found_xincludes="yes", found_xincludes="no")
	if test "$found_xincludes" = "no"; then
	    dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include"
	    for i in $dirs ; do
		if test -r $i/X11/Xlib.h; then
		    AC_MSG_RESULT([$i])
		    XINCLUDES=" -I$i"
		    found_xincludes="yes"
		    break
		fi
	    done
	fi
    else
	if test "$x_includes" != ""; then
	    XINCLUDES="-I$x_includes"
	    found_xincludes="yes"
	fi
    fi
    if test "$found_xincludes" = "no"; then
	AC_MSG_RESULT([couldn't find any!])
    fi

    if test "$no_x" = yes; then
	AC_MSG_CHECKING([for X11 libraries])
	XLIBSW=nope
	dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib"
	for i in $dirs ; do
	    if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then
		AC_MSG_RESULT([$i])
		XLIBSW="-L$i -lX11"
		x_libraries="$i"
		break
	    fi
	done
    else
	if test "$x_libraries" = ""; then
	    XLIBSW=-lX11
	else
	    XLIBSW="-L$x_libraries -lX11"
	fi
    fi
    if test "$XLIBSW" = nope ; then
	AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow)
    fi
    if test "$XLIBSW" = nope ; then
	AC_MSG_RESULT([could not find any!  Using -lX11.])
	XLIBSW=-lX11
    fi
    # TEA specific:
    if test x"${XLIBSW}" != x ; then
	PKG_LIBS="${PKG_LIBS} ${XLIBSW}"
    fi
])

#--------------------------------------------------------------------
# TEA_BLOCKING_STYLE
#
#	The statements below check for systems where POSIX-style
#	non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented.
#	On these systems (mostly older ones), use the old BSD-style
#	FIONBIO approach instead.
#
# Arguments:
#	none
#
# Results:
#
#	Defines some of the following vars:
#		HAVE_SYS_IOCTL_H
#		HAVE_SYS_FILIO_H
#		USE_FIONBIO
#		O_NONBLOCK
#--------------------------------------------------------------------

AC_DEFUN([TEA_BLOCKING_STYLE], [
    AC_CHECK_HEADERS(sys/ioctl.h)
    AC_CHECK_HEADERS(sys/filio.h)
    TEA_CONFIG_SYSTEM
    AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O])
    case $system in
	OSF*)
	    AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?])
	    AC_MSG_RESULT([FIONBIO])
	    ;;
	*)
	    AC_MSG_RESULT([O_NONBLOCK])
	    ;;
    esac
])

#--------------------------------------------------------------------
# TEA_TIME_HANDLER
#
#	Checks how the system deals with time.h, what time structures
#	are used on the system, and what fields the structures have.
#
# Arguments:
#	none
#
# Results:
#
#	Defines some of the following vars:
#		USE_DELTA_FOR_TZ
#		HAVE_TM_GMTOFF
#		HAVE_TM_TZADJ
#		HAVE_TIMEZONE_VAR
#--------------------------------------------------------------------

AC_DEFUN([TEA_TIME_HANDLER], [
    AC_CHECK_HEADERS(sys/time.h)
    AC_HEADER_TIME
    AC_STRUCT_TIMEZONE

    AC_CHECK_FUNCS(gmtime_r localtime_r)

    AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [
	AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_tzadj;],
	    tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)])
    if test $tcl_cv_member_tm_tzadj = yes ; then
	AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?])
    fi

    AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [
	AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_gmtoff;],
	    tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)])
    if test $tcl_cv_member_tm_gmtoff = yes ; then
	AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?])
    fi

    #
    # Its important to include time.h in this check, as some systems
    # (like convex) have timezone functions, etc.
    #
    AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [
	AC_TRY_COMPILE([#include <time.h>],
	    [extern long timezone;
	    timezone += 1;
	    exit (0);],
	    tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)])
    if test $tcl_cv_timezone_long = yes ; then
	AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?])
    else
	#
	# On some systems (eg IRIX 6.2), timezone is a time_t and not a long.
	#
	AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [
	    AC_TRY_COMPILE([#include <time.h>],
		[extern time_t timezone;
		timezone += 1;
		exit (0);],
		tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)])
	if test $tcl_cv_timezone_time = yes ; then
	    AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?])
	fi
    fi
])

#--------------------------------------------------------------------
# TEA_BUGGY_STRTOD
#
#	Under Solaris 2.4, strtod returns the wrong value for the
#	terminating character under some conditions.  Check for this
#	and if the problem exists use a substitute procedure
#	"fixstrtod" (provided by Tcl) that corrects the error.
#	Also, on Compaq's Tru64 Unix 5.0,
#	strtod(" ") returns 0.0 instead of a failure to convert.
#
# Arguments:
#	none
#
# Results:
#
#	Might defines some of the following vars:
#		strtod (=fixstrtod)
#--------------------------------------------------------------------

AC_DEFUN([TEA_BUGGY_STRTOD], [
    AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0)
    if test "$tcl_strtod" = 1; then
	AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[
	    AC_TRY_RUN([
		extern double strtod();
		int main() {
		    char *infString="Inf", *nanString="NaN", *spaceString=" ";
		    char *term;
		    double value;
		    value = strtod(infString, &term);
		    if ((term != infString) && (term[-1] == 0)) {
			exit(1);
		    }
		    value = strtod(nanString, &term);
		    if ((term != nanString) && (term[-1] == 0)) {
			exit(1);
		    }
		    value = strtod(spaceString, &term);
		    if (term == (spaceString+1)) {
			exit(1);
		    }
		    exit(0);
		}], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy,
		    tcl_cv_strtod_buggy=buggy)])
	if test "$tcl_cv_strtod_buggy" = buggy; then
	    AC_LIBOBJ([fixstrtod])
	    USE_COMPAT=1
	    AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?])
	fi
    fi
])

#--------------------------------------------------------------------
# TEA_TCL_LINK_LIBS
#
#	Search for the libraries needed to link the Tcl shell.
#	Things like the math library (-lm) and socket stuff (-lsocket vs.
#	-lnsl) are dealt with here.
#
# Arguments:
#	Requires the following vars to be set in the Makefile:
#		DL_LIBS (not in TEA, only needed in core)
#		LIBS
#		MATH_LIBS
#
# Results:
#
#	Substitutes the following vars:
#		TCL_LIBS
#		MATH_LIBS
#
#	Might append to the following vars:
#		LIBS
#
#	Might define the following vars:
#		HAVE_NET_ERRNO_H
#--------------------------------------------------------------------

AC_DEFUN([TEA_TCL_LINK_LIBS], [
    #--------------------------------------------------------------------
    # On a few very rare systems, all of the libm.a stuff is
    # already in libc.a.  Set compiler flags accordingly.
    # Also, Linux requires the "ieee" library for math to work
    # right (and it must appear before "-lm").
    #--------------------------------------------------------------------

    AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm")
    AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"])

    #--------------------------------------------------------------------
    # Interactive UNIX requires -linet instead of -lsocket, plus it
    # needs net/errno.h to define the socket-related error codes.
    #--------------------------------------------------------------------

    AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"])
    AC_CHECK_HEADER(net/errno.h, [
	AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have <net/errno.h>?])])

    #--------------------------------------------------------------------
    #	Check for the existence of the -lsocket and -lnsl libraries.
    #	The order here is important, so that they end up in the right
    #	order in the command line generated by make.  Here are some
    #	special considerations:
    #	1. Use "connect" and "accept" to check for -lsocket, and
    #	   "gethostbyname" to check for -lnsl.
    #	2. Use each function name only once:  can't redo a check because
    #	   autoconf caches the results of the last check and won't redo it.
    #	3. Use -lnsl and -lsocket only if they supply procedures that
    #	   aren't already present in the normal libraries.  This is because
    #	   IRIX 5.2 has libraries, but they aren't needed and they're
    #	   bogus:  they goof up name resolution if used.
    #	4. On some SVR4 systems, can't use -lsocket without -lnsl too.
    #	   To get around this problem, check for both libraries together
    #	   if -lsocket doesn't work by itself.
    #--------------------------------------------------------------------

    tcl_checkBoth=0
    AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1)
    if test "$tcl_checkSocket" = 1; then
	AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt,
	    LIBS="$LIBS -lsocket", tcl_checkBoth=1)])
    fi
    if test "$tcl_checkBoth" = 1; then
	tk_oldLibs=$LIBS
	LIBS="$LIBS -lsocket -lnsl"
	AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs])
    fi
    AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname,
	    [LIBS="$LIBS -lnsl"])])

    # TEA specific: Don't perform the eval of the libraries here because
    # DL_LIBS won't be set until we call TEA_CONFIG_CFLAGS

    TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}'
    AC_SUBST(TCL_LIBS)
    AC_SUBST(MATH_LIBS)
])

#--------------------------------------------------------------------
# TEA_TCL_EARLY_FLAGS
#
#	Check for what flags are needed to be passed so the correct OS
#	features are available.
#
# Arguments:
#	None
#
# Results:
#
#	Might define the following vars:
#		_ISOC99_SOURCE
#		_LARGEFILE64_SOURCE
#		_LARGEFILE_SOURCE64
#--------------------------------------------------------------------

AC_DEFUN([TEA_TCL_EARLY_FLAG],[
    AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]),
	AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no,
	    AC_TRY_COMPILE([[#define ]$1[ 1
]$2], $3,
		[tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes,
		[tcl_cv_flag_]translit($1,[A-Z],[a-z])=no)))
    if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then
	AC_DEFINE($1, 1, [Add the ]$1[ flag when building])
	tcl_flags="$tcl_flags $1"
    fi
])

AC_DEFUN([TEA_TCL_EARLY_FLAGS],[
    AC_MSG_CHECKING([for required early compiler flags])
    tcl_flags=""
    TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include <stdlib.h>],
	[char *p = (char *)strtoll; char *q = (char *)strtoull;])
    TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include <sys/stat.h>],
	[struct stat64 buf; int i = stat64("/", &buf);])
    TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include <sys/stat.h>],
	[char *p = (char *)open64;])
    if test "x${tcl_flags}" = "x" ; then
	AC_MSG_RESULT([none])
    else
	AC_MSG_RESULT([${tcl_flags}])
    fi
])

#--------------------------------------------------------------------
# TEA_TCL_64BIT_FLAGS
#
#	Check for what is defined in the way of 64-bit features.
#
# Arguments:
#	None
#
# Results:
#
#	Might define the following vars:
#		TCL_WIDE_INT_IS_LONG
#		TCL_WIDE_INT_TYPE
#		HAVE_STRUCT_DIRENT64
#		HAVE_STRUCT_STAT64
#		HAVE_TYPE_OFF64_T
#--------------------------------------------------------------------

AC_DEFUN([TEA_TCL_64BIT_FLAGS], [
    AC_MSG_CHECKING([for 64-bit integer type])
    AC_CACHE_VAL(tcl_cv_type_64bit,[
	tcl_cv_type_64bit=none
	# See if the compiler knows natively about __int64
	AC_TRY_COMPILE(,[__int64 value = (__int64) 0;],
	    tcl_type_64bit=__int64, tcl_type_64bit="long long")
	# See if we should use long anyway  Note that we substitute in the
	# type that is our current guess for a 64-bit type inside this check
	# program, so it should be modified only carefully...
        AC_TRY_COMPILE(,[switch (0) {
            case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ;
        }],tcl_cv_type_64bit=${tcl_type_64bit})])
    if test "${tcl_cv_type_64bit}" = none ; then
	AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?])
	AC_MSG_RESULT([using long])
    elif test "${tcl_cv_type_64bit}" = "__int64" \
		-a "${TEA_PLATFORM}" = "windows" ; then
	# TEA specific: We actually want to use the default tcl.h checks in
	# this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER*
	AC_MSG_RESULT([using Tcl header defaults])
    else
	AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit},
	    [What type should be used to define wide integers?])
	AC_MSG_RESULT([${tcl_cv_type_64bit}])

	# Now check for auxiliary declarations
	AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[
	    AC_TRY_COMPILE([#include <sys/types.h>
#include <dirent.h>],[struct dirent64 p;],
		tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)])
	if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then
	    AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in <sys/types.h>?])
	fi

	AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[
	    AC_TRY_COMPILE([#include <sys/stat.h>],[struct stat64 p;
],
		tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)])
	if test "x${tcl_cv_struct_stat64}" = "xyes" ; then
	    AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in <sys/stat.h>?])
	fi

	AC_CHECK_FUNCS(open64 lseek64)
	AC_MSG_CHECKING([for off64_t])
	AC_CACHE_VAL(tcl_cv_type_off64_t,[
	    AC_TRY_COMPILE([#include <sys/types.h>],[off64_t offset;
],
		tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)])
	dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the
	dnl functions lseek64 and open64 are defined.
	if test "x${tcl_cv_type_off64_t}" = "xyes" && \
	        test "x${ac_cv_func_lseek64}" = "xyes" && \
	        test "x${ac_cv_func_open64}" = "xyes" ; then
	    AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in <sys/types.h>?])
	    AC_MSG_RESULT([yes])
	else
	    AC_MSG_RESULT([no])
	fi
    fi
])

##
## Here ends the standard Tcl configuration bits and starts the
## TEA specific functions
##

#------------------------------------------------------------------------
# TEA_INIT --
#
#	Init various Tcl Extension Architecture (TEA) variables.
#	This should be the first called TEA_* macro.
#
# Arguments:
#	none
#
# Results:
#
#	Defines and substs the following vars:
#		CYGPATH
#		EXEEXT
#	Defines only:
#		TEA_VERSION
#		TEA_INITED
#		TEA_PLATFORM (windows or unix)
#
# "cygpath" is used on windows to generate native path names for include
# files. These variables should only be used with the compiler and linker
# since they generate native path names.
#
# EXEEXT
#	Select the executable extension based on the host type.  This
#	is a lightweight replacement for AC_EXEEXT that doesn't require
#	a compiler.
#------------------------------------------------------------------------

AC_DEFUN([TEA_INIT], [
    # TEA extensions pass this us the version of TEA they think they
    # are compatible with.
    TEA_VERSION="3.9"

    AC_MSG_CHECKING([for correct TEA configuration])
    if test x"${PACKAGE_NAME}" = x ; then
	AC_MSG_ERROR([
The PACKAGE_NAME variable must be defined by your TEA configure.ac])
    fi
    if test x"$1" = x ; then
	AC_MSG_ERROR([
TEA version not specified.])
    elif test "$1" != "${TEA_VERSION}" ; then
	AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"])
    else
	AC_MSG_RESULT([ok (TEA ${TEA_VERSION})])
    fi

    # If the user did not set CFLAGS, set it now to keep macros
    # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2".
    if test "${CFLAGS+set}" != "set" ; then
	CFLAGS=""
    fi

    case "`uname -s`" in
	*win32*|*WIN32*|*MINGW32_*)
	    AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo)
	    EXEEXT=".exe"
	    TEA_PLATFORM="windows"
	    ;;
	*CYGWIN_*)
	    CYGPATH=echo
	    EXEEXT=".exe"
	    # TEA_PLATFORM is determined later in LOAD_TCLCONFIG
	    ;;
	*)
	    CYGPATH=echo
	    # Maybe we are cross-compiling....
	    case ${host_alias} in
		*mingw32*)
		EXEEXT=".exe"
		TEA_PLATFORM="windows"
		;;
	    *)
		EXEEXT=""
		TEA_PLATFORM="unix"
		;;
	    esac
	    ;;
    esac

    # Check if exec_prefix is set. If not use fall back to prefix.
    # Note when adjusted, so that TEA_PREFIX can correct for this.
    # This is needed for recursive configures, since autoconf propagates
    # $prefix, but not $exec_prefix (doh!).
    if test x$exec_prefix = xNONE ; then
	exec_prefix_default=yes
	exec_prefix=$prefix
    fi

    AC_MSG_NOTICE([configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}])

    AC_SUBST(EXEEXT)
    AC_SUBST(CYGPATH)

    # This package name must be replaced statically for AC_SUBST to work
    AC_SUBST(PKG_LIB_FILE)
    # Substitute STUB_LIB_FILE in case package creates a stub library too.
    AC_SUBST(PKG_STUB_LIB_FILE)

    # We AC_SUBST these here to ensure they are subst'ed,
    # in case the user doesn't call TEA_ADD_...
    AC_SUBST(PKG_STUB_SOURCES)
    AC_SUBST(PKG_STUB_OBJECTS)
    AC_SUBST(PKG_TCL_SOURCES)
    AC_SUBST(PKG_HEADERS)
    AC_SUBST(PKG_INCLUDES)
    AC_SUBST(PKG_LIBS)
    AC_SUBST(PKG_CFLAGS)
])

#------------------------------------------------------------------------
# TEA_ADD_SOURCES --
#
#	Specify one or more source files.  Users should check for
#	the right platform before adding to their list.
#	It is not important to specify the directory, as long as it is
#	in the generic, win or unix subdirectory of $(srcdir).
#
# Arguments:
#	one or more file names
#
# Results:
#
#	Defines and substs the following vars:
#		PKG_SOURCES
#		PKG_OBJECTS
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_SOURCES], [
    vars="$@"
    for i in $vars; do
	case $i in
	    [\$]*)
		# allow $-var names
		PKG_SOURCES="$PKG_SOURCES $i"
		PKG_OBJECTS="$PKG_OBJECTS $i"
		;;
	    *)
		# check for existence - allows for generic/win/unix VPATH
		# To add more dirs here (like 'src'), you have to update VPATH
		# in Makefile.in as well
		if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
		    -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
		    -a ! -f "${srcdir}/macosx/$i" \
		    ; then
		    AC_MSG_ERROR([could not find source file '$i'])
		fi
		PKG_SOURCES="$PKG_SOURCES $i"
		# this assumes it is in a VPATH dir
		i=`basename $i`
		# handle user calling this before or after TEA_SETUP_COMPILER
		if test x"${OBJEXT}" != x ; then
		    j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}"
		else
		    j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}"
		fi
		PKG_OBJECTS="$PKG_OBJECTS $j"
		;;
	esac
    done
    AC_SUBST(PKG_SOURCES)
    AC_SUBST(PKG_OBJECTS)
])

#------------------------------------------------------------------------
# TEA_ADD_STUB_SOURCES --
#
#	Specify one or more source files.  Users should check for
#	the right platform before adding to their list.
#	It is not important to specify the directory, as long as it is
#	in the generic, win or unix subdirectory of $(srcdir).
#
# Arguments:
#	one or more file names
#
# Results:
#
#	Defines and substs the following vars:
#		PKG_STUB_SOURCES
#		PKG_STUB_OBJECTS
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_STUB_SOURCES], [
    vars="$@"
    for i in $vars; do
	# check for existence - allows for generic/win/unix VPATH
	if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
	    -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
	    -a ! -f "${srcdir}/macosx/$i" \
	    ; then
	    AC_MSG_ERROR([could not find stub source file '$i'])
	fi
	PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i"
	# this assumes it is in a VPATH dir
	i=`basename $i`
	# handle user calling this before or after TEA_SETUP_COMPILER
	if test x"${OBJEXT}" != x ; then
	    j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}"
	else
	    j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}"
	fi
	PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j"
    done
    AC_SUBST(PKG_STUB_SOURCES)
    AC_SUBST(PKG_STUB_OBJECTS)
])

#------------------------------------------------------------------------
# TEA_ADD_TCL_SOURCES --
#
#	Specify one or more Tcl source files.  These should be platform
#	independent runtime files.
#
# Arguments:
#	one or more file names
#
# Results:
#
#	Defines and substs the following vars:
#		PKG_TCL_SOURCES
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_TCL_SOURCES], [
    vars="$@"
    for i in $vars; do
	# check for existence, be strict because it is installed
	if test ! -f "${srcdir}/$i" ; then
	    AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i'])
	fi
	PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i"
    done
    AC_SUBST(PKG_TCL_SOURCES)
])

#------------------------------------------------------------------------
# TEA_ADD_HEADERS --
#
#	Specify one or more source headers.  Users should check for
#	the right platform before adding to their list.
#
# Arguments:
#	one or more file names
#
# Results:
#
#	Defines and substs the following vars:
#		PKG_HEADERS
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_HEADERS], [
    vars="$@"
    for i in $vars; do
	# check for existence, be strict because it is installed
	if test ! -f "${srcdir}/$i" ; then
	    AC_MSG_ERROR([could not find header file '${srcdir}/$i'])
	fi
	PKG_HEADERS="$PKG_HEADERS $i"
    done
    AC_SUBST(PKG_HEADERS)
])

#------------------------------------------------------------------------
# TEA_ADD_INCLUDES --
#
#	Specify one or more include dirs.  Users should check for
#	the right platform before adding to their list.
#
# Arguments:
#	one or more file names
#
# Results:
#
#	Defines and substs the following vars:
#		PKG_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_INCLUDES], [
    vars="$@"
    for i in $vars; do
	PKG_INCLUDES="$PKG_INCLUDES $i"
    done
    AC_SUBST(PKG_INCLUDES)
])

#------------------------------------------------------------------------
# TEA_ADD_LIBS --
#
#	Specify one or more libraries.  Users should check for
#	the right platform before adding to their list.  For Windows,
#	libraries provided in "foo.lib" format will be converted to
#	"-lfoo" when using GCC (mingw).
#
# Arguments:
#	one or more file names
#
# Results:
#
#	Defines and substs the following vars:
#		PKG_LIBS
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_LIBS], [
    vars="$@"
    for i in $vars; do
	if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then
	    # Convert foo.lib to -lfoo for GCC.  No-op if not *.lib
	    i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'`
	fi
	PKG_LIBS="$PKG_LIBS $i"
    done
    AC_SUBST(PKG_LIBS)
])

#------------------------------------------------------------------------
# TEA_ADD_CFLAGS --
#
#	Specify one or more CFLAGS.  Users should check for
#	the right platform before adding to their list.
#
# Arguments:
#	one or more file names
#
# Results:
#
#	Defines and substs the following vars:
#		PKG_CFLAGS
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_CFLAGS], [
    PKG_CFLAGS="$PKG_CFLAGS $@"
    AC_SUBST(PKG_CFLAGS)
])

#------------------------------------------------------------------------
# TEA_ADD_CLEANFILES --
#
#	Specify one or more CLEANFILES.
#
# Arguments:
#	one or more file names to clean target
#
# Results:
#
#	Appends to CLEANFILES, already defined for subst in LOAD_TCLCONFIG
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_CLEANFILES], [
    CLEANFILES="$CLEANFILES $@"
])

#------------------------------------------------------------------------
# TEA_PREFIX --
#
#	Handle the --prefix=... option by defaulting to what Tcl gave
#
# Arguments:
#	none
#
# Results:
#
#	If --prefix or --exec-prefix was not specified, $prefix and
#	$exec_prefix will be set to the values given to Tcl when it was
#	configured.
#------------------------------------------------------------------------
AC_DEFUN([TEA_PREFIX], [
    if test "${prefix}" = "NONE"; then
	prefix_default=yes
	if test x"${TCL_PREFIX}" != x; then
	    AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}])
	    prefix=${TCL_PREFIX}
	else
	    AC_MSG_NOTICE([--prefix defaulting to /usr/local])
	    prefix=/usr/local
	fi
    fi
    if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \
	-o x"${exec_prefix_default}" = x"yes" ; then
	if test x"${TCL_EXEC_PREFIX}" != x; then
	    AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}])
	    exec_prefix=${TCL_EXEC_PREFIX}
	else
	    AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}])
	    exec_prefix=$prefix
	fi
    fi
])

#------------------------------------------------------------------------
# TEA_SETUP_COMPILER_CC --
#
#	Do compiler checks the way we want.  This is just a replacement
#	for AC_PROG_CC in TEA configure.ac files to make them cleaner.
#
# Arguments:
#	none
#
# Results:
#
#	Sets up CC var and other standard bits we need to make executables.
#------------------------------------------------------------------------
AC_DEFUN([TEA_SETUP_COMPILER_CC], [
    # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE)
    # in this macro, they need to go into TEA_SETUP_COMPILER instead.

    AC_PROG_CC
    AC_PROG_CPP

    INSTALL='$(SHELL) $(srcdir)/tclconfig/install-sh -c'
    INSTALL_DATA_DIR='${INSTALL} -d -m 755'
    INSTALL_DATA='${INSTALL} -m 644'
    INSTALL_PROGRAM='${INSTALL}'
    INSTALL_SCRIPT='${INSTALL}'
    INSTALL_LIBRARY='${INSTALL_DATA}'

    AC_SUBST(INSTALL)
    AC_SUBST(INSTALL_DATA_DIR)
    AC_SUBST(INSTALL_DATA)
    AC_SUBST(INSTALL_PROGRAM)
    AC_SUBST(INSTALL_SCRIPT)
    AC_SUBST(INSTALL_LIBRARY)

    #--------------------------------------------------------------------
    # Checks to see if the make program sets the $MAKE variable.
    #--------------------------------------------------------------------

    AC_PROG_MAKE_SET

    #--------------------------------------------------------------------
    # Find ranlib
    #--------------------------------------------------------------------

    AC_CHECK_TOOL(RANLIB, ranlib)

    #--------------------------------------------------------------------
    # Determines the correct binary file extension (.o, .obj, .exe etc.)
    #--------------------------------------------------------------------

    AC_OBJEXT
    AC_EXEEXT
])

#------------------------------------------------------------------------
# TEA_SETUP_COMPILER --
#
#	Do compiler checks that use the compiler.  This must go after
#	TEA_SETUP_COMPILER_CC, which does the actual compiler check.
#
# Arguments:
#	none
#
# Results:
#
#	Sets up CC var and other standard bits we need to make executables.
#------------------------------------------------------------------------
AC_DEFUN([TEA_SETUP_COMPILER], [
    # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here.
    AC_REQUIRE([TEA_SETUP_COMPILER_CC])

    #------------------------------------------------------------------------
    # If we're using GCC, see if the compiler understands -pipe. If so, use it.
    # It makes compiling go faster.  (This is only a performance feature.)
    #------------------------------------------------------------------------

    if test -z "$no_pipe" -a -n "$GCC"; then
	AC_CACHE_CHECK([if the compiler understands -pipe],
	    tcl_cv_cc_pipe, [
	    hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe"
	    AC_TRY_COMPILE(,, tcl_cv_cc_pipe=yes, tcl_cv_cc_pipe=no)
	    CFLAGS=$hold_cflags])
	if test $tcl_cv_cc_pipe = yes; then
	    CFLAGS="$CFLAGS -pipe"
	fi
    fi

    #--------------------------------------------------------------------
    # Common compiler flag setup
    #--------------------------------------------------------------------

    AC_C_BIGENDIAN
    if test "${TEA_PLATFORM}" = "unix" ; then
	TEA_TCL_LINK_LIBS
	TEA_MISSING_POSIX_HEADERS
	# Let the user call this, because if it triggers, they will
	# need a compat/strtod.c that is correct.  Users can also
	# use Tcl_GetDouble(FromObj) instead.
	#TEA_BUGGY_STRTOD
    fi
])

#------------------------------------------------------------------------
# TEA_MAKE_LIB --
#
#	Generate a line that can be used to build a shared/unshared library
#	in a platform independent manner.
#
# Arguments:
#	none
#
#	Requires:
#
# Results:
#
#	Defines the following vars:
#	CFLAGS -	Done late here to note disturb other AC macros
#       MAKE_LIB -      Command to execute to build the Tcl library;
#                       differs depending on whether or not Tcl is being
#                       compiled as a shared library.
#	MAKE_SHARED_LIB	Makefile rule for building a shared library
#	MAKE_STATIC_LIB	Makefile rule for building a static library
#	MAKE_STUB_LIB	Makefile rule for building a stub library
#	VC_MANIFEST_EMBED_DLL Makefile rule for embedded VC manifest in DLL
#	VC_MANIFEST_EMBED_EXE Makefile rule for embedded VC manifest in EXE
#------------------------------------------------------------------------

AC_DEFUN([TEA_MAKE_LIB], [
    if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then
	MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)"
	MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)"
	AC_EGREP_CPP([manifest needed], [
#if defined(_MSC_VER) && _MSC_VER >= 1400
print("manifest needed")
#endif
	], [
	# Could do a CHECK_PROG for mt, but should always be with MSVC8+
	VC_MANIFEST_EMBED_DLL="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;2 ; fi"
	VC_MANIFEST_EMBED_EXE="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;1 ; fi"
	MAKE_SHARED_LIB="${MAKE_SHARED_LIB} ; ${VC_MANIFEST_EMBED_DLL}"
	TEA_ADD_CLEANFILES([*.manifest])
	])
	MAKE_STUB_LIB="\${STLIB_LD} -nodefaultlib -out:\[$]@ \$(PKG_STUB_OBJECTS)"
    else
	MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)"
	MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}"
	MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)"
    fi

    if test "${SHARED_BUILD}" = "1" ; then
	MAKE_LIB="${MAKE_SHARED_LIB} "
    else
	MAKE_LIB="${MAKE_STATIC_LIB} "
    fi

    #--------------------------------------------------------------------
    # Shared libraries and static libraries have different names.
    # Use the double eval to make sure any variables in the suffix is
    # substituted. (@@@ Might not be necessary anymore)
    #--------------------------------------------------------------------

    if test "${TEA_PLATFORM}" = "windows" ; then
	if test "${SHARED_BUILD}" = "1" ; then
	    # We force the unresolved linking of symbols that are really in
	    # the private libraries of Tcl and Tk.
	    if test x"${TK_BIN_DIR}" != x ; then
		SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\""
	    fi
	    SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\""
	    if test "$GCC" = "yes"; then
		SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -static-libgcc"
	    fi
	    eval eval "PKG_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}"
	else
	    eval eval "PKG_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}"
	    if test "$GCC" = "yes"; then
		PKG_LIB_FILE=lib${PKG_LIB_FILE}
	    fi
	fi
	# Some packages build their own stubs libraries
	eval eval "PKG_STUB_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}"
	if test "$GCC" = "yes"; then
	    PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE}
	fi
	# These aren't needed on Windows (either MSVC or gcc)
	RANLIB=:
	RANLIB_STUB=:
    else
	RANLIB_STUB="${RANLIB}"
	if test "${SHARED_BUILD}" = "1" ; then
	    SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}"
	    if test x"${TK_BIN_DIR}" != x ; then
		SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}"
	    fi
	    eval eval "PKG_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}"
	    RANLIB=:
	else
	    eval eval "PKG_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}"
	fi
	# Some packages build their own stubs libraries
	eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}"
    fi

    # These are escaped so that only CFLAGS is picked up at configure time.
    # The other values will be substituted at make time.
    CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}"
    if test "${SHARED_BUILD}" = "1" ; then
	CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}"
    fi

    AC_SUBST(MAKE_LIB)
    AC_SUBST(MAKE_SHARED_LIB)
    AC_SUBST(MAKE_STATIC_LIB)
    AC_SUBST(MAKE_STUB_LIB)
    AC_SUBST(RANLIB_STUB)
    AC_SUBST(VC_MANIFEST_EMBED_DLL)
    AC_SUBST(VC_MANIFEST_EMBED_EXE)
])

#------------------------------------------------------------------------
# TEA_LIB_SPEC --
#
#	Compute the name of an existing object library located in libdir
#	from the given base name and produce the appropriate linker flags.
#
# Arguments:
#	basename	The base name of the library without version
#			numbers, extensions, or "lib" prefixes.
#	extra_dir	Extra directory in which to search for the
#			library.  This location is used first, then
#			$prefix/$exec-prefix, then some defaults.
#
# Requires:
#	TEA_INIT and TEA_PREFIX must be called first.
#
# Results:
#
#	Defines the following vars:
#		${basename}_LIB_NAME	The computed library name.
#		${basename}_LIB_SPEC	The computed linker flags.
#------------------------------------------------------------------------

AC_DEFUN([TEA_LIB_SPEC], [
    AC_MSG_CHECKING([for $1 library])

    # Look in exec-prefix for the library (defined by TEA_PREFIX).

    tea_lib_name_dir="${exec_prefix}/lib"

    # Or in a user-specified location.

    if test x"$2" != x ; then
	tea_extra_lib_dir=$2
    else
	tea_extra_lib_dir=NONE
    fi

    for i in \
	    `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
	    `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \
	    `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
	    `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \
	    `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \
	    `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \
	    `ls -dr /usr/lib64/$1[[0-9]]*.lib 2>/dev/null ` \
	    `ls -dr /usr/lib64/lib$1[[0-9]]* 2>/dev/null ` \
	    `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \
	    `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do
	if test -f "$i" ; then
	    tea_lib_name_dir=`dirname $i`
	    $1_LIB_NAME=`basename $i`
	    $1_LIB_PATH_NAME=$i
	    break
	fi
    done

    if test "${TEA_PLATFORM}" = "windows"; then
	$1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\"
    else
	# Strip off the leading "lib" and trailing ".a" or ".so"

	tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'`
	$1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}"
    fi

    if test "x${$1_LIB_NAME}" = x ; then
	AC_MSG_ERROR([not found])
    else
	AC_MSG_RESULT([${$1_LIB_SPEC}])
    fi
])

#------------------------------------------------------------------------
# TEA_PRIVATE_TCL_HEADERS --
#
#	Locate the private Tcl include files
#
# Arguments:
#
#	Requires:
#		TCL_SRC_DIR	Assumes that TEA_LOAD_TCLCONFIG has
#				already been called.
#
# Results:
#
#	Substitutes the following vars:
#		TCL_TOP_DIR_NATIVE
#		TCL_INCLUDES
#------------------------------------------------------------------------

AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [
    # Allow for --with-tclinclude to take effect and define ${ac_cv_c_tclh}
    AC_REQUIRE([TEA_PUBLIC_TCL_HEADERS])
    AC_MSG_CHECKING([for Tcl private include files])

    TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}`
    TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\"

    # Check to see if tcl<Plat>Port.h isn't already with the public headers
    # Don't look for tclInt.h because that resides with tcl.h in the core
    # sources, but the <plat>Port headers are in a different directory
    if test "${TEA_PLATFORM}" = "windows" -a \
	-f "${ac_cv_c_tclh}/tclWinPort.h"; then
	result="private headers found with public headers"
    elif test "${TEA_PLATFORM}" = "unix" -a \
	-f "${ac_cv_c_tclh}/tclUnixPort.h"; then
	result="private headers found with public headers"
    else
	TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\"
	if test "${TEA_PLATFORM}" = "windows"; then
	    TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\"
	else
	    TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\"
	fi
	# Overwrite the previous TCL_INCLUDES as this should capture both
	# public and private headers in the same set.
	# We want to ensure these are substituted so as not to require
	# any *_NATIVE vars be defined in the Makefile
	TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}"
	if test "`uname -s`" = "Darwin"; then
            # If Tcl was built as a framework, attempt to use
            # the framework's Headers and PrivateHeaders directories
            case ${TCL_DEFS} in
	    	*TCL_FRAMEWORK*)
		    if test -d "${TCL_BIN_DIR}/Headers" -a \
			    -d "${TCL_BIN_DIR}/PrivateHeaders"; then
			TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}"
		    else
			TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`"
		    fi
	            ;;
	    esac
	    result="Using ${TCL_INCLUDES}"
	else
	    if test ! -f "${TCL_SRC_DIR}/generic/tclInt.h" ; then
		AC_MSG_ERROR([Cannot find private header tclInt.h in ${TCL_SRC_DIR}])
	    fi
	    result="Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}"
	fi
    fi

    AC_SUBST(TCL_TOP_DIR_NATIVE)

    AC_SUBST(TCL_INCLUDES)
    AC_MSG_RESULT([${result}])
])

#------------------------------------------------------------------------
# TEA_PUBLIC_TCL_HEADERS --
#
#	Locate the installed public Tcl header files
#
# Arguments:
#	None.
#
# Requires:
#	CYGPATH must be set
#
# Results:
#
#	Adds a --with-tclinclude switch to configure.
#	Result is cached.
#
#	Substitutes the following vars:
#		TCL_INCLUDES
#------------------------------------------------------------------------

AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [
    AC_MSG_CHECKING([for Tcl public headers])

    AC_ARG_WITH(tclinclude, [  --with-tclinclude       directory containing the public Tcl header files], with_tclinclude=${withval})

    AC_CACHE_VAL(ac_cv_c_tclh, [
	# Use the value from --with-tclinclude, if it was given

	if test x"${with_tclinclude}" != x ; then
	    if test -f "${with_tclinclude}/tcl.h" ; then
		ac_cv_c_tclh=${with_tclinclude}
	    else
		AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h])
	    fi
	else
	    list=""
	    if test "`uname -s`" = "Darwin"; then
		# If Tcl was built as a framework, attempt to use
		# the framework's Headers directory
		case ${TCL_DEFS} in
		    *TCL_FRAMEWORK*)
			list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`"
			;;
		esac
	    fi

	    # Look in the source dir only if Tcl is not installed,
	    # and in that situation, look there before installed locations.
	    if test -f "${TCL_BIN_DIR}/Makefile" ; then
		list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`"
	    fi

	    # Check order: pkg --prefix location, Tcl's --prefix location,
	    # relative to directory of tclConfig.sh.

	    eval "temp_includedir=${includedir}"
	    list="$list \
		`ls -d ${temp_includedir}        2>/dev/null` \
		`ls -d ${TCL_PREFIX}/include     2>/dev/null` \
		`ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`"
	    if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then
		list="$list /usr/local/include /usr/include"
		if test x"${TCL_INCLUDE_SPEC}" != x ; then
		    d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'`
		    list="$list `ls -d ${d} 2>/dev/null`"
		fi
	    fi
	    for i in $list ; do
		if test -f "$i/tcl.h" ; then
		    ac_cv_c_tclh=$i
		    break
		fi
	    done
	fi
    ])

    # Print a message based on how we determined the include path

    if test x"${ac_cv_c_tclh}" = x ; then
	AC_MSG_ERROR([tcl.h not found.  Please specify its location with --with-tclinclude])
    else
	AC_MSG_RESULT([${ac_cv_c_tclh}])
    fi

    # Convert to a native path and substitute into the output files.

    INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}`

    TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"

    AC_SUBST(TCL_INCLUDES)
])

#------------------------------------------------------------------------
# TEA_PRIVATE_TK_HEADERS --
#
#	Locate the private Tk include files
#
# Arguments:
#
#	Requires:
#		TK_SRC_DIR	Assumes that TEA_LOAD_TKCONFIG has
#				 already been called.
#
# Results:
#
#	Substitutes the following vars:
#		TK_INCLUDES
#------------------------------------------------------------------------

AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [
    # Allow for --with-tkinclude to take effect and define ${ac_cv_c_tkh}
    AC_REQUIRE([TEA_PUBLIC_TK_HEADERS])
    AC_MSG_CHECKING([for Tk private include files])

    TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}`
    TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\"

    # Check to see if tk<Plat>Port.h isn't already with the public headers
    # Don't look for tkInt.h because that resides with tk.h in the core
    # sources, but the <plat>Port headers are in a different directory
    if test "${TEA_PLATFORM}" = "windows" -a \
	-f "${ac_cv_c_tkh}/tkWinPort.h"; then
	result="private headers found with public headers"
    elif test "${TEA_PLATFORM}" = "unix" -a \
	-f "${ac_cv_c_tkh}/tkUnixPort.h"; then
	result="private headers found with public headers"
    else
	TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\"
	TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\"
	if test "${TEA_PLATFORM}" = "windows"; then
	    TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\"
	else
	    TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\"
	fi
	# Overwrite the previous TK_INCLUDES as this should capture both
	# public and private headers in the same set.
	# We want to ensure these are substituted so as not to require
	# any *_NATIVE vars be defined in the Makefile
	TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}"
	# Detect and add ttk subdir
	if test -d "${TK_SRC_DIR}/generic/ttk"; then
	   TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/generic/ttk\""
	fi
	if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then
	   TK_INCLUDES="${TK_INCLUDES} -I\"${TK_XLIB_DIR_NATIVE}\""
	fi
	if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then
	   TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/macosx\""
	fi
	if test "`uname -s`" = "Darwin"; then
	    # If Tk was built as a framework, attempt to use
	    # the framework's Headers and PrivateHeaders directories
	    case ${TK_DEFS} in
		*TK_FRAMEWORK*)
			if test -d "${TK_BIN_DIR}/Headers" -a \
				-d "${TK_BIN_DIR}/PrivateHeaders"; then
			    TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}"
			else
			    TK_INCLUDES="${TK_INCLUDES} ${TK_INCLUDE_SPEC} `echo "${TK_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`"
			fi
			;;
	    esac
	    result="Using ${TK_INCLUDES}"
	else
	    if test ! -f "${TK_SRC_DIR}/generic/tkInt.h" ; then
	       AC_MSG_ERROR([Cannot find private header tkInt.h in ${TK_SRC_DIR}])
	    fi
	    result="Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}"
	fi
    fi

    AC_SUBST(TK_TOP_DIR_NATIVE)
    AC_SUBST(TK_XLIB_DIR_NATIVE)

    AC_SUBST(TK_INCLUDES)
    AC_MSG_RESULT([${result}])
])

#------------------------------------------------------------------------
# TEA_PUBLIC_TK_HEADERS --
#
#	Locate the installed public Tk header files
#
# Arguments:
#	None.
#
# Requires:
#	CYGPATH must be set
#
# Results:
#
#	Adds a --with-tkinclude switch to configure.
#	Result is cached.
#
#	Substitutes the following vars:
#		TK_INCLUDES
#------------------------------------------------------------------------

AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [
    AC_MSG_CHECKING([for Tk public headers])

    AC_ARG_WITH(tkinclude, [  --with-tkinclude        directory containing the public Tk header files], with_tkinclude=${withval})

    AC_CACHE_VAL(ac_cv_c_tkh, [
	# Use the value from --with-tkinclude, if it was given

	if test x"${with_tkinclude}" != x ; then
	    if test -f "${with_tkinclude}/tk.h" ; then
		ac_cv_c_tkh=${with_tkinclude}
	    else
		AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h])
	    fi
	else
	    list=""
	    if test "`uname -s`" = "Darwin"; then
		# If Tk was built as a framework, attempt to use
		# the framework's Headers directory.
		case ${TK_DEFS} in
		    *TK_FRAMEWORK*)
			list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`"
			;;
		esac
	    fi

	    # Look in the source dir only if Tk is not installed,
	    # and in that situation, look there before installed locations.
	    if test -f "${TK_BIN_DIR}/Makefile" ; then
		list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`"
	    fi

	    # Check order: pkg --prefix location, Tk's --prefix location,
	    # relative to directory of tkConfig.sh, Tcl's --prefix location,
	    # relative to directory of tclConfig.sh.

	    eval "temp_includedir=${includedir}"
	    list="$list \
		`ls -d ${temp_includedir}        2>/dev/null` \
		`ls -d ${TK_PREFIX}/include      2>/dev/null` \
		`ls -d ${TK_BIN_DIR}/../include  2>/dev/null` \
		`ls -d ${TCL_PREFIX}/include     2>/dev/null` \
		`ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`"
	    if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then
		list="$list /usr/local/include /usr/include"
		if test x"${TK_INCLUDE_SPEC}" != x ; then
		    d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'`
		    list="$list `ls -d ${d} 2>/dev/null`"
		fi
	    fi
	    for i in $list ; do
		if test -f "$i/tk.h" ; then
		    ac_cv_c_tkh=$i
		    break
		fi
	    done
	fi
    ])

    # Print a message based on how we determined the include path

    if test x"${ac_cv_c_tkh}" = x ; then
	AC_MSG_ERROR([tk.h not found.  Please specify its location with --with-tkinclude])
    else
	AC_MSG_RESULT([${ac_cv_c_tkh}])
    fi

    # Convert to a native path and substitute into the output files.

    INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}`

    TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"

    AC_SUBST(TK_INCLUDES)

    if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then
	# On Windows and Aqua, we need the X compat headers
	AC_MSG_CHECKING([for X11 header files])
	if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then
	    INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`"
	    TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
	    AC_SUBST(TK_XINCLUDES)
	fi
	AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}])
    fi
])

#------------------------------------------------------------------------
# TEA_PATH_CONFIG --
#
#	Locate the ${1}Config.sh file and perform a sanity check on
#	the ${1} compile flags.  These are used by packages like
#	[incr Tk] that load *Config.sh files from more than Tcl and Tk.
#
# Arguments:
#	none
#
# Results:
#
#	Adds the following arguments to configure:
#		--with-$1=...
#
#	Defines the following vars:
#		$1_BIN_DIR	Full path to the directory containing
#				the $1Config.sh file
#------------------------------------------------------------------------

AC_DEFUN([TEA_PATH_CONFIG], [
    #
    # Ok, lets find the $1 configuration
    # First, look for one uninstalled.
    # the alternative search directory is invoked by --with-$1
    #

    if test x"${no_$1}" = x ; then
	# we reset no_$1 in case something fails here
	no_$1=true
	AC_ARG_WITH($1, [  --with-$1              directory containing $1 configuration ($1Config.sh)], with_$1config=${withval})
	AC_MSG_CHECKING([for $1 configuration])
	AC_CACHE_VAL(ac_cv_c_$1config,[

	    # First check to see if --with-$1 was specified.
	    if test x"${with_$1config}" != x ; then
		case ${with_$1config} in
		    */$1Config.sh )
			if test -f ${with_$1config}; then
			    AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself])
			    with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'`
			fi;;
		esac
		if test -f "${with_$1config}/$1Config.sh" ; then
		    ac_cv_c_$1config=`(cd ${with_$1config}; pwd)`
		else
		    AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh])
		fi
	    fi

	    # then check for a private $1 installation
	    if test x"${ac_cv_c_$1config}" = x ; then
		for i in \
			../$1 \
			`ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
			`ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
			`ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \
			`ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
			../../$1 \
			`ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
			`ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
			`ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \
			`ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
			../../../$1 \
			`ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
			`ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
			`ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \
			`ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
			${srcdir}/../$1 \
			`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
			`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
			`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \
			`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
			; do
		    if test -f "$i/$1Config.sh" ; then
			ac_cv_c_$1config=`(cd $i; pwd)`
			break
		    fi
		    if test -f "$i/unix/$1Config.sh" ; then
			ac_cv_c_$1config=`(cd $i/unix; pwd)`
			break
		    fi
		done
	    fi

	    # check in a few common install locations
	    if test x"${ac_cv_c_$1config}" = x ; then
		for i in `ls -d ${libdir} 2>/dev/null` \
			`ls -d ${exec_prefix}/lib 2>/dev/null` \
			`ls -d ${prefix}/lib 2>/dev/null` \
			`ls -d /usr/local/lib 2>/dev/null` \
			`ls -d /usr/contrib/lib 2>/dev/null` \
			`ls -d /usr/lib 2>/dev/null` \
			`ls -d /usr/lib64 2>/dev/null` \
			; do
		    if test -f "$i/$1Config.sh" ; then
			ac_cv_c_$1config=`(cd $i; pwd)`
			break
		    fi
		done
	    fi
	])

	if test x"${ac_cv_c_$1config}" = x ; then
	    $1_BIN_DIR="# no $1 configs found"
	    AC_MSG_WARN([Cannot find $1 configuration definitions])
	    exit 0
	else
	    no_$1=
	    $1_BIN_DIR=${ac_cv_c_$1config}
	    AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh])
	fi
    fi
])

#------------------------------------------------------------------------
# TEA_LOAD_CONFIG --
#
#	Load the $1Config.sh file
#
# Arguments:
#
#	Requires the following vars to be set:
#		$1_BIN_DIR
#
# Results:
#
#	Substitutes the following vars:
#		$1_SRC_DIR
#		$1_LIB_FILE
#		$1_LIB_SPEC
#------------------------------------------------------------------------

AC_DEFUN([TEA_LOAD_CONFIG], [
    AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh])

    if test -f "${$1_BIN_DIR}/$1Config.sh" ; then
        AC_MSG_RESULT([loading])
	. "${$1_BIN_DIR}/$1Config.sh"
    else
        AC_MSG_RESULT([file not found])
    fi

    #
    # If the $1_BIN_DIR is the build directory (not the install directory),
    # then set the common variable name to the value of the build variables.
    # For example, the variable $1_LIB_SPEC will be set to the value
    # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC
    # instead of $1_BUILD_LIB_SPEC since it will work with both an
    # installed and uninstalled version of Tcl.
    #

    if test -f "${$1_BIN_DIR}/Makefile" ; then
	AC_MSG_WARN([Found Makefile - using build library specs for $1])
        $1_LIB_SPEC=${$1_BUILD_LIB_SPEC}
        $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC}
        $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH}
        $1_INCLUDE_SPEC=${$1_BUILD_INCLUDE_SPEC}
        $1_LIBRARY_PATH=${$1_LIBRARY_PATH}
    fi

    AC_SUBST($1_VERSION)
    AC_SUBST($1_BIN_DIR)
    AC_SUBST($1_SRC_DIR)

    AC_SUBST($1_LIB_FILE)
    AC_SUBST($1_LIB_SPEC)

    AC_SUBST($1_STUB_LIB_FILE)
    AC_SUBST($1_STUB_LIB_SPEC)
    AC_SUBST($1_STUB_LIB_PATH)

    # Allow the caller to prevent this auto-check by specifying any 2nd arg
    AS_IF([test "x$2" = x], [
	# Check both upper and lower-case variants
	# If a dev wanted non-stubs libs, this function could take an option
	# to not use _STUB in the paths below
	AS_IF([test "x${$1_STUB_LIB_SPEC}" = x],
	    [TEA_LOAD_CONFIG_LIB(translit($1,[a-z],[A-Z])_STUB)],
	    [TEA_LOAD_CONFIG_LIB($1_STUB)])
    ])
])

#------------------------------------------------------------------------
# TEA_LOAD_CONFIG_LIB --
#
#	Helper function to load correct library from another extension's
#	${PACKAGE}Config.sh.
#
# Results:
#	Adds to LIBS the appropriate extension library
#------------------------------------------------------------------------
AC_DEFUN([TEA_LOAD_CONFIG_LIB], [
    AC_MSG_CHECKING([For $1 library for LIBS])
    # This simplifies the use of stub libraries by automatically adding
    # the stub lib to your path.  Normally this would add to SHLIB_LD_LIBS,
    # but this is called before CONFIG_CFLAGS.  More importantly, this adds
    # to PKG_LIBS, which becomes LIBS, and that is only used by SHLIB_LD.
    if test "x${$1_LIB_SPEC}" != "x" ; then
	if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then
	    TEA_ADD_LIBS([\"`${CYGPATH} ${$1_LIB_PATH}`\"])
	    AC_MSG_RESULT([using $1_LIB_PATH ${$1_LIB_PATH}])
	else
	    TEA_ADD_LIBS([${$1_LIB_SPEC}])
	    AC_MSG_RESULT([using $1_LIB_SPEC ${$1_LIB_SPEC}])
	fi
    else
	AC_MSG_RESULT([file not found])
    fi
])

#------------------------------------------------------------------------
# TEA_EXPORT_CONFIG --
#
#	Define the data to insert into the ${PACKAGE}Config.sh file
#
# Arguments:
#
#	Requires the following vars to be set:
#		$1
#
# Results:
#	Substitutes the following vars:
#------------------------------------------------------------------------

AC_DEFUN([TEA_EXPORT_CONFIG], [
    #--------------------------------------------------------------------
    # These are for $1Config.sh
    #--------------------------------------------------------------------

    # pkglibdir must be a fully qualified path and (not ${exec_prefix}/lib)
    eval pkglibdir="[$]{libdir}/$1${PACKAGE_VERSION}"
    if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then
	eval $1_LIB_FLAG="-l$1${PACKAGE_VERSION}${DBGX}"
	eval $1_STUB_LIB_FLAG="-l$1stub${PACKAGE_VERSION}${DBGX}"
    else
	eval $1_LIB_FLAG="-l$1`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}"
	eval $1_STUB_LIB_FLAG="-l$1stub`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}"
    fi
    $1_BUILD_LIB_SPEC="-L`pwd` ${$1_LIB_FLAG}"
    $1_LIB_SPEC="-L${pkglibdir} ${$1_LIB_FLAG}"
    $1_BUILD_STUB_LIB_SPEC="-L`pwd` [$]{$1_STUB_LIB_FLAG}"
    $1_STUB_LIB_SPEC="-L${pkglibdir} [$]{$1_STUB_LIB_FLAG}"
    $1_BUILD_STUB_LIB_PATH="`pwd`/[$]{PKG_STUB_LIB_FILE}"
    $1_STUB_LIB_PATH="${pkglibdir}/[$]{PKG_STUB_LIB_FILE}"

    AC_SUBST($1_BUILD_LIB_SPEC)
    AC_SUBST($1_LIB_SPEC)
    AC_SUBST($1_BUILD_STUB_LIB_SPEC)
    AC_SUBST($1_STUB_LIB_SPEC)
    AC_SUBST($1_BUILD_STUB_LIB_PATH)
    AC_SUBST($1_STUB_LIB_PATH)

    AC_SUBST(MAJOR_VERSION)
    AC_SUBST(MINOR_VERSION)
    AC_SUBST(PATCHLEVEL)
])


#------------------------------------------------------------------------
# TEA_PATH_CELIB --
#
#	Locate Keuchel's celib emulation layer for targeting Win/CE
#
# Arguments:
#	none
#
# Results:
#
#	Adds the following arguments to configure:
#		--with-celib=...
#
#	Defines the following vars:
#		CELIB_DIR	Full path to the directory containing
#				the include and platform lib files
#------------------------------------------------------------------------

AC_DEFUN([TEA_PATH_CELIB], [
    # First, look for one uninstalled.
    # the alternative search directory is invoked by --with-celib

    if test x"${no_celib}" = x ; then
	# we reset no_celib in case something fails here
	no_celib=true
	AC_ARG_WITH(celib,[  --with-celib=DIR        use Windows/CE support library from DIR], with_celibconfig=${withval})
	AC_MSG_CHECKING([for Windows/CE celib directory])
	AC_CACHE_VAL(ac_cv_c_celibconfig,[
	    # First check to see if --with-celibconfig was specified.
	    if test x"${with_celibconfig}" != x ; then
		if test -d "${with_celibconfig}/inc" ; then
		    ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)`
		else
		    AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory])
		fi
	    fi

	    # then check for a celib library
	    if test x"${ac_cv_c_celibconfig}" = x ; then
		for i in \
			../celib-palm-3.0 \
			../celib \
			../../celib-palm-3.0 \
			../../celib \
			`ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \
			${srcdir}/../celib-palm-3.0 \
			${srcdir}/../celib \
			`ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \
			; do
		    if test -d "$i/inc" ; then
			ac_cv_c_celibconfig=`(cd $i; pwd)`
			break
		    fi
		done
	    fi
	])
	if test x"${ac_cv_c_celibconfig}" = x ; then
	    AC_MSG_ERROR([Cannot find celib support library directory])
	else
	    no_celib=
	    CELIB_DIR=${ac_cv_c_celibconfig}
	    CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'`
	    AC_MSG_RESULT([found $CELIB_DIR])
	fi
    fi
])
# Local Variables:
# mode: autoconf
# End: